Engine-Codes.com
Engine-Codes – Dodge – B1C14 Dodge

B1C14 Dodge Code - Driver Active Headrest Control Circuit Open

Quick Answer

The B1C14 code for Dodge indicates a problem with the driver's active headrest control circuit being open. Common causes include Faulty wiring or connectors in the active headrest control circuit, A malfunctioning headrest motor, Damage to the active headrest sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1C14 Dodge indicates Driver Active Headrest Control Circuit Open.
Common causes
Common causes include Faulty wiring or connectors in the active headrest control circuit, A malfunctioning headrest motor, Damage to the active headrest sensor.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 08, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B1C14 Dodge Description

The B1C14 code for Dodge indicates a problem with the driver's active headrest control circuit being open. The active headrest system is designed to move the headrest forward in the event of a rear-end collision, reducing the risk of whiplash or other neck injuries. When this code appears, it means that there is an open circuit in the system, preventing it from functioning properly.

OBDII Code B1C14 Dodge - Driver Active Headrest Control Circuit Open
B1C14 Dodge Code - Driver Active Headrest Control Circuit Open

Common Causes of B1C14 Dodge

  1. Faulty wiring or connectors in the active headrest control circuit.
  2. A malfunctioning headrest motor.
  3. Damage to the active headrest sensor.
  4. Corrosion or water damage in the system.
  5. Issues with the control module.

Symptoms of B1C14 Dodge

  1. Airbag warning light illuminated on the dashboard.
  2. Inability of the active headrest to move forward during a rear-end collision.
  3. Potential neck discomfort or injury in the event of a rear-end collision.
  4. Diagnostic trouble code (DTC) B1C14 stored in the vehicle's computer system.

How to Fix B1C14 Dodge

  1. Begin by conducting a visual inspection of the wiring and connectors in the active headrest control circuit to check for any visible damage or corrosion.
  2. Test the headrest motor and sensor to determine if they are functioning properly.
  3. Check the control module for any faults or issues that may be causing the open circuit.
  4. Repair or replace any damaged wiring, connectors, sensors, or the control module as needed.
  5. Clear the DTC B1C14 code from the vehicle's computer system and test the active headrest system to ensure it is functioning correctly.

Cost to Fix B1C14 Dodge

The cost of repairing a B1C14 code for Dodge can vary depending on the specific cause of the issue and the extent of the repairs needed. In general, the cost of parts for this repair can range from $100 to $500, while labor costs can vary between $100 and $300. Overall, the total repair cost for addressing this code typically falls between $200 and $800. However, it's important to note that these are rough estimates, and actual repair costs may differ based on factors such as location, vehicle make and model, and labor rates at the auto repair shop. Be sure to consult with a professional mechanic for a more accurate cost estimate.

When is the Code Detected?

This code will set, if the Occupant Restraint Controller (ORC) detects an Open circuit on the Driver Head Restraint Solenoid Signal circuit.

Need more information about the B1C14 Dodge code?

Need more information on how to fix the B1C14 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1C14 Dodge code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1C14 Dodge Code

1. What are the common symptoms of OBDII code B1C14 in a Dodge related to the Driver Active Headrest Control Circuit Open?

The common symptoms include the active headrest system not functioning properly, the airbag warning light illuminating on the dashboard, and potential issues with the driver's headrest not adjusting as intended.

2. What are the possible causes of OBDII code B1C14 in a Dodge?

The code B1C14 typically indicates a problem with the driver active headrest control circuit being open, which could be caused by damaged wiring, a faulty control module, or a loose connection.

3. How can I diagnose the Driver Active Headrest Control Circuit Open issue in my Dodge?

To diagnose the issue, you can start by checking the wiring and connections related to the driver active headrest system, inspecting the control module for any signs of damage, and using an OBDII scanner to retrieve the specific fault codes.

4. Is it safe to drive my Dodge with the B1C14 code triggered?

It is generally not recommended to drive your Dodge with the B1C14 code triggered, as it may indicate a problem with the driver active headrest system, which is designed to enhance safety in the event of a collision.

5. Can I repair the Driver Active Headrest Control Circuit Open issue in my Dodge myself?

Depending on your experience and knowledge of automotive electrical systems, you may be able to repair the issue yourself by addressing any damaged wiring, replacing faulty components, or fixing loose connections. However, seeking professional assistance is advisable for complex repairs.

6. How much does it typically cost to repair the B1C14 code in a Dodge at a dealership or repair shop?

The cost of repairing the B1C14 code in a Dodge can vary depending on the underlying cause of the issue, the labor rates at the dealership or repair shop, and the cost of any replacement parts that may be needed. It is recommended to obtain a diagnostic and repair estimate from a qualified technician.

7. Will resetting the OBDII code B1C14 in my Dodge make the issue go away?

Resetting the OBDII code may temporarily clear the fault code from the system, but if the underlying issue causing the Driver Active Headrest Control Circuit Open is not addressed, the code is likely to reappear. It is important to diagnose and repair the root cause of the problem.

8. How important is it to fix the B1C14 code in a Dodge promptly?

It is essential to address the B1C14 code promptly to ensure the proper functioning of the driver active headrest system, which plays a crucial role in enhancing occupant safety in the event of a rear-end collision or sudden deceleration.

9. Can the B1C14 OBDII code in a Dodge affect the performance of other safety systems?

While the B1C14 code specifically relates to the Driver Active Headrest Control Circuit Open, issues with this system could potentially impact the overall safety performance of the vehicle, especially in scenarios where the active headrest is designed to provide protection.

10. How can I prevent the recurrence of the B1C14 code in my Dodge in the future?

To prevent the B1C14 code from reoccurring, it is advisable to regularly inspect and maintain the driver active headrest system, address any wiring or connection issues promptly, and follow the manufacturer's recommended maintenance schedule for your Dodge.

Discuss the causes and fixes for B1C14 Dodge OBDII Code

Submit a New Comment

Code B1C14 Dodge comments

No comments found for this page.