Engine-Codes.com
Engine-Codes – Chrysler – B1C2C Chrysler

B1C2C Chrysler Code - Right Side Seat Thorax Squib 1 High

Quick Answer

The B1C2C Chrysler code indicates a problem with the right side seat thorax squib 1, which is part of the vehicle's airbag system. Common causes include Faulty right side seat thorax squib 1, Damaged wiring or connectors in the circuit, Loose connection at the squib or airbag control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1C2C Chrysler indicates Right Side Seat Thorax Squib 1 High.
Common causes
Common causes include Faulty right side seat thorax squib 1, Damaged wiring or connectors in the circuit, Loose connection at the squib or airbag control module.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 16, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B1C2C Chrysler Description

The B1C2C Chrysler code indicates a problem with the right side seat thorax squib 1, which is part of the vehicle's airbag system. The seat thorax squib is a component that is responsible for deploying the side airbag in the event of a side impact collision. When this code is triggered, it means that there is a high resistance or open circuit detected in the right side seat thorax squib 1 circuit.

OBDII Code B1C2C Chrysler - Right Side Seat Thorax Squib 1 High
B1C2C Chrysler Code - Right Side Seat Thorax Squib 1 High

Common Causes of B1C2C Chrysler

  1. Faulty right side seat thorax squib 1
  2. Damaged wiring or connectors in the circuit
  3. Loose connection at the squib or airbag control module
  4. Malfunctioning airbag control module
  5. Corrosion or water damage in the circuit

Symptoms of B1C2C Chrysler

  1. Airbag warning light illuminated on the dashboard
  2. Diagnostic trouble code (DTC) B1C2C stored in the vehicle's computer
  3. Side airbag system may not deploy in a side impact collision
  4. Loss of power to the right side seat thorax squib 1

How to Fix B1C2C Chrysler

  1. Begin by disconnecting the vehicle's battery to prevent accidental deployment of the airbag system.
  2. Locate the right side seat thorax squib 1 within the seat and inspect the wiring and connectors for any damage or corrosion.
  3. Test the resistance of the squib using a multimeter to determine if it is faulty.
  4. If the squib is found to be faulty, replace it with a new one following the manufacturer's instructions.
  5. Clear the diagnostic trouble code (DTC) from the vehicle's computer and reconnect the battery to test the system.

Cost to Fix B1C2C Chrysler

The typical repair costs for addressing a B1C2C Chrysler code related to the right side seat thorax squib 1 can vary depending on the specific cause of the issue. In general, replacing a faulty squib and addressing any wiring or connector issues can range from $200 to $500, including parts and labor. However, it's important to note that the actual cost may be higher or lower based on the vehicle's make and model, the location of the repair, and the rates charged by the auto repair shop. It's recommended to obtain quotes from multiple shops to compare prices and ensure a competitive rate.

When is the Code Detected?

This Diagnostic Trouble Code (DTC) sets when the Occupant Restraint Controller (ORC) detects a short to voltage on the squib circuit for more than 2.5 seconds. This DTC transitions from active to stored when the module sees a recovery from a short to voltage for greater than 2.5 seconds.

Need more information about the B1C2C Chrysler code?

Need more information on how to fix the B1C2C Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1C2C Chrysler code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1C2C Chrysler Code

1. What are common symptoms of OBDII code B1C2C Chrysler (Right Side Seat Thorax Squib 1 High)?

- Common symptoms include the airbag warning light illuminating on the dashboard and a potential loss of functionality in the right side seat thorax airbag.

2. What could cause OBDII code B1C2C Chrysler to trigger?

- This code is typically triggered by a high resistance or an open circuit in the right side seat thorax squib 1 circuit.

3. How serious is OBDII code B1C2C Chrysler?

- This code indicates an issue with the right side seat thorax airbag system, which can affect the proper deployment of the airbag during a collision. It is important to address this issue promptly for safety reasons.

4. Can I still drive my vehicle with OBDII code B1C2C Chrysler present?

- It is not recommended to drive the vehicle with this code present, as it may compromise the effectiveness of the right side seat thorax airbag in the event of a collision.

5. How can I diagnose and repair OBDII code B1C2C Chrysler?

- Diagnosis typically involves checking the wiring and connections related to the right side seat thorax squib 1 circuit. Repair may involve repairing or replacing damaged wiring, connectors, or the squib itself.

6. Is it possible to reset OBDII code B1C2C Chrysler without fixing the underlying issue?

- While you can clear the code using an OBDII scanner, it is not recommended to do so without addressing the root cause, as it may pose a safety risk in the event of an accident.

7. Are there any common mistakes to avoid when dealing with OBDII code B1C2C Chrysler?

- One common mistake is neglecting to check the wiring and connectors thoroughly, as issues in these areas are often the cause of the problem.

8. Can I fix OBDII code B1C2C Chrysler myself, or do I need a professional mechanic?

- Depending on your skill level and access to tools, you may be able to address this issue yourself by following repair guides or seeking assistance from a professional mechanic for a more thorough diagnosis and repair.

9. How much does it typically cost to repair OBDII code B1C2C Chrysler?

- The cost of repair can vary depending on the extent of the issue and whether you choose to address it yourself or seek professional help. It may involve expenses for parts and labor.

10. Is there a way to prevent OBDII code B1C2C Chrysler from occurring in the future?

- Regular maintenance and inspection of the airbag system, including checking wiring and connectors, can help prevent issues that may lead to this code triggering.

Discuss the causes and fixes for B1C2C Chrysler OBDII Code

Submit a New Comment

Code B1C2C Chrysler comments

No comments found for this page.