Engine-Codes.com
Engine-Codes – Generic – B2005

B2005 Code - Short To Positive In Seat Belt Motor Left Circuit

Quick Answer

The B2005 diagnostic trouble code indicates a short to positive in the seat belt motor left circuit. Common causes include Frayed or damaged wiring in the seat belt motor left circuit, Corrosion or loose connections in the electrical system, Faulty seat belt motor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2005 indicates Short To Positive In Seat Belt Motor Left Circuit.
Common causes
Common causes include Frayed or damaged wiring in the seat belt motor left circuit, Corrosion or loose connections in the electrical system, Faulty seat belt motor.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B2005 Description

The B2005 diagnostic trouble code indicates a short to positive in the seat belt motor left circuit. This means that there is an electrical issue in the circuit that controls the seat belt motor on the left side of the vehicle. The seat belt motor is responsible for retracting and releasing the seat belt, ensuring that it functions properly to keep occupants safe in the event of a collision.

OBDII Code B2005 - Short To Positive In Seat Belt Motor Left Circuit
B2005 Code - Short To Positive In Seat Belt Motor Left Circuit

Common Causes of B2005

  1. Frayed or damaged wiring in the seat belt motor left circuit.
  2. Corrosion or loose connections in the electrical system.
  3. Faulty seat belt motor.
  4. Short circuit due to water damage or exposure to moisture.
  5. Electrical issues in the vehicle's wiring harness.

Symptoms of B2005

  1. Seat belt on the left side not retracting properly.
  2. Seat belt becoming stuck or jammed.
  3. Seat belt not securing the occupant in place.
  4. Seat belt warning light on the dashboard illuminated.
  5. Audible warning chime when seat belt is not buckled.

How to Fix B2005

  1. Begin by diagnosing the specific location of the short circuit in the seat belt motor left circuit.
  2. Inspect the wiring and connections for any signs of damage, corrosion, or loose connections.
  3. Repair or replace any damaged wiring or connections in the circuit.
  4. Test the seat belt motor to ensure it is functioning properly.
  5. Clear the diagnostic trouble code and test the seat belt system to verify that the issue has been resolved.

Cost to Fix B2005

The typical repair costs for addressing a short to positive in the seat belt motor left circuit can vary depending on the extent of the damage and the specific repairs needed. On average, the cost for parts and labor for this repair could range from $150 to $300. However, it's important to note that these costs can vary based on factors such as location, vehicle make and model, and the rates of the auto repair shop. It's advisable to consult with a professional technician to get an accurate estimate for this repair.

Need more information about the B2005 code?

Need more information on how to fix the B2005 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2005 code diagnosed by a professional: Find a repair shop in your area

Code B2005 Information for Specific Makes

  • B2005 Acura — Left Power Sliding Door Control Unit Lost Communication With MICU
  • B2005 Honda — Left Power Sliding Door Control Unit Lost Communication With MICU
  • B2005 Lexus — Short To Positive In Seat Belt Motor Left Circuit
  • B2005 Scion — Short To Positive In Seat Belt Motor Left Circuit
  • B2005 Toyota — Short To Positive In Seat Belt Motor Left Circuit

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2005 Code

1. What does OBDII code B2005 mean?

Code B2005 indicates a short to positive in the seat belt motor left circuit, meaning there is an electrical issue causing improper operation of the left seat belt motor.

2. What are the symptoms of code B2005?

Common symptoms include the left seat belt motor not functioning properly, warning lights on the dashboard, or failure of the seat belt system to engage or retract.

3. What causes the B2005 code to appear?

The code can be caused by damaged wiring, a short circuit to power in the seat belt motor circuit, a faulty seat belt motor, or a malfunctioning control module.

4. How can I diagnose a B2005 code?

Start by visually inspecting the wiring and connectors for damage, test the seat belt motor for proper operation, and use a multimeter to check for a short to power in the circuit.

5. Can I still drive my vehicle with a B2005 code?

While the vehicle may still be drivable, the seat belt system may not function correctly, posing a safety risk. It’s important to address the issue promptly.

6. How do I fix the B2005 code?

Repairs may include repairing or replacing damaged wiring, replacing the seat belt motor if it’s faulty, or addressing issues with the control module.

7. What tools are needed to fix a B2005 code?

You may need a multimeter, a scan tool to clear the code, and basic tools to access and repair wiring or replace components.

8. How much does it cost to fix the B2005 code?

The cost depends on the root cause. Wiring repairs may cost less than $100, while replacing a seat belt motor or control module can cost $200–$500 or more, including labor.

9. Can I fix the B2005 code myself?

If you’re comfortable with electrical diagnostics and repairs, you may be able to fix the issue. Otherwise, it’s best to consult a professional mechanic.

10. Will clearing the code with a scan tool fix the problem?

Clearing the code will not fix the underlying issue. The problem must be diagnosed and repaired to prevent the code from returning.

Discuss the causes and fixes for B2005 OBDII Code

Submit a New Comment

Code B2005 comments

No comments found for this page.