B2580:04 Code - Headlamp High Beam Control Circuit Open
Quick Answer
The B2580:04 diagnostic trouble code (DTC) indicates that there is an open circuit in the headlamp high beam control system. Common causes include Corrosion or damage to the wiring harness, Loose or disconnected electrical connectors, Faulty high beam control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2580:04 indicates Headlamp High Beam Control Circuit Open.
- Common causes
- Common causes include Corrosion or damage to the wiring harness, Loose or disconnected electrical connectors, Faulty high beam control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B2580:04 Description
The B2580:04 diagnostic trouble code (DTC) indicates that there is an open circuit in the headlamp high beam control system. This means that there is a break or discontinuity in the electrical circuit that controls the high beam function of the headlamps. The high beam control circuit is responsible for activating the high beams when the driver switches from low beams to high beams.
Common Causes of B2580:04
- Corrosion or damage to the wiring harness.
- Loose or disconnected electrical connectors.
- Faulty high beam control module.
- Blown fuse related to the high beam circuit.
- Electrical short circuit in the high beam control system.
Symptoms of B2580:04
- High beams not turning on or functioning intermittently.
- High beam indicator on the dashboard staying illuminated.
- Flickering or dim high beams.
- High beams turning off unexpectedly.
- Other electrical issues related to the high beam control circuit.
How to Fix B2580:04
- Begin by visually inspecting the wiring harness and connectors for any signs of damage, corrosion, or loose connections.
- Use a multimeter to test the continuity of the high beam control circuit to identify the location of the open circuit.
- Repair or replace any damaged wiring, connectors, or components in the high beam control circuit.
- Reset the vehicle's computer system to clear the DTC and test the high beams to ensure they are functioning properly.
- If the issue persists, consult a professional technician for further diagnosis and repair.
Cost to Fix B2580:04
The typical repair costs for addressing a B2580:04 DTC can vary depending on the extent of the damage and the specific components that need to be repaired or replaced. In general, the cost of parts for this repair can range from $50 to $200, while labor costs can range from $100 to $300. Keep in mind that these are rough estimates, and actual costs may vary based on factors such as the vehicle make and model, the location of the repair shop, and the technician's hourly labor rates. It is recommended to obtain quotes from local auto repair shops to get a more accurate cost estimate for addressing this issue.
Tech Notes for B2580:04
B2580:02 High Beam Control Circuit Short to Ground
B2580:04 High Beam Control Circuit Open
Need more information about the B2580:04 code?
Need more information on how to fix the B2580:04 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2580:04 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2580:04 Code
No Frequently Asked Questions about B2580:04 Code found.
Discuss the causes and fixes for B2580:04 OBDII Code
Code B2580:04 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.