B2058 Scion Code - Steering Angle Sensor
Quick Answer
The B2058 diagnostic trouble code (DTC) for Scion vehicles specifically refers to an issue with the steering angle sensor. Common causes include Faulty steering angle sensor, Wiring or connection issues with the sensor, ESC module malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2058 Scion indicates Steering Angle Sensor.
- Common causes
- Common causes include Faulty steering angle sensor, Wiring or connection issues with the sensor, ESC module malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B2058 Scion Description
The B2058 diagnostic trouble code (DTC) for Scion vehicles specifically refers to an issue with the steering angle sensor. The steering angle sensor is a crucial component of the vehicle's electronic stability control (ESC) system, as it helps determine the position of the steering wheel and the direction in which the driver intends to steer. When this sensor malfunctions or fails, it can have significant implications for the vehicle's overall performance and safety.
Common Causes of B2058 Scion
- Faulty steering angle sensor
- Wiring or connection issues with the sensor
- ESC module malfunction
- Electronic system software glitches
- Impact or damage to the sensor from a collision or rough road conditions
Symptoms of B2058 Scion
- ESC warning light illuminated on the dashboard
- Traction control system malfunction
- Steering wheel feels unresponsive or erratic
- Vehicle veers to one side unexpectedly
- Increased difficulty in maintaining control during sharp turns
How to Fix B2058 Scion
- Begin by diagnosing the specific cause of the B2058 code using a professional diagnostic tool.
- Inspect the wiring and connections related to the steering angle sensor for any signs of damage or corrosion.
- Test the sensor's functionality and calibration to determine if it needs to be replaced.
- If the sensor is faulty, replace it with a new OEM part and recalibrate it according to manufacturer specifications.
- Clear the DTC from the vehicle's memory and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix B2058 Scion
The typical repair costs for addressing a steering angle sensor issue can vary depending on the specific cause of the problem and the labor rates in your area. On average, replacing a faulty steering angle sensor can cost between $200 and $500, including parts and labor. However, additional costs may apply if other components need to be replaced or if extensive diagnostics are required. It's recommended to consult with a qualified mechanic or auto repair shop to get an accurate estimate based on your vehicle's make and model. Keep in mind that labor rates can range from $80 to $150 per hour, so it's advisable to shop around for the best rates in your area.
Need more information about the B2058 Scion code?
Need more information on how to fix the B2058 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2058 Scion code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2058 Scion Code
1. What are the common symptoms of OBDII code B2058 in a Scion related to the Steering Angle Sensor?
The common symptoms include the traction control light or ABS warning light illuminating on the dashboard, loss of stability control, and potential problems with the vehicle's steering responsiveness.
2. What are some possible causes of OBDII code B2058 in a Scion indicating an issue with the Steering Angle Sensor?
Possible causes include a faulty steering angle sensor, damaged wiring or connectors related to the sensor, or issues with the electronic control unit (ECU) receiving inaccurate data from the sensor.
3. How can I diagnose the Steering Angle Sensor issue related to OBDII code B2058 in my Scion?
Diagnosis typically involves using a professional OBDII scanner to retrieve the specific code, checking the wiring and connectors for any visible damage, and testing the sensor's output signals using a multimeter or diagnostic tool.
4. Is it safe to drive my Scion with the OBDII code B2058 related to the Steering Angle Sensor issue?
It is not recommended to drive the vehicle with this issue as it may affect the stability control system, potentially compromising the safety and handling of the vehicle.
5. Can I repair the Steering Angle Sensor problem causing OBDII code B2058 in my Scion myself?
Depending on your automotive repair skills, you may be able to replace the steering angle sensor or repair any damaged wiring yourself. However, for accurate diagnosis and complex repairs, it is advisable to seek professional help.
6. How much does it typically cost to repair the Steering Angle Sensor problem triggering OBDII code B2058 in a Scion?
The cost of repair can vary depending on the exact cause of the issue, but it may range from $200 to $500 for parts and labor if replacing the sensor or repairing the wiring.
7. Will resetting the OBDII code B2058 related to the Steering Angle Sensor issue make it go away permanently?
Resetting the code may temporarily turn off the warning lights, but if the underlying problem with the steering angle sensor persists, the code is likely to reappear after driving the vehicle for some time.
8. Can a Steering Angle Sensor calibration fix the issue causing OBDII code B2058 in my Scion?
In some cases, recalibrating the steering angle sensor after repairing or replacing it can help resolve the issue and clear the OBDII code B2058. It is recommended to perform calibration following any sensor-related repairs.
9. Are there any preventive measures to avoid encountering OBDII code B2058 due to Steering Angle Sensor problems in my Scion?
Regular maintenance checks, inspecting the sensor and related components for any signs of wear or damage, and addressing any steering-related issues promptly can help prevent the occurrence of such OBDII codes.
10. How long does it take to repair the Steering Angle Sensor issue causing OBDII code B2058 in a Scion?
The repair time can vary depending on the exact cause of the problem and the complexity of the repair. On average, it may take a few hours to a full day for a professional mechanic to diagnose and fix the Steering Angle Sensor issue.
Discuss the causes and fixes for B2058 Scion OBDII Code
Code B2058 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.