B2113 Chrysler Code - 5 Volt Supply Circuit Low
Quick Answer
The B2113 Chrysler code indicates that there is a low voltage condition in the 5-volt supply circuit of the vehicle. Common causes include Damaged wiring or connectors in the 5-volt supply circuit, Short circuit in a sensor or module connected to the 5-volt supply, Faulty ECM or power supply module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2113 Chrysler indicates 5 Volt Supply Circuit Low.
- Common causes
- Common causes include Damaged wiring or connectors in the 5-volt supply circuit, Short circuit in a sensor or module connected to the 5-volt supply, Faulty ECM or power supply module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B2113 Chrysler Description
The B2113 Chrysler code indicates that there is a low voltage condition in the 5-volt supply circuit of the vehicle. The 5-volt supply circuit is crucial for various components in the vehicle, such as sensors and modules, to function properly. When the voltage in this circuit drops below the specified range, it can lead to malfunctions in these components, affecting the overall performance of the vehicle.
Common Causes of B2113 Chrysler
- Damaged wiring or connectors in the 5-volt supply circuit
- Short circuit in a sensor or module connected to the 5-volt supply
- Faulty ECM or power supply module
- Corrosion or poor connections in the circuit
- Overloading of the circuit due to aftermarket modifications
Symptoms of B2113 Chrysler
- Check engine light illuminated on the dashboard
- Rough idling or engine misfires
- Loss of power or acceleration
- Inaccurate readings from sensors (e.g., throttle position sensor, oxygen sensor)
- Difficulty starting the vehicle
How to Fix B2113 Chrysler
- Begin by conducting a thorough inspection of the wiring and connectors in the 5-volt supply circuit to identify any visible damage or corrosion.
- Test the sensors and modules connected to the circuit using a multimeter to check for short circuits or excessive current draw.
- Check the ECM and power supply module for any faults or malfunctions that could be causing the low voltage condition.
- Repair or replace any damaged wiring, connectors, sensors, or modules as needed.
- Clear the diagnostic trouble codes from the vehicle's memory and perform a test drive to ensure that the issue has been resolved.
Cost to Fix B2113 Chrysler
The typical repair costs for addressing a 5-volt supply circuit low voltage issue can range from $100 to $500, depending on the extent of the damage and the parts that need to be replaced. This estimate includes the cost of parts and labor. However, it is important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It is advisable to check local rates for a more precise estimate before proceeding with the repair.
Need more information about the B2113 Chrysler code?
Need more information on how to fix the B2113 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2113 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2113 Chrysler Code
1. What does the OBDII code B2113 mean on a Chrysler vehicle?
The B2113 code indicates a problem with the 5-volt supply circuit, specifically a low voltage condition that can affect various sensors or modules.
2. What are the common symptoms of the B2113 code in a Chrysler?
Symptoms may include malfunctioning sensors, warning lights on the dashboard (e.g., ABS or traction control), and potential performance issues.
3. What causes the B2113 code to appear in a Chrysler?
Common causes include a short circuit, damaged wiring, a faulty sensor, or a malfunctioning powertrain control module (PCM) or body control module (BCM).
4. Can a faulty sensor trigger the B2113 5 Volt Supply Circuit Low code?
Yes, a faulty sensor that relies on the 5-volt reference signal can short or overload the circuit, triggering this code.
5. How do you diagnose the B2113 code in a Chrysler?
Diagnosis involves checking the wiring and connectors for the 5-volt circuit, testing related sensors, and verifying the voltage at the PCM or BCM.
6. Can driving with the B2113 code cause further damage?
Yes, ignoring this code can lead to further electrical issues and potentially compromise vehicle safety systems, depending on the affected sensors.
7. What tools are needed to troubleshoot the B2113 code?
You’ll need an OBDII scanner, a multimeter, and wiring diagrams specific to your Chrysler model.
8. Is replacing the PCM or BCM always necessary to fix the B2113 code?
No, replacing the PCM or BCM is a last resort. First, inspect and repair any wiring issues or faulty sensors that may be causing the problem.
9. How much does it cost to fix the B2113 code on a Chrysler vehicle?
Repair costs vary based on the issue. Wiring repairs may cost around $100-$300, while replacing a sensor or module could range from $200 to $1,000 or more.
10. Can a weak battery cause the B2113 code in a Chrysler?
A weak or failing battery can sometimes cause low voltage issues, but the B2113 code specifically relates to the 5-volt reference circuit. It’s still worth checking the battery and charging system during diagnosis.
Discuss the causes and fixes for B2113 Chrysler OBDII Code
Code B2113 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.