B2535 Code - Right Rear Turn Lamp Circuit Failure
Quick Answer
The B2535 diagnostic trouble code (DTC) indicates a failure in the right rear turn lamp circuit of the vehicle. Common causes include Burnt out turn signal bulb, Faulty turn signal relay, Wiring issues or shorts in the right rear turn lamp circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2535 indicates Right Rear Turn Lamp Circuit Failure.
- Common causes
- Common causes include Burnt out turn signal bulb, Faulty turn signal relay, Wiring issues or shorts in the right rear turn lamp circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B2535 Description
The B2535 diagnostic trouble code (DTC) indicates a failure in the right rear turn lamp circuit of the vehicle. This means that there is an issue with the electrical system that controls the right rear turn signal. When this code is triggered, it typically means that the turn signal on the right side of the vehicle is not functioning correctly. This can be a safety hazard as it affects the visibility of the vehicle to other drivers on the road.
Common Causes of B2535
- Burnt out turn signal bulb
- Faulty turn signal relay
- Wiring issues or shorts in the right rear turn lamp circuit
- Corrosion in the electrical connections
- Faulty turn signal switch
Symptoms of B2535
- Right rear turn signal not working
- Rapid blinking of turn signal
- Turn signal indicator on dashboard flashing quickly
- Dim or flickering right rear turn signal
- Check engine light illuminated on the dashboard
How to Fix B2535
- Inspect the right rear turn signal bulb and replace if burnt out.
- Check the turn signal relay for proper functioning and replace if necessary.
- Inspect the wiring in the right rear turn lamp circuit for any damage or shorts.
- Clean or replace any corroded electrical connections in the circuit.
- Test the turn signal switch for proper operation and replace if faulty.
Cost to Fix B2535
The typical repair costs for a right rear turn lamp circuit failure can range from $50 to $200, depending on the specific cause of the issue and the cost of parts and labor. It is important to note that the actual cost can vary based on the location, make and model of the vehicle, and the labor rates at the auto repair shop. It is recommended to get a detailed estimate from a qualified mechanic before proceeding with the repair.
Need more information about the B2535 code?
Need more information on how to fix the B2535 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2535 code diagnosed by a professional: Find a repair shop in your area
Code B2535 Information for Specific Makes
- B2535 Lexus — Tonneau Cover Switch Malfunction
Frequently Asked Questions about B2535 Code
1. What are the common symptoms of OBDII code B2535 (Right Rear Turn Lamp Circuit Failure)?
- The common symptoms include the right rear turn signal not functioning properly, fast blinking of the turn signal indicator, or a warning light on the dashboard.
2. What are the possible causes of OBDII code B2535?
- The code B2535 can be triggered by a faulty right rear turn signal bulb, a damaged wiring harness, a defective turn signal relay, or a malfunctioning body control module.
3. How can I diagnose the cause of OBDII code B2535?
- To diagnose the issue, you can start by visually inspecting the right rear turn signal bulb, checking the wiring for any visible damage, testing the turn signal relay, and using a multimeter to check for continuity in the circuit.
4. Can a blown fuse cause OBDII code B2535?
- While a blown fuse is not a common cause of B2535, it is still a possibility. Check the fuse related to the right rear turn signal circuit to rule out this potential issue.
5. What are some repair tips for fixing OBDII code B2535?
- Replace the right rear turn signal bulb if it is burnt out, repair or replace any damaged wiring, test and replace the turn signal relay if necessary, and reset the fault code using an OBDII scanner after completing the repairs.
6. Is it safe to continue driving with OBDII code B2535?
- It is not recommended to drive with a malfunctioning turn signal, as it can pose a safety hazard to you and other drivers on the road. Promptly address the issue to ensure proper signaling while driving.
7. How much does it typically cost to repair OBDII code B2535?
- The cost of repairing B2535 can vary depending on the underlying cause of the issue, the cost of parts, and labor rates. It is advisable to consult with a professional mechanic for an accurate estimate.
8. Can moisture or water damage cause OBDII code B2535?
- Yes, moisture or water ingress into the right rear turn signal assembly can lead to corrosion of the bulb socket or wiring, resulting in the circuit failure indicated by code B2535.
9. Will disconnecting the battery reset OBDII code B2535?
- Disconnecting the battery may reset the fault code temporarily, but if the underlying issue is not addressed and repaired, the code is likely to reappear once the problem is detected again by the vehicle's system.
10. How can I prevent OBDII code B2535 from recurring in the future?
- To prevent the reoccurrence of B2535, regularly inspect the condition of all turn signal bulbs, keep the electrical connections clean and free of corrosion, and promptly address any issues with the turn signal system to maintain its proper functionality.
Discuss the causes and fixes for B2535 OBDII Code
Code B2535 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.