B1E28 Chrysler Code - 3rd Row Seat Normal/Stow Switch Circuit Low
Quick Answer
The B1E28 Chrysler diagnostic trouble code (DTC) specifically refers to the 3rd Row Seat Normal/Stow Switch Circuit Low. Common causes include Faulty 3rd row seat normal/stow switch, Wiring issues such as a short circuit or open circuit, Malfunctioning seat control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1E28 Chrysler indicates 3rd Row Seat Normal/Stow Switch Circuit Low.
- Common causes
- Common causes include Faulty 3rd row seat normal/stow switch, Wiring issues such as a short circuit or open circuit, Malfunctioning seat control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1E28 Chrysler Description
The B1E28 Chrysler diagnostic trouble code (DTC) specifically refers to the 3rd Row Seat Normal/Stow Switch Circuit Low. This code indicates that there is a low voltage condition detected in the circuit related to the 3rd row seat normal/stow switch. In vehicles equipped with a 3rd row seat that can be stowed away for additional cargo space, this switch is crucial for controlling the seat's movement. When the switch circuit is reading low voltage, it can prevent the seat from functioning properly, leading to potential safety concerns and inconvenience for passengers.
Common Causes of B1E28 Chrysler
- Faulty 3rd row seat normal/stow switch.
- Wiring issues such as a short circuit or open circuit.
- Malfunctioning seat control module.
- Power supply issues affecting the circuit.
- Corrosion or damage to electrical connectors related to the switch circuit.
Symptoms of B1E28 Chrysler
- Inability to stow or adjust the 3rd row seat.
- Warning light illuminated on the dashboard related to the seat system.
- Unusual noises or movements when attempting to operate the 3rd row seat.
- Intermittent functioning of the seat control switch.
How to Fix B1E28 Chrysler
- Begin by conducting a thorough visual inspection of the wiring harness, connectors, and switch for any visible damage or corrosion.
- Use a multimeter to test the voltage at the switch circuit to determine if it is reading low voltage.
- If the voltage is indeed low, replace the 3rd row seat normal/stow switch with a new, OEM-approved part.
- Clear the DTC from the vehicle's memory using a diagnostic scan tool.
- Test the functionality of the 3rd row seat to ensure that the switch circuit is now operating correctly.
Cost to Fix B1E28 Chrysler
The typical repair costs for addressing the B1E28 Chrysler code can vary depending on the specific cause of the issue and the labor rates at the auto repair shop. In general, replacing the 3rd row seat normal/stow switch can cost between $100 to $300, including parts and labor. However, additional costs may be incurred if other components such as the seat control module need to be replaced. It is advisable to consult with a trusted mechanic or dealership to get an accurate estimate based on the vehicle's make and model, as well as the extent of the repair needed. Keep in mind that diagnostic time and labor rates can vary, so it's recommended to inquire about these factors before proceeding with the repair.
Need more information about the B1E28 Chrysler code?
Need more information on how to fix the B1E28 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1E28 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1E28 Chrysler Code
1. What does the OBDII code B1E28 mean on a Chrysler vehicle?
The code B1E28 indicates a low voltage issue in the 3rd Row Seat Normal/Stow Switch Circuit.
2. What are the common symptoms of code B1E28?
Symptoms include the 3rd-row seat failing to move between normal and stow positions, or the switch being unresponsive.
3. What causes the B1E28 code to appear?
The most common causes include a faulty Normal/Stow switch, damaged wiring, poor electrical connections, or a blown fuse.
4. Can I still drive my Chrysler with the B1E28 code?
Yes, you can drive the vehicle, but the 3rd-row seat functionality will be impaired until the issue is resolved.
5. How do you diagnose the B1E28 code?
Diagnosis involves inspecting the switch, checking the wiring and connections for damage or corrosion, and testing the circuit for proper voltage.
6. How can I fix the B1E28 code?
Repairs may include replacing the switch, repairing damaged wiring, securing loose connections, or replacing a blown fuse.
7. Is the B1E28 code likely to damage other components?
No, this code specifically affects the 3rd Row Seat Normal/Stow Switch Circuit and typically doesn’t impact other systems.
8. What tools are needed to troubleshoot the B1E28 code?
A multimeter and an OBDII scanner are essential for diagnosing the circuit and identifying the root cause.
9. Can a software update fix the B1E28 code?
A software update is unlikely to fix this issue, as it is typically caused by a hardware-related problem in the switch or circuit.
10. How much does it typically cost to repair the B1E28 code?
Repair costs vary but may range from $50 to $200, depending on whether the switch, wiring, or other components need replacement.
Discuss the causes and fixes for B1E28 Chrysler OBDII Code
Code B1E28 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.