Engine-Codes.com
Engine-Codes – Jeep – B1C28 Jeep

B1C28 Jeep Code - Left Side Seat Thorax Squib 1 High

Quick Answer

The B1C28 diagnostic code for Jeep vehicles specifically refers to an issue with the Left Side Seat Thorax Squib 1 being detected as high. Common causes include Faulty wiring or connectors in the airbag system, Defective Left Side Seat Thorax Squib 1 component, Issues with the airbag control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1C28 Jeep indicates Left Side Seat Thorax Squib 1 High.
Common causes
Common causes include Faulty wiring or connectors in the airbag system, Defective Left Side Seat Thorax Squib 1 component, Issues with the airbag control module.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 11, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B1C28 Jeep Description

The B1C28 diagnostic code for Jeep vehicles specifically refers to an issue with the Left Side Seat Thorax Squib 1 being detected as high. In simpler terms, this code indicates that there is a problem with the driver's side seat airbag system. The term "Squib" refers to the electrical component responsible for deploying the airbag in case of a collision. When this component is deemed "high," it typically means that there is an abnormal resistance or voltage reading in the system.

OBDII Code B1C28 Jeep - Left Side Seat Thorax Squib 1 High
B1C28 Jeep Code - Left Side Seat Thorax Squib 1 High

Common Causes of B1C28 Jeep

  1. Faulty wiring or connectors in the airbag system
  2. Defective Left Side Seat Thorax Squib 1 component
  3. Issues with the airbag control module
  4. Water or moisture damage affecting the airbag system
  5. Impact or collision damaging the airbag system

Symptoms of B1C28 Jeep

  1. Illuminated airbag warning light on the dashboard
  2. Inability to turn off the airbag warning light
  3. Warning message indicating an airbag system issue
  4. Failure of the airbag to deploy during a collision

How to Fix B1C28 Jeep

  1. Begin by conducting a thorough diagnostic scan to confirm the B1C28 code and identify the specific issue within the airbag system.
  2. Inspect the wiring and connectors in the airbag system for any signs of damage or corrosion. Repair or replace any faulty components as needed.
  3. Test the Left Side Seat Thorax Squib 1 component to determine if it is functioning properly. Replace the squib if it is found to be defective.
  4. Check the airbag control module for any faults or malfunctions. Reset or replace the module as necessary.
  5. Clear the diagnostic trouble codes, reset the airbag system, and conduct a final test to ensure that the issue has been resolved and the airbag system is functioning correctly.

Cost to Fix B1C28 Jeep

The cost of repairing the B1C28 code for the Left Side Seat Thorax Squib 1 in a Jeep vehicle can vary depending on the specific issue and the extent of the repairs needed. On average, the cost of parts for this repair can range from $200 to $500, with labor costs adding an additional $100 to $300. Overall, drivers can expect to pay anywhere from $300 to $800 for this repair at an auto repair shop. It's important to note that these are rough estimates, and actual costs may vary based on the location of the repair shop, the make and model of the vehicle, and any additional issues that are discovered during the repair process. Drivers are encouraged to obtain multiple quotes from reputable repair shops to ensure a fair price for the necessary repairs.

When is the Code Detected?

This Diagnostic Trouble Code (DTC) sets when the Occupant Restraint Controller (ORC) detects a short to voltage on the squib circuit for more than 2.5 seconds. This DTC transitions from active to stored when the module sees a recovery from a short to voltage for greater than 2.5 seconds.

Need more information about the B1C28 Jeep code?

Need more information on how to fix the B1C28 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1C28 Jeep code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1C28 Jeep Code

1. What are the common symptoms of OBDII code B1C28 in a Jeep related to the Left Side Seat Thorax Squib 1 High?

The common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the left side seat airbag system.

2. What could be the possible causes of OBDII code B1C28 in a Jeep indicating Left Side Seat Thorax Squib 1 High?

Potential causes may include a faulty seat airbag squib, wiring or connection issues, or a malfunction in the airbag control module.

3. How serious is OBDII code B1C28 in a Jeep for the Left Side Seat Thorax Squib 1 High?

This code indicates a potential problem with the airbag system, which could affect the proper deployment of the left side seat airbag in the event of a collision. It is essential to address this issue promptly for safety reasons.

4. Can I continue driving my Jeep with OBDII code B1C28 showing Left Side Seat Thorax Squib 1 High?

It is not recommended to drive the vehicle with this code present, as it indicates a potential safety issue with the airbag system. Have the problem diagnosed and repaired as soon as possible.

5. How can I diagnose and repair OBDII code B1C28 related to the Left Side Seat Thorax Squib 1 High in my Jeep?

Diagnosis typically involves inspecting the seat airbag squib, checking the wiring and connections, and using a diagnostic scanner to reset the code after repairs are made. It is advisable to consult a professional mechanic for accurate diagnosis and repair.

6. Are there any DIY tips for troubleshooting OBDII code B1C28 in a Jeep indicating Left Side Seat Thorax Squib 1 High?

While basic checks like ensuring the connections are secure can be done DIY, it is recommended to seek professional help for thorough diagnosis and repair to ensure the safety systems function correctly.

7. How much does it cost to fix OBDII code B1C28 related to the Left Side Seat Thorax Squib 1 High in a Jeep?

The cost of repairs can vary based on the specific issue causing the code, the labor rates in your area, and the parts needed for the repair. It is best to get a detailed estimate from a qualified mechanic.

8. Can resetting the OBDII code B1C28 in a Jeep for the Left Side Seat Thorax Squib 1 High resolve the issue?

Resetting the code may temporarily turn off the warning light, but if the underlying problem is not addressed, the code is likely to reappear. It is crucial to diagnose and fix the root cause of the issue.

9. Will OBDII code B1C28 in a Jeep impact the vehicle's overall performance?

This code directly relates to the safety system of the airbag deployment in the left side seat, and while it may not affect the vehicle's performance, it can compromise occupant safety in the event of a collision.

10. How often does OBDII code B1C28 for Left Side Seat Thorax Squib 1 High occur in Jeep vehicles?

While the frequency of this specific code may vary, any issue related to the airbag system should be taken seriously and addressed promptly to ensure the safety of the vehicle occupants.

Discuss the causes and fixes for B1C28 Jeep OBDII Code

Submit a New Comment

Code B1C28 Jeep comments

No comments found for this page.