B2047 Mercury Code - Right Rear Stop Lamp Circuit Open
Quick Answer
The B2047 code for Mercury vehicles indicates that there is an open circuit in the right rear stop lamp circuit. Common causes include Damaged or corroded wiring harness, Faulty stop lamp bulb, Malfunctioning stop lamp switch. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2047 Mercury indicates Right Rear Stop Lamp Circuit Open.
- Common causes
- Common causes include Damaged or corroded wiring harness, Faulty stop lamp bulb, Malfunctioning stop lamp switch.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B2047 Mercury Description
The B2047 code for Mercury vehicles indicates that there is an open circuit in the right rear stop lamp circuit. This means that the electrical connection to the right rear stop lamp is interrupted, preventing it from functioning properly. The stop lamp is a crucial safety feature that alerts other drivers when you are braking, so it is important to address this issue promptly.
Common Causes of B2047 Mercury
- Damaged or corroded wiring harness
- Faulty stop lamp bulb
- Malfunctioning stop lamp switch
- Problem with the vehicle's body control module
Symptoms of B2047 Mercury
- Check engine light illuminated on the dashboard
- Right rear stop lamp not illuminating when braking
- Vehicle failing state inspection due to faulty stop lamp
- Potential increased risk of rear-end collisions
How to Fix B2047 Mercury
- Begin by visually inspecting the wiring harness connected to the right rear stop lamp for any signs of damage or corrosion.
- Check the stop lamp bulb to ensure it is not burnt out and replace it if necessary.
- Test the stop lamp switch to determine if it is functioning correctly, replacing it if needed.
- If the issue persists, have the vehicle's body control module diagnosed and repaired by a professional technician.
Cost to Fix B2047 Mercury
The cost of repairing the right rear stop lamp circuit open issue can vary depending on the specific cause of the problem and the labor rates in your area. On average, you can expect to pay between $100 to $300 for parts and labor. However, it is important to note that diagnostic time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more precise estimate.
Need more information about the B2047 Mercury code?
Need more information on how to fix the B2047 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2047 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2047 Mercury Code
1. What does the OBDII code B2047 mean on a Mercury?
The B2047 code indicates an open circuit in the right rear stop lamp, meaning the vehicle's system has detected a problem with the wiring or bulb for that lamp.
2. What are the symptoms of the B2047 code on a Mercury?
Common symptoms include the right rear brake light not working, a warning light on the dashboard, and possibly a "Check Lamp" message.
3. What causes the B2047 code to appear?
Possible causes include a burned-out brake light bulb, damaged wiring, a corroded connector, or a faulty stop lamp socket.
4. Can I still drive my Mercury with the B2047 code active?
While the vehicle may still be drivable, it is unsafe to drive without a functioning right rear brake light, as it reduces visibility to other drivers and could lead to a traffic violation.
5. How do I diagnose the B2047 code on my Mercury?
Start by checking the right rear stop lamp bulb for damage, inspect the wiring and connectors for corrosion or breaks, and use a multimeter to test for continuity in the circuit.
6. How do I fix the B2047 code on a Mercury?
Fixes may include replacing the stop lamp bulb, repairing or replacing damaged wiring, cleaning corroded connectors, or replacing a faulty lamp socket.
7. Can a blown fuse cause the B2047 code?
While the code specifically relates to the right rear stop lamp circuit, a blown fuse could potentially affect the circuit and should be checked during diagnosis.
8. How much does it cost to repair the B2047 code on a Mercury?
The cost depends on the issue, but replacing a bulb may cost $20 or less, while repairing wiring or a socket could range from $50 to $150.
9. Will clearing the B2047 code fix the problem permanently?
No, clearing the code will not fix the underlying issue. The problem with the right rear stop lamp circuit must be repaired to prevent the code from returning.
10. Can a faulty brake light switch cause the B2047 code?
While it is unlikely, a faulty brake light switch could potentially cause issues with the stop lamp circuit and should be tested if other components appear functional.
Discuss the causes and fixes for B2047 Mercury OBDII Code
Code B2047 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.