Engine-Codes.com
Engine-Codes – Generic – B1CC1

B1CC1 Code - Deployment Notification Output Circuit Low

Quick Answer

The B1CC1 diagnostic trouble code (DTC) refers to the Deployment Notification Output Circuit Low. Common causes include Damaged wiring or connectors in the deployment notification circuit, Loose connections or poor electrical contact in the system, A faulty deployment notification sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1CC1 indicates Deployment Notification Output Circuit Low.
Common causes
Common causes include Damaged wiring or connectors in the deployment notification circuit, Loose connections or poor electrical contact in the system, A faulty deployment notification sensor.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 24, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B1CC1 Description

The B1CC1 diagnostic trouble code (DTC) refers to the Deployment Notification Output Circuit Low. This code indicates a problem with the deployment notification system in the vehicle, specifically related to a circuit that is registering a low voltage or resistance. The deployment notification system is a crucial component of the vehicle's safety system, responsible for alerting the driver and passengers in the event of an airbag deployment or other safety-related incidents.

OBDII Code B1CC1 - Deployment Notification Output Circuit Low
B1CC1 Code - Deployment Notification Output Circuit Low

Common Causes of B1CC1

  1. Damaged wiring or connectors in the deployment notification circuit.
  2. Loose connections or poor electrical contact in the system.
  3. A faulty deployment notification sensor.
  4. Malfunctioning airbag control module.
  5. Corrosion or water damage affecting the components of the system.

Symptoms of B1CC1

  1. Illumination of the airbag warning light on the dashboard.
  2. Inability to reset the airbag warning light after clearing the code.
  3. Erratic behavior of the airbag system, such as random deployment or failure to deploy.
  4. Loss of communication with the airbag control module.
  5. Diagnostic trouble codes related to other airbag or safety systems.

How to Fix B1CC1

  1. Begin by conducting a thorough visual inspection of the wiring and connectors in the deployment notification circuit. Look for any signs of damage, corrosion, or loose connections.
  2. Use a multimeter to test the voltage and resistance in the circuit to pinpoint the exact location of the issue.
  3. Check the deployment notification sensor for proper functionality and replace it if necessary.
  4. Inspect the airbag control module for any faults or malfunctions and replace it if needed.
  5. Clear the DTC from the vehicle's memory using a diagnostic scan tool and perform a test drive to ensure the issue has been resolved.

Cost to Fix B1CC1

The typical repair costs for addressing a Deployment Notification Output Circuit Low code can vary depending on the specific cause of the issue and the extent of the repairs needed. On average, the parts and labor for this repair could range from $200 to $500. However, it's important to note that prices can fluctuate based on factors such as the vehicle make and model, the location of the repair shop, and the hourly labor rates. It's recommended to consult with a certified mechanic or auto repair shop for a more accurate cost estimate tailored to your vehicle's needs.

Need more information about the B1CC1 code?

Need more information on how to fix the B1CC1 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1CC1 code diagnosed by a professional: Find a repair shop in your area

Code B1CC1 Information for Specific Makes

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1CC1 Code

1. What does OBDII code B1CC1 mean?

Code B1CC1 indicates a "Deployment Notification Output Circuit Low," which means there’s a problem with the circuit responsible for sending airbag deployment signals to the notification system.

2. What are the common symptoms of code B1CC1?

Common symptoms include the airbag warning light staying on, a stored trouble code in the vehicle's computer, and possible malfunction of the airbag notification system.

3. What causes the B1CC1 code?

The code can be caused by a shorted or open circuit in the deployment notification wiring, a damaged connector, a faulty airbag control module, or poor electrical connections.

4. Is it safe to drive with a B1CC1 code?

It’s not recommended to drive with this code active, as it may indicate an issue with the airbag system, potentially compromising passenger safety during a collision.

5. How is the B1CC1 code diagnosed?

A technician will use an OBDII scanner to retrieve the code, inspect the deployment notification circuit for damage or loose connections, and test the airbag control module if necessary.

6. Can I fix the B1CC1 code myself?

Repairing this code typically requires specialized tools and knowledge of airbag systems. DIY repairs are not recommended due to the risk of accidental airbag deployment.

7. How much does it cost to repair a B1CC1 code?

Repair costs vary depending on the issue, but can range from $100 for fixing wiring issues to over $500 if the airbag control module needs replacement.

8. Can a dead battery cause the B1CC1 code?

Yes, a low or dead battery can sometimes trigger this code, as insufficient voltage may affect the airbag system’s circuits.

9. Will clearing the B1CC1 code fix the problem?

Clearing the code will not fix the underlying issue. The root cause, such as a damaged circuit or faulty module, must be addressed to prevent the code from returning.

10. What tools are needed to repair a B1CC1 code?

Diagnosing and repairing this code often requires an OBDII scanner, a multimeter to test electrical connections, and access to the vehicle’s wiring diagram for troubleshooting.

Discuss the causes and fixes for B1CC1 OBDII Code

Submit a New Comment

Code B1CC1 comments

No comments found for this page.