Engine-Codes.com
Engine-Codes – Generic – B1C27

B1C27 Code - Left Side Seat Thorax Squib 1 Low

Quick Answer

The B1C27 diagnostic trouble code (DTC) indicates that there is a low voltage condition detected in the left side seat thorax squib 1 circuit. Common causes include Faulty seat thorax squib, Wiring or connector issues in the seat thorax squib circuit, Corrosion or damage to the electrical connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1C27 indicates Left Side Seat Thorax Squib 1 Low.
Common causes
Common causes include Faulty seat thorax squib, Wiring or connector issues in the seat thorax squib circuit, Corrosion or damage to the electrical connections.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 14, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B1C27 Description

The B1C27 diagnostic trouble code (DTC) indicates that there is a low voltage condition detected in the left side seat thorax squib 1 circuit. The seat thorax squib is a component of the vehicle's airbag system that is responsible for deploying the side airbag in the event of a side impact collision. When this code is triggered, it means that there is an issue with the electrical circuit that controls the deployment of the left side seat thorax airbag.

OBDII Code B1C27 - Left Side Seat Thorax Squib 1 Low
B1C27 Code - Left Side Seat Thorax Squib 1 Low

Common Causes of B1C27

  1. Faulty seat thorax squib
  2. Wiring or connector issues in the seat thorax squib circuit
  3. Corrosion or damage to the electrical connections
  4. Faulty airbag control module
  5. Impact or collision that damaged the seat thorax squib

Symptoms of B1C27

  1. Airbag warning light illuminated on the dashboard
  2. Inability to turn off the airbag warning light
  3. Side airbag system failure message displayed on the instrument cluster
  4. Side airbag not deploying during a collision

How to Fix B1C27

  1. Begin by diagnosing the specific cause of the low voltage condition in the left side seat thorax squib circuit using a diagnostic scanner.
  2. Inspect the wiring and connectors for any signs of damage, corrosion, or loose connections. Repair or replace as necessary.
  3. Test the seat thorax squib itself for proper functionality. If faulty, replace the seat thorax squib with a new one.
  4. Clear the DTC from the vehicle's memory using the diagnostic scanner.
  5. Perform a thorough test of the airbag system to ensure proper functionality and that the DTC does not return.

Cost to Fix B1C27

The cost of repairing a B1C27 DTC can vary depending on the specific cause of the issue and the cost of parts and labor. On average, the repair for this issue can range from $200 to $500, including parts and labor. However, it is essential to note that the actual cost may vary based on the location, vehicle make and model, and the rates of the auto repair shop. It is advisable to consult with a professional technician for an accurate estimate.

When is the Code Detected?

This Diagnostic Trouble Code (DTC) sets when the Occupant Restraint Controller (ORC) detects an open on the squib circuit for more than 2.5 seconds. This DTC transitions from active to stored, when the module sees a recovery from an open condition for greater than 2.5 seconds.

Need more information about the B1C27 code?

Need more information on how to fix the B1C27 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1C27 code diagnosed by a professional: Find a repair shop in your area

Code B1C27 Information for Specific Makes

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1C27 Code

1. What are the common symptoms of OBDII code B1C27 (Left Side Seat Thorax Squib 1 Low)?

- The common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the left side seat airbag system.

2. What are the possible causes of OBDII code B1C27?

- The code B1C27 may be triggered by a faulty left side seat thorax squib, wiring issues, loose connections, or a malfunction in the airbag control module.

3. How serious is OBDII code B1C27?

- OBDII code B1C27 indicates a potential issue with the left side seat airbag system, which can compromise the safety of the vehicle in the event of a collision. It should be addressed promptly.

4. How can I diagnose OBDII code B1C27?

- Diagnosis typically involves using a professional OBDII scanner to retrieve the specific fault code. Further inspection of the left side seat airbag components and related wiring may be necessary.

5. Can I still drive my vehicle with OBDII code B1C27 present?

- It is not recommended to drive the vehicle with an active airbag fault code like B1C27. The airbag system may not deploy properly in case of an accident, putting occupants at risk.

6. How can OBDII code B1C27 be repaired?

- Repairing B1C27 may involve replacing the left side seat thorax squib, repairing any damaged wiring or connectors, or resetting the airbag control module after addressing the underlying issue.

7. Is it possible to reset OBDII code B1C27 without fixing the problem?

- While you can clear the fault code temporarily with an OBDII scanner, it is crucial to address the root cause of the issue to ensure the proper functioning of the airbag system.

8. Are there any safety precautions to take when working on OBDII code B1C27?

- When working on the airbag system related to B1C27, it is essential to disconnect the vehicle's battery and wait for at least 10 minutes before starting any repairs to avoid accidental airbag deployment.

9. Can a DIY enthusiast fix OBDII code B1C27 at home?

- While some minor repairs like checking connections or replacing a faulty component may be done by experienced DIYers, diagnosing and repairing complex airbag system issues should be left to professionals.

10. How much does it cost to repair OBDII code B1C27?

- The repair cost for OBDII code B1C27 can vary depending on the specific cause of the issue, the cost of parts needed for replacement, and labor charges from a mechanic. It is advisable to get a quote from a trusted repair shop.

Discuss the causes and fixes for B1C27 OBDII Code

Submit a New Comment

Code B1C27 comments

No comments found for this page.