Engine-Codes.com
Engine-Codes – Dodge – B2340 Dodge

B2340 Dodge Code - Front/Rear Washer Motor Control Circuit Open

Quick Answer

The B2340 diagnostic trouble code (DTC) indicates an issue with the front or rear washer motor control circuit in Dodge vehicles. Common causes include Open or damaged wiring in the washer motor control circuit, Faulty washer motor that has failed to operate, Corroded or loose electrical connectors affecting the circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2340 Dodge indicates Front/Rear Washer Motor Control Circuit Open.
Common causes
Common causes include Open or damaged wiring in the washer motor control circuit, Faulty washer motor that has failed to operate, Corroded or loose electrical connectors affecting the circuit.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Oct 09, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B2340 Dodge Description

The B2340 diagnostic trouble code (DTC) indicates an issue with the front or rear washer motor control circuit in Dodge vehicles. This code is triggered when the vehicle's onboard diagnostic system detects an open circuit in the wiring or components that control the washer motor. The washer motor is responsible for spraying washer fluid onto the windshield or rear window to enhance visibility during inclement weather. When this circuit is open, the washer motor cannot receive the necessary electrical signals to operate, leading to a failure in the washer system.

OBDII Code B2340 Dodge - Front/Rear Washer Motor Control Circuit Open
B2340 Dodge Code - Front/Rear Washer Motor Control Circuit Open

Common Causes of B2340 Dodge

  1. Open or damaged wiring in the washer motor control circuit.
  2. Faulty washer motor that has failed to operate.
  3. Corroded or loose electrical connectors affecting the circuit.
  4. Malfunctioning washer switch that fails to send the signal to the motor.
  5. Blown fuses in the washer motor circuit, preventing power from reaching the motor.

Symptoms of B2340 Dodge

  1. Washer fluid does not spray onto the windshield or rear window.
  2. Washer motor does not engage when the washer switch is activated.
  3. Warning lights or messages on the dashboard indicating a washer system malfunction.
  4. Unusual noises coming from the washer motor area when attempting to activate the system.
  5. Fluid reservoir may remain full, indicating that the system is not functioning properly.

How to Fix B2340 Dodge

  1. Visual Inspection: Begin by visually inspecting the wiring and connectors associated with the washer motor circuit for any signs of damage, corrosion, or loose connections.
  2. Check Fuses: Locate and check the fuses related to the washer motor circuit. Replace any blown fuses and retest the system.
  3. Test the Washer Motor: Use a multimeter to test the washer motor for continuity and proper voltage. If the motor is faulty, it will need to be replaced.
  4. Repair or Replace Wiring: If damaged wiring is found, repair or replace the affected sections to restore continuity in the circuit.
  5. Inspect the Washer Switch: Test the washer switch for proper operation. If it is malfunctioning, replace it to ensure the motor receives the correct signals.

Cost to Fix B2340 Dodge

The typical repair costs for addressing the B2340 code can vary widely based on the specific issue and the labor involved. On average, repairs may range from $100 to $400, depending on whether it involves simple wiring repairs or the replacement of the washer motor. Labor costs can vary significantly; most auto repair shops charge between $80 and $150 per hour. In metropolitan areas or at dealerships, rates may be higher, while independent shops might offer lower rates. It's advisable to check local rates and obtain a detailed estimate based on the specific diagnosis and required repairs for your vehicle.

Need more information about the B2340 Dodge code?

Need more information on how to fix the B2340 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2340 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2340 Dodge Code

1. What does the OBDII code B2340 mean on a Dodge vehicle?

The B2340 code indicates an open circuit in the front or rear washer motor control, meaning the motor is not receiving proper electrical power.

2. What are the common symptoms of the B2340 code?

Symptoms include the windshield washer fluid not spraying, malfunctioning front or rear washer motors, and possible warning lights on the dashboard.

3. What causes the B2340 code to appear?

Common causes include a faulty washer motor, damaged wiring or connectors, a blown fuse, or a malfunctioning washer switch.

4. How can I diagnose the B2340 code?

Start by inspecting the washer motor's wiring and connectors for damage or corrosion, check the fuse, and test the motor and switch for proper operation using a multimeter.

5. Can I drive with the B2340 code active?

Yes, but it is unsafe in poor visibility conditions, as the windshield washer system may not function properly.

6. How do I fix the B2340 code?

Repairs may involve replacing the washer motor, repairing damaged wiring, cleaning corroded connectors, or replacing a blown fuse or faulty washer switch.

7. How much does it cost to fix the B2340 code?

Costs vary depending on the issue, but replacing a washer motor typically costs $50–$150, while wiring repairs can cost $20–$200, depending on labor.

8. Can a blown fuse cause the B2340 code?

Yes, a blown fuse can interrupt the washer motor's power supply, triggering the code.

9. How can I prevent the B2340 code from recurring?

Regularly inspect and maintain the washer motor system, keep connectors clean and dry, and avoid overloading the washer system.

10. Is the B2340 code specific to Dodge vehicles?

While the code format is standard, the B2340 code specifically applies to Dodge vehicles and refers to their washer motor control circuit.

Discuss the causes and fixes for B2340 Dodge OBDII Code

Submit a New Comment

Code B2340 Dodge comments

No comments found for this page.