B2319 Dodge Code - Wiper Hi/Low Control Circuit Open
Quick Answer
The B2319 code indicates a malfunction in the wiper hi/low control circuit of a Dodge vehicle. Common causes include Damaged or frayed wiring in the wiper control circuit, Faulty wiper motor that fails to respond to control signals, Defective wiper control switch that does not send the correct signals. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2319 Dodge indicates Wiper Hi/Low Control Circuit Open.
- Common causes
- Common causes include Damaged or frayed wiring in the wiper control circuit, Faulty wiper motor that fails to respond to control signals, Defective wiper control switch that does not send the correct signals.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B2319 Dodge Description
The B2319 code indicates a malfunction in the wiper hi/low control circuit of a Dodge vehicle. This code is triggered when the vehicle's onboard diagnostic system detects an open circuit in the control mechanism that regulates the wiper motor's speed settings. The wiper system is crucial for maintaining visibility during adverse weather conditions, and any failure in this system can significantly affect driving safety.
Common Causes of B2319 Dodge
- Damaged or frayed wiring in the wiper control circuit.
- Faulty wiper motor that fails to respond to control signals.
- Defective wiper control switch that does not send the correct signals.
- Poor connections or corrosion at connectors within the wiper circuit.
- Malfunctioning Body Control Module (BCM) that fails to process wiper commands.
Symptoms of B2319 Dodge
- Wipers do not operate at all.
- Wipers operate only at one speed (either high or low).
- Wipers may intermittently stop or start unexpectedly.
- Wiper control switch feels loose or unresponsive.
- Warning lights may illuminate on the dashboard related to the wiper system.
How to Fix B2319 Dodge
- Visual Inspection: Begin with a thorough visual inspection of the wiper motor, control switch, and wiring harness for any visible damage, corrosion, or loose connections.
- Test the Wiper Motor: Use a multimeter to check for continuity in the wiper motor and ensure that it receives power when the switch is activated.
- Check the Control Switch: Test the wiper control switch for proper operation. If it is faulty, replace it with a new unit.
- Inspect Wiring and Connectors: Examine the wiring and connectors for any signs of wear or damage. Repair or replace any compromised components.
- Scan for Additional Codes: Use an OBD-II scanner to check for any additional diagnostic trouble codes that may indicate related issues within the vehicle’s electrical system.
Cost to Fix B2319 Dodge
** The typical repair costs for addressing a B2319 code can range from $150 to $500, depending on the specific cause of the issue. This estimate includes parts such as a new wiper motor or control switch, which can cost between $50 and $200, along with labor costs that may range from $80 to $150 per hour. The total repair time can vary, but it typically takes 1 to 3 hours to diagnose and fix the problem.
Need more information about the B2319 Dodge code?
Need more information on how to fix the B2319 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2319 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2319 Dodge Code
1. What does the OBDII code B2319 mean on a Dodge vehicle?
The B2319 code indicates an open circuit in the Wiper Hi/Low Control Circuit, meaning the system is unable to properly control the high and low speeds of the windshield wipers.
2. What are the common symptoms of the B2319 code?
Symptoms include windshield wipers not working at all, functioning only at one speed, or being stuck in high or low speed without proper control.
3. What causes the B2319 code to appear?
Common causes include damaged wiring or connectors in the wiper control circuit, a faulty wiper motor, a defective wiper switch, or blown fuses.
4. Can I drive my car with the B2319 code active?
While the vehicle may still be drivable, impaired wiper functionality can hinder visibility during rain or snow, making it unsafe to drive in such conditions.
5. How do I diagnose the B2319 code?
Diagnosis involves inspecting the wiring and connectors in the wiper circuit, testing the wiper motor and switch for proper function, and checking for blown fuses or relays.
6. How can the B2319 code be fixed?
Repairs may include replacing damaged wiring or connectors, repairing or replacing the wiper motor, replacing a faulty wiper switch, or replacing blown fuses or relays.
7. How much does it cost to fix the B2319 code?
Repair costs can vary widely depending on the issue, ranging from $50-$150 for minor wiring repairs to $200-$400 for wiper motor or switch replacement.
8. Can a faulty wiper motor trigger the B2319 code?
Yes, a defective wiper motor can disrupt the high/low control circuit and trigger the B2319 code.
9. Will clearing the B2319 code solve the problem?
Clearing the code without addressing the underlying issue will not fix the problem, and the code is likely to return.
10. Can I diagnose the B2319 code without professional tools?
Basic inspections like checking fuses, relays, and visible wiring can be done without special tools, but a multimeter or scan tool is needed for a thorough diagnosis.
Discuss the causes and fixes for B2319 Dodge OBDII Code
Code B2319 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.