B2058 Lexus Code - Steering Angle Sensor
Quick Answer
The B2058 code for Lexus vehicles refers to an issue with the Steering Angle Sensor. Common causes include Faulty Steering Angle Sensor, Damaged wiring or connectors related to the sensor, Corrosion or contamination affecting sensor readings. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2058 Lexus indicates Steering Angle Sensor.
- Common causes
- Common causes include Faulty Steering Angle Sensor, Damaged wiring or connectors related to the sensor, Corrosion or contamination affecting sensor readings.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B2058 Lexus Description
The B2058 code for Lexus vehicles refers to an issue with the Steering Angle Sensor. The Steering Angle Sensor is a crucial component of the vehicle's stability control system, as it measures the steering angle and rate of turn. This information is used by the vehicle's electronic stability control system to determine the appropriate response to sudden changes in direction or loss of traction. When the Steering Angle Sensor malfunctions or fails, it can significantly impact the vehicle's handling and safety.
Common Causes of B2058 Lexus
- Faulty Steering Angle Sensor.
- Damaged wiring or connectors related to the sensor.
- Corrosion or contamination affecting sensor readings.
- Issues with the vehicle's electronic control unit (ECU).
- Impact or physical damage to the sensor or steering components.
Symptoms of B2058 Lexus
- Illumination of the stability control or traction control warning light on the dashboard.
- Increased difficulty in steering or inconsistent steering feel.
- Unusual noises coming from the steering column.
- Vehicle pulling to one side during driving.
- Loss of stability or traction control assistance in slippery conditions.
How to Fix B2058 Lexus
- Begin by diagnosing the specific cause of the B2058 code using a professional diagnostic scanner.
- Inspect the Steering Angle Sensor, wiring, and connectors for any visible damage or corrosion.
- Test the sensor's output using a multimeter to ensure it is providing accurate readings.
- Replace the Steering Angle Sensor if it is found to be faulty, damaged, or malfunctioning.
- Clear the diagnostic trouble codes from the vehicle's ECU and perform a test drive to verify that the issue has been resolved.
Cost to Fix B2058 Lexus
The cost of repairing a Steering Angle Sensor issue can vary depending on the specific cause of the problem and the vehicle's make and model. On average, the parts for a new Steering Angle Sensor can range from $100 to $300, while the labor costs for diagnosis and replacement can add another $100 to $200. Overall, the total repair cost for addressing a B2058 code related to the Steering Angle Sensor may fall between $200 and $500. It is important to note that labor rates at auto repair shops can vary, so it is advisable to check with local providers for a more accurate estimate.
Need more information about the B2058 Lexus code?
Need more information on how to fix the B2058 Lexus code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2058 Lexus code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2058 Lexus Code
1. What are the common symptoms of OBDII code B2058 in a Lexus related to the Steering Angle Sensor?
Symptoms may include the traction control light or stability control light illuminating on the dashboard, loss of steering assist, and potential difficulty controlling the vehicle.
2. What typically causes the OBDII code B2058 related to the Steering Angle Sensor in a Lexus?
The code B2058 often indicates a fault or malfunction in the steering angle sensor itself, wiring issues, or a problem with the sensor's calibration.
3. How can I diagnose the Steering Angle Sensor issue triggering OBDII code B2058 in my Lexus?
Diagnosis involves using an OBDII scanner to read the code, checking the sensor's wiring and connections, and performing a calibration procedure to reset the sensor.
4. Can a DIY enthusiast repair the Steering Angle Sensor problem causing OBDII code B2058 in a Lexus?
While some basic diagnosis steps can be done by a DIY enthusiast, recalibrating or replacing the steering angle sensor may require specialized tools and expertise, best left to professionals.
5. Are there any temporary fixes for the Steering Angle Sensor issue triggering OBDII code B2058 in a Lexus?
Temporary fixes like disconnecting the battery to reset the system may clear the code temporarily, but the underlying issue should still be addressed to prevent further problems.
6. How crucial is it to address the OBDII code B2058 related to the Steering Angle Sensor in a Lexus?
Ignoring the B2058 code can lead to compromised steering control, stability, and overall safety of the vehicle, so it is crucial to address the issue promptly.
7. Can a malfunctioning Steering Angle Sensor triggering OBDII code B2058 affect other vehicle systems in a Lexus?
Yes, a faulty steering angle sensor can impact other safety systems like traction control, stability control, and potentially even the vehicle's braking system.
8. How much does it typically cost to repair the Steering Angle Sensor issue causing OBDII code B2058 in a Lexus?
Costs can vary depending on the exact cause of the issue, but repairs involving sensor calibration or replacement can range from a few hundred to over a thousand dollars, including parts and labor.
9. Is it safe to continue driving my Lexus with the OBDII code B2058 related to the Steering Angle Sensor illuminated?
It is not recommended to drive the vehicle with the B2058 code active, as it can lead to unpredictable steering behavior and compromised safety on the road.
10. Can a Lexus dealership or an independent mechanic handle the repair of the Steering Angle Sensor issue triggering OBDII code B2058?
Both a Lexus dealership and qualified independent mechanics with experience in handling steering and sensor issues can address and resolve the B2058 code related to the Steering Angle Sensor.
Discuss the causes and fixes for B2058 Lexus OBDII Code
Code B2058 Lexus comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.