Engine-Codes.com
Engine-Codes – Dodge – B2208 Dodge

B2208 Dodge Code - Occupant Restraint Controller Internal 2

Quick Answer

The B2208 code for Dodge vehicles refers to the Occupant Restraint Controller Internal 2. Common causes include Wiring harness damage or corrosion, Faulty ORC module, Malfunctioning crash sensors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2208 Dodge indicates Occupant Restraint Controller Internal 2.
Common causes
Common causes include Wiring harness damage or corrosion, Faulty ORC module, Malfunctioning crash sensors.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 09, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B2208 Dodge Description

The B2208 code for Dodge vehicles refers to the Occupant Restraint Controller Internal 2. This code indicates a problem with the internal circuitry of the Occupant Restraint Controller (ORC) system, which is a crucial component of the vehicle's safety system. The ORC system is responsible for deploying airbags in the event of a collision to protect the vehicle occupants. When this code is triggered, it means that there is a malfunction within the ORC system that could potentially compromise the proper deployment of airbags in case of an accident.

OBDII Code B2208 Dodge - Occupant Restraint Controller Internal 2
B2208 Dodge Code - Occupant Restraint Controller Internal 2

Common Causes of B2208 Dodge

  1. Wiring harness damage or corrosion
  2. Faulty ORC module
  3. Malfunctioning crash sensors
  4. Loose or disconnected connections within the ORC system
  5. Software issues with the ORC system

Symptoms of B2208 Dodge

  1. Airbag warning light illuminated on the dashboard
  2. Airbags failing to deploy in a collision
  3. Constant chime or warning message indicating an issue with the airbag system
  4. Issues with the seat belt pretensioners not engaging properly
  5. Inconsistent or erratic deployment of airbags during testing

How to Fix B2208 Dodge

  1. Diagnose the specific cause of the B2208 code using a professional OBD-II scanner
  2. Inspect the wiring harness for any damage or corrosion and repair or replace as needed
  3. Check the connections and ensure they are secure and properly connected
  4. Test the ORC module and crash sensors for proper functionality and replace if necessary
  5. Clear the B2208 code from the system and perform a test to ensure the issue has been resolved

Cost to Fix B2208 Dodge

The typical repair costs for addressing the B2208 code can vary depending on the specific cause of the issue. On average, the repair for this type of problem can range from $200 to $500, including parts and labor. However, it's important to note that the actual cost could be higher if more extensive repairs or replacements are needed. Additionally, the diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate.

Need more information about the B2208 Dodge code?

Need more information on how to fix the B2208 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2208 Dodge code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2208 Dodge Code

1. What does the OBDII code B2208 mean on a Dodge?

The B2208 code indicates an "Occupant Restraint Controller Internal 2" fault, meaning the vehicle's Occupant Restraint Controller (ORC) has detected an internal error.

2. What are the symptoms of the B2208 code in a Dodge vehicle?

Common symptoms include the airbag warning light illuminating on the dashboard and the airbag system being disabled.

3. What causes the B2208 code to appear?

The code is typically caused by a malfunction within the Occupant Restraint Controller (ORC), software corruption, electrical issues such as damaged wiring or connectors, or a failed ORC module.

4. Is it safe to drive with the B2208 code active?

No, it is not safe to drive with this code active, as the airbag system may not function properly in the event of a collision.

5. How is the B2208 code diagnosed?

A mechanic will use a scan tool to confirm the code, inspect the ORC module, check for damaged wiring or connectors, and verify any relevant software updates.

6. Can the B2208 code be fixed by resetting the system?

Resetting the system may temporarily clear the code, but the underlying issue must be addressed for a permanent fix.

7. How do you repair the B2208 code in a Dodge?

Repairs may include replacing the Occupant Restraint Controller module, repairing damaged wiring or connectors, or reprogramming the module if applicable.

8. How much does it cost to fix the B2208 code on a Dodge?

Repair costs vary but may range from $300 to $1,000, depending on whether the ORC module needs replacement or other repairs are required.

9. Can the B2208 code trigger accidentally after an airbag deployment?

Yes, if the airbags have deployed, the ORC module may need to be replaced or reprogrammed, which can trigger this code.

10. Do I need a professional to fix the B2208 code?

Yes, it is recommended to have a trained technician repair this issue due to the complexity of the airbag system and safety concerns.

Discuss the causes and fixes for B2208 Dodge OBDII Code

Submit a New Comment

Code B2208 Dodge comments

No comments found for this page.