B2148 Chevrolet Code - Outside Rearview Mirror Position Sensor Input Voltage Low
Quick Answer
The B2148 Chevrolet diagnostic trouble code (DTC) indicates that the outside rearview mirror position sensor input voltage is low. Common causes include Failed outside rearview mirror position sensor, Wiring issues such as a short circuit or open circuit, Faulty control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2148 Chevrolet indicates Outside Rearview Mirror Position Sensor Input Voltage Low.
- Common causes
- Common causes include Failed outside rearview mirror position sensor, Wiring issues such as a short circuit or open circuit, Faulty control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B2148 Chevrolet Description
The B2148 Chevrolet diagnostic trouble code (DTC) indicates that the outside rearview mirror position sensor input voltage is low. This sensor is responsible for detecting the position of the outside rearview mirror and sending this information to the vehicle's control module. When the sensor detects that the input voltage is lower than the specified range, it triggers the B2148 code.
Common Causes of B2148 Chevrolet
- Failed outside rearview mirror position sensor.
- Wiring issues such as a short circuit or open circuit.
- Faulty control module.
- Corrosion or damage to sensor connectors.
- Electrical issues within the mirror system.
Symptoms of B2148 Chevrolet
- Inability to adjust the outside rearview mirror.
- Erratic movement of the mirror when attempting to adjust it.
- Warning light on the dashboard related to the mirror system.
- Mirror position not holding after adjustment.
How to Fix B2148 Chevrolet
- Begin by diagnosing the specific cause of the low voltage input using a diagnostic scanner to retrieve the trouble codes.
- Inspect the outside rearview mirror position sensor and its wiring for any visible damage or corrosion. Replace the sensor if necessary.
- Check the wiring harness for any shorts or open circuits. Repair or replace damaged wiring as needed.
- Test the control module to ensure it is functioning correctly. Replace the control module if it is found to be faulty.
- Clear the DTCs from the vehicle's memory and test the mirror system to ensure proper operation.
Cost to Fix B2148 Chevrolet
The typical repair costs for addressing a B2148 Chevrolet code can vary depending on the specific cause of the issue. Replacement of the outside rearview mirror position sensor may cost between $50 and $150, while repairing wiring issues could range from $100 to $300. If the control module needs to be replaced, this could add an additional $200 to $500 to the total repair cost. Labor rates at auto repair shops typically range from $80 to $150 per hour, so the total cost will also depend on the amount of time required for diagnosis and repair. It is recommended to consult with a qualified mechanic to obtain a more accurate estimate based on your vehicle's make and model, as well as the local labor rates in your area.
Need more information about the B2148 Chevrolet code?
Need more information on how to fix the B2148 Chevrolet code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2148 Chevrolet code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2148 Chevrolet Code
1. What does the OBDII code B2148 mean for a Chevrolet vehicle?
B2148 indicates that the input voltage from the outside rearview mirror position sensor is lower than the expected range.
2. What are the common symptoms of the B2148 code in a Chevrolet?
Common symptoms include unresponsive or erratic movement of the power side mirrors and possible dimming or malfunction of mirror-integrated features like turn signals.
3. What causes the B2148 code to appear?
The code can be caused by a faulty mirror position sensor, damaged wiring, corroded connectors, or issues with the control module.
4. Can I still drive my Chevrolet with the B2148 code?
Yes, this code generally doesn’t affect drivability, but the side mirrors may not adjust properly, which can impact visibility and safety.
5. How do I diagnose the B2148 code in a Chevrolet?
Diagnose the code by inspecting the wiring and connectors to the mirror, testing the position sensor for proper voltage, and using a scan tool to monitor the sensor's data.
6. How can I fix the B2148 code on my Chevrolet?
Repairs may include replacing the mirror position sensor, repairing damaged wiring, cleaning corroded connectors, or reprogramming the control module if necessary.
7. How much does it cost to repair the B2148 code?
The cost varies depending on the issue, but replacing a mirror position sensor typically costs $100–$300, including parts and labor.
8. Can a blown fuse cause the B2148 code in a Chevrolet?
Yes, a blown fuse in the mirror control circuit can result in low voltage and trigger the B2148 code.
9. Do I need to replace the entire mirror assembly for a B2148 code?
Not necessarily. If the issue is isolated to the position sensor or wiring, you can replace or repair those components without replacing the entire mirror.
10. Can clearing the B2148 code fix the issue?
Clearing the code without addressing the underlying problem will only temporarily erase it. The code will return if the issue isn’t resolved.
Discuss the causes and fixes for B2148 Chevrolet OBDII Code
Code B2148 Chevrolet comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.