Engine-Codes.com
Engine-Codes – Chrysler – B2307 Chrysler

B2307 Chrysler Code - Washer Switch Input Circuit Low

Quick Answer

The B2307 Chrysler diagnostic trouble code (DTC) specifically refers to the Washer Switch Input Circuit Low. Common causes include Faulty washer switch, Wiring or connector issues in the washer switch input circuit, Corrosion or damage to the washer switch input circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2307 Chrysler indicates Washer Switch Input Circuit Low.
Common causes
Common causes include Faulty washer switch, Wiring or connector issues in the washer switch input circuit, Corrosion or damage to the washer switch input circuit.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 14, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B2307 Chrysler Description

The B2307 Chrysler diagnostic trouble code (DTC) specifically refers to the Washer Switch Input Circuit Low. This code indicates that the powertrain control module (PCM) has detected a lower than expected voltage signal from the washer switch input circuit. The washer switch is a component of the windshield wiper system that allows the driver to activate the windshield washer fluid to clean the windshield. When the PCM receives a low voltage signal from this switch, it may not be able to properly control the windshield wiper system, leading to potential issues with visibility and safety while driving.

OBDII Code B2307 Chrysler - Washer Switch Input Circuit Low
B2307 Chrysler Code - Washer Switch Input Circuit Low

Common Causes of B2307 Chrysler

  1. Faulty washer switch
  2. Wiring or connector issues in the washer switch input circuit
  3. Corrosion or damage to the washer switch input circuit
  4. Defective PCM
  5. Electrical issues within the vehicle's wiring system

Symptoms of B2307 Chrysler

  1. Inoperative windshield washer system
  2. Inability to activate windshield wipers
  3. Malfunctioning windshield wiper fluid pump
  4. Warning light on the dashboard indicating a washer switch input circuit issue

How to Fix B2307 Chrysler

  1. Begin by conducting a visual inspection of the washer switch and its surrounding wiring to check for any visible damage or corrosion.
  2. Test the washer switch using a multimeter to determine if it is functioning properly and sending the correct voltage signal to the PCM.
  3. Inspect the wiring and connectors in the washer switch input circuit for any breaks, frays, or loose connections. Repair or replace any damaged components as needed.
  4. If the issue persists, test the PCM to ensure it is receiving the correct signals from the washer switch input circuit. Replace the PCM if necessary.
  5. Clear the DTC from the PCM's memory using a diagnostic scan tool and test the windshield wiper system to ensure proper functionality.

Cost to Fix B2307 Chrysler

The typical repair costs for addressing the B2307 Chrysler code can vary depending on the specific cause of the issue and the extent of the repairs needed. In general, replacing a faulty washer switch or repairing wiring/connectors may cost between $100 to $300, including parts and labor. However, if the PCM needs to be replaced, the cost can range from $300 to $800 or more. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate based on your vehicle make and model.

Need more information about the B2307 Chrysler code?

Need more information on how to fix the B2307 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2307 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2307 Chrysler Code

1. What are the common symptoms of OBDII code B2307 Chrysler (Washer Switch Input Circuit Low)?

- The common symptoms include malfunctioning windshield washer system, inoperative washer fluid pump, and failure of the wiper system to activate.

2. What are the possible causes of OBDII code B2307 Chrysler?

- The code B2307 Chrysler (Washer Switch Input Circuit Low) is typically caused by a faulty washer switch, damaged wiring in the washer switch circuit, or a defective body control module.

3. How can I diagnose the root cause of OBDII code B2307 Chrysler?

- To diagnose the issue, you can use a scan tool to retrieve the trouble codes, inspect the washer switch wiring for damage, test the washer switch for proper functionality, and check the body control module for any faults.

4. Can I still drive my vehicle with OBDII code B2307 Chrysler?

- It is not recommended to drive your vehicle with the code B2307 Chrysler as it can lead to safety concerns due to the inoperative windshield washer system and wipers.

5. How can I repair OBDII code B2307 Chrysler?

- Repairing the code B2307 Chrysler involves replacing the faulty washer switch, repairing any damaged wiring in the switch circuit, or reprogramming the body control module if necessary.

6. Are there any DIY tips for fixing OBDII code B2307 Chrysler?

- DIY tips include checking the fuse related to the washer system, cleaning the washer switch contacts, and ensuring all connections in the circuit are secure and free of corrosion.

7. Will resetting the OBDII code B2307 Chrysler resolve the issue?

- Resetting the code may temporarily clear the warning light, but it will not fix the underlying problem causing the code. It's essential to diagnose and repair the root cause.

8. How much does it cost to repair OBDII code B2307 Chrysler at a repair shop?

- The cost of repairing the code B2307 Chrysler can vary depending on the exact cause of the issue, but it typically ranges from $100 to $300 for parts and labor.

9. Can extreme weather conditions trigger OBDII code B2307 Chrysler?

- Extreme weather conditions such as heavy rain, snow, or temperature fluctuations can potentially exacerbate issues with the washer switch circuit, leading to the code B2307 Chrysler.

10. Is OBDII code B2307 Chrysler a common problem in Chrysler vehicles?

- While not as common as some other OBDII codes, the B2307 Chrysler code can occur in Chrysler vehicles, particularly in older models or those with high mileage.

Discuss the causes and fixes for B2307 Chrysler OBDII Code

Submit a New Comment

Code B2307 Chrysler comments

No comments found for this page.