B2390 Dodge Code - Mist Switch Circuit Low
Quick Answer
The B2390 diagnostic trouble code for Dodge vehicles refers to the Mist Switch Circuit Low. Common causes include Faulty mist switch component, Wiring issues or loose connections in the mist switch circuit, Corrosion or damage to the electrical components related to the mist switch. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2390 Dodge indicates Mist Switch Circuit Low.
- Common causes
- Common causes include Faulty mist switch component, Wiring issues or loose connections in the mist switch circuit, Corrosion or damage to the electrical components related to the mist switch.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B2390 Dodge Description
The B2390 diagnostic trouble code for Dodge vehicles refers to the Mist Switch Circuit Low. This code indicates that there is a problem with the mist switch circuit in the vehicle. The mist switch is a component of the windshield wiper system that allows the driver to activate a single wipe of the windshield without turning on the wipers continuously. When this circuit is registering a low voltage or resistance, it can lead to issues with the proper functioning of the mist switch.
Common Causes of B2390 Dodge
- Faulty mist switch component.
- Wiring issues or loose connections in the mist switch circuit.
- Corrosion or damage to the electrical components related to the mist switch.
- Water intrusion or moisture affecting the circuit.
- Defective control module responsible for the mist switch operation.
Symptoms of B2390 Dodge
- Inability to activate a single wipe of the windshield using the mist switch.
- Erratic behavior of the mist switch, such as intermittent operation.
- Malfunctioning windshield wiper system or wipers not responding correctly.
- Warning light on the dashboard indicating a problem with the wiper system.
How to Fix B2390 Dodge
- Begin by inspecting the mist switch and its wiring connections for any visible damage or corrosion. Clean or replace any compromised components.
- Test the mist switch circuit using a multimeter to check for proper voltage and resistance levels. Repair or replace any faulty wiring or connections.
- Check the control module associated with the mist switch for any malfunctions. Replace the module if necessary.
- Clear the diagnostic trouble code using an OBD-II scanner and ensure that the mist switch is now functioning correctly.
- Test the windshield wiper system to confirm that the mist switch is operating as expected.
Cost to Fix B2390 Dodge
The typical repair costs for addressing a Mist Switch Circuit Low issue in a Dodge vehicle can vary depending on the extent of the problem and the specific components that need to be replaced. On average, the repair for this type of issue can range from $100 to $300, including parts and labor. However, it's important to note that the actual costs may differ based on the location of the repair shop, the make and model of the vehicle, and the expertise required for the repair. It's recommended to consult with a professional mechanic for a more accurate cost estimate tailored to your specific situation.
Need more information about the B2390 Dodge code?
Need more information on how to fix the B2390 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2390 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2390 Dodge Code
1. What does the OBDII code B2390 mean on a Dodge vehicle?
The B2390 code indicates a "Mist Switch Circuit Low" fault, meaning the wiper mist switch circuit is showing low voltage or an electrical issue.
2. What are common symptoms of the B2390 code?
Symptoms include the wipers not functioning properly in mist mode, intermittent wiper operation failure, or dashboard warning lights related to the body control module.
3. What causes the B2390 Mist Switch Circuit Low code?
Common causes include a faulty mist switch, damaged wiring, corroded connectors, or issues with the body control module (BCM).
4. How can I troubleshoot the B2390 code on my Dodge?
Inspect the mist switch and its wiring for damage or corrosion. Use a multimeter to check for proper voltage and continuity in the circuit.
5. Can a faulty mist switch trigger the B2390 code?
Yes, a defective mist switch is a primary cause of this code and should be tested or replaced if necessary.
6. Is driving with the B2390 code safe?
While it’s generally safe to drive, limited or malfunctioning windshield wipers can become a safety hazard in poor weather conditions.
7. How do I fix the B2390 code?
Repairs may include replacing the mist switch, repairing damaged wiring, cleaning corroded connectors, or reprogramming the BCM if needed.
8. How much does it cost to repair the B2390 Mist Switch Circuit Low code?
Costs vary, but a mist switch replacement typically ranges from $50 to $150, while BCM repairs or reprogramming may cost more.
9. Can a dead battery cause the B2390 code?
A weak or dead battery can sometimes cause electrical issues, but it's not a common cause of this specific code.
10. Do I need a professional mechanic to fix the B2390 code?
If you're comfortable with electrical diagnostics, you can attempt the repair yourself. Otherwise, a professional mechanic is recommended for BCM-related issues.
Discuss the causes and fixes for B2390 Dodge OBDII Code
Code B2390 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.