B2105 Code - Throttle Position Input Out of Range Low
Quick Answer
The B2105 diagnostic trouble code indicates that the throttle position input is out of range low. Common causes include Faulty throttle position sensor: The TPS itself may be malfunctioning and sending incorrect signals, Wiring issues: A short circuit, open circuit, or damaged wiring in the TPS circuit can cause this code, Corroded connector: Corrosion in the TPS connector can disrupt the signal. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2105 indicates Throttle Position Input Out of Range Low.
- Common causes
- Common causes include Faulty throttle position sensor: The TPS itself may be malfunctioning and sending incorrect signals, Wiring issues: A short circuit, open circuit, or damaged wiring in the TPS circuit can cause this code, Corroded connector: Corrosion in the TPS connector can disrupt the signal.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B2105 Description
The B2105 diagnostic trouble code indicates that the throttle position input is out of range low. The throttle position sensor (TPS) is a crucial component of the vehicle's electronic throttle control system. It monitors the position of the throttle valve and sends this information to the engine control module (ECM) to determine the appropriate fuel delivery and ignition timing. When the TPS signal is out of range low, it means that the voltage signal being sent by the sensor is lower than the expected range, which can lead to various performance issues.
Common Causes of B2105
- Faulty throttle position sensor: The TPS itself may be malfunctioning and sending incorrect signals.
- Wiring issues: A short circuit, open circuit, or damaged wiring in the TPS circuit can cause this code.
- Corroded connector: Corrosion in the TPS connector can disrupt the signal.
- ECM malfunction: A problem with the engine control module can also lead to this issue.
- Mechanical issues: Throttle linkage or throttle body problems can also affect the TPS signal.
Symptoms of B2105
- Rough idling: The engine may idle erratically or stall due to incorrect throttle position readings.
- Poor acceleration: The vehicle may hesitate or lack power during acceleration.
- Reduced fuel efficiency: Incorrect throttle position signals can lead to inefficient fuel delivery.
- Check Engine Light: The B2105 code will trigger the Check Engine Light on the dashboard.
- Limited throttle response: The vehicle may not respond as expected when the accelerator pedal is pressed.
How to Fix B2105
- Diagnose the issue: Use a scan tool to retrieve the trouble code and perform a thorough inspection of the TPS and related components.
- Replace the throttle position sensor: If the TPS is faulty, replace it with a new sensor following manufacturer guidelines.
- Check wiring and connectors: Inspect the wiring harness and connectors for any damage or corrosion, repairing or replacing as needed.
- Clear the trouble code: After completing the repair, clear the trouble code from the ECM memory using a scan tool.
- Test drive: Take the vehicle for a test drive to ensure that the issue has been resolved and that the TPS is functioning correctly.
Cost to Fix B2105
The cost of repairing a throttle position input out of range low issue can vary depending on the specific cause of the problem and the labor rates in your area. Typically, the cost of replacing a throttle position sensor ranges from $50 to $200, depending on the vehicle make and model. Labor costs can range from $80 to $150 per hour, and the total repair cost may be between $150 and $400. It's important to consult with a qualified mechanic to get an accurate estimate based on your vehicle's specific needs and the local labor rates.
Need more information about the B2105 code?
Need more information on how to fix the B2105 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2105 code diagnosed by a professional: Find a repair shop in your area
Code B2105 Information for Specific Makes
- B2105 Buick — Power Seat Switch Shorted
- B2105 Cadillac — Power Seat Switch Shorted
- B2105 Chevrolet — Power Seat Switch Shorted
- B2105 Chrysler — Ignition Unlock Run/Start Control Circuit High
- B2105 Dodge — Ignition Unlock Run/Start Control Circuit High
- B2105 GMC — Power Seat Switch Shorted
- B2105 Jeep — Ignition Unlock Run/Start Control Circuit High
- B2105 RAM — Ignition Unlock Run/Start Control Circuit High
Frequently Asked Questions about B2105 Code
1. What are the common symptoms of OBDII code B2105 (Throttle Position Input Out of Range Low)?
- Common symptoms include poor acceleration, rough idling, stalling, and the vehicle going into limp mode.
2. What can cause the OBDII code B2105 to trigger?
- The code may be triggered by a faulty throttle position sensor, wiring issues, or a problem with the throttle body.
3. How can I diagnose the cause of OBDII code B2105?
- You can diagnose the issue by checking the throttle position sensor for proper operation, inspecting the wiring for any damage, and performing a throttle body inspection.
4. Can a dirty throttle body cause code B2105 to appear?
- Yes, a dirty or contaminated throttle body can cause erratic readings from the throttle position sensor, triggering the B2105 code.
5. What are some repair tips for fixing OBDII code B2105?
- Repair tips include cleaning the throttle body, checking and replacing the throttle position sensor if necessary, and ensuring all wiring connections are secure.
6. Is it safe to drive with OBDII code B2105 active?
- It is not recommended to drive with the B2105 code active, as it can lead to further engine performance issues and potential safety hazards.
7. Can I reset the OBDII code B2105 without fixing the underlying issue?
- While you can clear the code with an OBDII scanner, it is important to address the underlying problem to prevent the code from reoccurring.
8. How much does it typically cost to repair OBDII code B2105?
- The cost of repair can vary depending on the cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Will OBDII code B2105 cause a decrease in fuel efficiency?
- Yes, the B2105 code can cause a decrease in fuel efficiency due to the impact on engine performance and throttle control.
10. Can I fix OBDII code B2105 myself, or do I need to take it to a mechanic?
- Depending on your mechanical skills and tools available, you may be able to fix the issue yourself by following repair guides or seek assistance from a professional mechanic for a more accurate diagnosis and repair.
Discuss the causes and fixes for B2105 OBDII Code
Code B2105 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.