Engine-Codes.com
Engine-Codes – Chrysler – B1B95 Chrysler

B1B95 Chrysler Code - Passenger Seat Track Position Sensor Circuit Open

Quick Answer

The B1B95 diagnostic trouble code (DTC) for Chrysler vehicles specifically refers to a fault in the passenger seat track position sensor circuit being open. Common causes include Damaged wiring or connectors in the seat track position sensor circuit, Faulty passenger seat track position sensor, Corrosion or moisture damage in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1B95 Chrysler indicates Passenger Seat Track Position Sensor Circuit Open.
Common causes
Common causes include Damaged wiring or connectors in the seat track position sensor circuit, Faulty passenger seat track position sensor, Corrosion or moisture damage in the sensor circuit.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 08, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B1B95 Chrysler Description

The B1B95 diagnostic trouble code (DTC) for Chrysler vehicles specifically refers to a fault in the passenger seat track position sensor circuit being open. This sensor is crucial for accurately determining the position of the passenger seat, ensuring proper airbag deployment in the event of a collision.

OBDII Code B1B95 Chrysler - Passenger Seat Track Position Sensor Circuit Open
B1B95 Chrysler Code - Passenger Seat Track Position Sensor Circuit Open

Common Causes of B1B95 Chrysler

  1. Damaged wiring or connectors in the seat track position sensor circuit.
  2. Faulty passenger seat track position sensor.
  3. Corrosion or moisture damage in the sensor circuit.
  4. Issues with the vehicle's onboard computer system.
  5. Previous collision or impact causing damage to the sensor or wiring.

Symptoms of B1B95 Chrysler

  1. Airbag warning light illuminated on the dashboard.
  2. Inaccurate or inconsistent readings on the passenger seat position.
  3. Airbag system failure message displayed on the instrument cluster.
  4. Passenger airbag may not deploy in a collision.
  5. Loss of communication with the passenger seat sensor.

How to Fix B1B95 Chrysler

  1. Start by inspecting the wiring and connectors for any visible damage or corrosion. Repair or replace any damaged components.
  2. Test the passenger seat track position sensor to determine if it is functioning properly. Replace the sensor if necessary.
  3. Clear the DTC from the vehicle's computer system using a diagnostic scanner.
  4. Perform a system reset to ensure proper communication between the sensor and the airbag system.
  5. Test the airbag system to verify that the issue has been resolved and that the airbags deploy as intended.

Cost to Fix B1B95 Chrysler

The cost of repairing a B1B95 Chrysler diagnostic trouble code can vary depending on the specific cause of the issue. In general, replacing a faulty passenger seat track position sensor or repairing damaged wiring can cost between $200 to $500, including parts and labor. However, additional diagnostic time may be required to pinpoint the exact cause of the problem, which can increase the overall cost. It's recommended to consult with a qualified mechanic or dealership for a more accurate estimate based on your vehicle's make and model.

Need more information about the B1B95 Chrysler code?

Need more information on how to fix the B1B95 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1B95 Chrysler code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1B95 Chrysler Code

1. What does the OBDII code B1B95 mean on a Chrysler vehicle?

The B1B95 code indicates an issue with the Passenger Seat Track Position Sensor Circuit, specifically an open circuit or disconnection.

2. What are the common symptoms associated with the B1B95 code?

Symptoms may include the airbag warning light being illuminated, malfunctioning passenger seat sensors, or the airbag system being disabled.

3. What causes the B1B95 code to appear?

Common causes include a damaged or disconnected passenger seat track position sensor, corroded or damaged wiring, or a faulty sensor.

4. Can the B1B95 code affect the airbag system?

Yes, this code can disable the airbag system for the passenger seat, potentially compromising occupant safety in a collision.

5. How do I diagnose the B1B95 code?

Diagnosis typically involves inspecting the wiring and connectors for damage, testing the seat track position sensor, and using a scan tool to monitor sensor operation.

6. Can I drive my vehicle with the B1B95 code active?

While the vehicle may still be drivable, the airbag system may not function properly, posing a safety risk in an accident.

7. How is the B1B95 code fixed?

Repairs may include reconnecting or replacing the sensor, repairing damaged wiring, or addressing issues with the sensor's electrical connections.

8. How much does it cost to fix the B1B95 code?

Repair costs vary but typically range from $100 to $300, depending on whether the sensor, wiring, or connectors need replacement.

9. Can a faulty passenger seat track position sensor cause other codes?

Yes, it may trigger additional airbag-related codes if the sensor affects other components within the system.

10. Do I need to reset the airbag system after fixing the B1B95 code?

Yes, after repairs, the airbag system should be reset using a scan tool to clear the code and ensure proper functionality.

Discuss the causes and fixes for B1B95 Chrysler OBDII Code

Submit a New Comment

Code B1B95 Chrysler comments

No comments found for this page.