B1E49 Jeep Code - 3rd Row Seat Right Backrest Position Sensor Circuit Low
Quick Answer
The B1E49 code for a Jeep indicates a problem with the 3rd Row Seat Right Backrest Position Sensor Circuit being too low. Common causes include Faulty 3rd Row Seat Right Backrest Position Sensor, Damaged wiring or connectors related to the sensor circuit, Sensor calibration out of range. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1E49 Jeep indicates 3rd Row Seat Right Backrest Position Sensor Circuit Low.
- Common causes
- Common causes include Faulty 3rd Row Seat Right Backrest Position Sensor, Damaged wiring or connectors related to the sensor circuit, Sensor calibration out of range.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1E49 Jeep Description
The B1E49 code for a Jeep indicates a problem with the 3rd Row Seat Right Backrest Position Sensor Circuit being too low. This sensor is responsible for monitoring the position of the right backrest in the third row of seats. When the sensor detects that the backrest is in a lower position than it should be, it triggers the B1E49 diagnostic trouble code (DTC). This issue can affect the vehicle's performance by potentially causing the airbag system to malfunction or not deploy properly in the event of a crash. It is important to address this code promptly to ensure the safety of occupants in the vehicle.
Common Causes of B1E49 Jeep
- Faulty 3rd Row Seat Right Backrest Position Sensor.
- Damaged wiring or connectors related to the sensor circuit.
- Sensor calibration out of range.
- Electronic control unit (ECU) software issue.
- Physical obstruction preventing the backrest from moving correctly.
Symptoms of B1E49 Jeep
- Airbag warning light illuminated on the dashboard.
- Inconsistent or erratic behavior of the airbag system.
- Third-row right backrest not adjusting properly.
- System error message displayed on the vehicle's information screen.
How to Fix B1E49 Jeep
- Begin by diagnosing the specific cause of the issue using a diagnostic scanner to read the codes and pinpoint the problem area.
- Inspect the wiring and connectors associated with the 3rd Row Seat Right Backrest Position Sensor for any damage or loose connections.
- Test the sensor itself for proper functionality and calibration, replacing it if necessary.
- Clear the DTC from the ECU memory after the repair is completed.
- Perform a system reset or calibration procedure to ensure proper operation of the sensor and backrest positioning.
Cost to Fix B1E49 Jeep
The typical repair costs for addressing the B1E49 code in a Jeep can vary depending on the specific cause of the issue. In general, replacing a faulty sensor or repairing damaged wiring may cost between $150 to $300, including parts and labor. However, additional diagnostics or calibration procedures may increase the overall cost. It is recommended to consult with a qualified mechanic or dealership to get an accurate estimate based on the vehicle's make and model, as well as the local labor rates.
Need more information about the B1E49 Jeep code?
Need more information on how to fix the B1E49 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1E49 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1E49 Jeep Code
1. What does the OBDII code B1E49 mean for a Jeep?
B1E49 indicates an issue with the 3rd Row Seat Right Backrest Position Sensor Circuit, specifically that the circuit is reading a low voltage condition.
2. What are the common symptoms of code B1E49 in a Jeep?
Symptoms may include the inability to adjust the 3rd-row seat backrest, malfunctioning seat position memory, or an illuminated warning light on the dashboard.
3. What causes the B1E49 code to appear?
The code can be triggered by a faulty position sensor, damaged wiring or connectors, or issues with the seat control module.
4. Can I continue driving my Jeep with a B1E49 code?
Yes, you can continue driving; however, the functionality of the 3rd-row seat backrest may be compromised until the issue is repaired.
5. How do I diagnose the B1E49 code in a Jeep?
Start by inspecting the wiring and connectors for damage or corrosion, then test the 3rd Row Seat Right Backrest Position Sensor for proper operation using a multimeter.
6. How can I fix the B1E49 code in my Jeep?
Repairs may include replacing the faulty position sensor, repairing or replacing damaged wiring, or resetting the seat control module if necessary.
7. How much does it cost to fix the B1E49 code?
The repair cost depends on the specific issue, with sensor replacements typically ranging from $50 to $200, plus labor if done by a professional.
8. Can a blown fuse cause the B1E49 code?
Yes, a blown fuse related to the seat control system can cause electrical issues that trigger this code.
9. Do I need to replace the seat control module to fix the B1E49 code?
Not always; the seat control module should only be replaced if it’s confirmed to be faulty after other components have been inspected and tested.
10. Will clearing the B1E49 code with a scan tool fix the problem?
Clearing the code may turn off the warning temporarily, but the underlying issue must be repaired to prevent the code from returning.
Discuss the causes and fixes for B1E49 Jeep OBDII Code
Code B1E49 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.