Engine-Codes.com
Engine-Codes – RAM – B1C2C RAM

B1C2C RAM Code - Right Side Seat Thorax Squib 1 High

Quick Answer

The B1C2C RAM code indicates a problem with the right side seat thorax squib 1 in the vehicle. Common causes include Faulty wiring connections, Damaged seat thorax squib, Malfunctioning airbag control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1C2C RAM indicates Right Side Seat Thorax Squib 1 High.
Common causes
Common causes include Faulty wiring connections, Damaged seat thorax squib, Malfunctioning airbag control module.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 16, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B1C2C RAM Description

The B1C2C RAM code indicates a problem with the right side seat thorax squib 1 in the vehicle. The seat thorax squib is a component of the airbag system that is responsible for deploying the side airbag in the event of a collision. When this code is triggered, it means that there is a high resistance or open circuit detected in the right side seat thorax squib 1 circuit.

OBDII Code B1C2C RAM - Right Side Seat Thorax Squib 1 High
B1C2C RAM Code - Right Side Seat Thorax Squib 1 High

Common Causes of B1C2C RAM

  1. Faulty wiring connections
  2. Damaged seat thorax squib
  3. Malfunctioning airbag control module
  4. Corrosion in the electrical connectors
  5. Impact or damage to the seat causing a disruption in the circuit

Symptoms of B1C2C RAM

  1. Airbag warning light illuminated on the dashboard
  2. Inability to turn off the airbag warning light
  3. Diagnostic trouble code (DTC) stored in the vehicle's computer
  4. Non-deployment of the side airbag during a collision

How to Fix B1C2C RAM

  1. Begin by disconnecting the vehicle's battery to prevent accidental deployment of the airbag system.
  2. Inspect the wiring connections and electrical connectors for any signs of damage or corrosion. Repair or replace as necessary.
  3. Test the seat thorax squib using a multimeter to check for proper resistance. Replace if the resistance is out of specification.
  4. Clear the diagnostic trouble codes from the vehicle's computer using a scan tool.
  5. Reconnect the battery and test the airbag system to ensure proper functionality.

Cost to Fix B1C2C RAM

The typical repair costs for addressing a B1C2C RAM code related to the right side seat thorax squib 1 can vary depending on the specific cause of the issue. In general, the cost of parts for a new seat thorax squib can range from $200 to $500, while labor costs can range from $100 to $300. Additional costs may be incurred if wiring repairs or replacements are necessary. It's important to note that diagnostic time and labor rates at auto repair shops can vary, so it's recommended to obtain quotes from local shops for a more accurate estimate.

When is the Code Detected?

This Diagnostic Trouble Code (DTC) sets when the Occupant Restraint Controller (ORC) detects a short to voltage on the squib circuit for more than 2.5 seconds. This DTC transitions from active to stored when the module sees a recovery from a short to voltage for greater than 2.5 seconds.

Need more information about the B1C2C RAM code?

Need more information on how to fix the B1C2C RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1C2C RAM code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1C2C RAM Code

1. What are the common symptoms of OBDII code B1C2C RAM related to the Right Side Seat Thorax Squib 1 High?

- Common symptoms may include the airbag warning light illuminating on the dashboard and potential issues with the right side seat airbag system.

2. What are the possible causes of OBDII code B1C2C RAM indicating Right Side Seat Thorax Squib 1 High?

- Possible causes include a faulty seat airbag squib, wiring issues, a disconnected connector, or a problem with the airbag control module.

3. How can I diagnose the OBDII code B1C2C RAM associated with the Right Side Seat Thorax Squib 1 High?

- A thorough inspection of the right side seat airbag system, including checking for damaged wiring, loose connections, and testing the seat squib with a multimeter, can help diagnose the issue.

4. Is it safe to drive with the OBDII code B1C2C RAM indicating Right Side Seat Thorax Squib 1 High?

- It is not recommended to drive the vehicle with an active airbag fault code, as it may compromise the effectiveness of the airbag system in the event of a collision.

5. What are some repair tips for addressing OBDII code B1C2C RAM related to the Right Side Seat Thorax Squib 1 High?

- Repair tips may include repairing or replacing damaged wiring, ensuring all connectors are securely attached, and replacing the faulty seat airbag squib if necessary.

6. Can I reset the OBDII code B1C2C RAM associated with the Right Side Seat Thorax Squib 1 High on my own?

- While you can clear the code with an OBDII scanner, it is important to address the underlying issue causing the fault code to prevent it from recurring.

7. How much does it typically cost to repair OBDII code B1C2C RAM related to the Right Side Seat Thorax Squib 1 High?

- The cost of repair can vary depending on the specific cause of the issue, but it may involve expenses for parts, labor, and diagnostic services at a repair shop or dealership.

8. Are there any safety precautions to consider when working on the right side seat airbag system for OBDII code B1C2C RAM?

- It is crucial to disconnect the vehicle's battery and wait for the airbag system to fully discharge before attempting any repairs to avoid accidental deployment and potential injuries.

9. Can a DIY enthusiast with automotive experience fix OBDII code B1C2C RAM associated with the Right Side Seat Thorax Squib 1 High?

- While some tasks, such as checking connections or replacing components, may be within reach for experienced individuals, diagnosing and repairing airbag system issues often require specialized knowledge and tools.

10. How often should I have the right side seat airbag system inspected to prevent OBDII code B1C2C RAM occurrences?

- Regular maintenance and inspections, especially after any accidents or electrical work, can help identify potential issues early and prevent faults like B1C2C RAM related to the Right Side Seat Thorax Squib 1 High.

Discuss the causes and fixes for B1C2C RAM OBDII Code

Submit a New Comment

Code B1C2C RAM comments

No comments found for this page.