B1B92 Dodge Code - Passenger Seat Track Position Sensor Circuit Performance
Quick Answer
The B1B92 diagnostic trouble code for Dodge vehicles specifically refers to an issue with the passenger seat track position sensor circuit performance. Common causes include Damaged wiring or connectors in the sensor circuit, Faulty passenger seat track position sensor, Corrosion or debris affecting sensor performance. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B92 Dodge indicates Passenger Seat Track Position Sensor Circuit Performance.
- Common causes
- Common causes include Damaged wiring or connectors in the sensor circuit, Faulty passenger seat track position sensor, Corrosion or debris affecting sensor performance.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1B92 Dodge Description
The B1B92 diagnostic trouble code for Dodge vehicles specifically refers to an issue with the passenger seat track position sensor circuit performance. This sensor is responsible for detecting the position of the passenger seat and sending this information to the vehicle's computer system. The computer uses this data to adjust airbag deployment, seat belt tension, and other safety features to ensure optimal protection for the passenger in the event of a collision.
Common Causes of B1B92 Dodge
- Damaged wiring or connectors in the sensor circuit.
- Faulty passenger seat track position sensor.
- Corrosion or debris affecting sensor performance.
- Issues with the vehicle's computer system.
- Impact damage to the passenger seat affecting sensor alignment.
Symptoms of B1B92 Dodge
- Airbag warning light illuminated on the dashboard.
- Inconsistent or incorrect seat belt tension.
- Airbags not deploying in a collision.
- Passenger seat not adjusting properly.
- Unusual clicking or grinding noises when adjusting the passenger seat.
How to Fix B1B92 Dodge
- Begin by conducting a thorough inspection of the wiring and connectors in the sensor circuit to identify any damage or corrosion.
- Test the passenger seat track position sensor using a multimeter to check for proper functionality.
- Clean any debris or corrosion affecting the sensor performance.
- Reset the vehicle's computer system to clear any stored error codes related to the sensor circuit.
- If necessary, replace the faulty sensor or repair any damaged wiring to restore proper function.
Cost to Fix B1B92 Dodge
The typical repair costs for addressing a B1B92 code related to the passenger seat track position sensor circuit performance can range from $150 to $500, depending on the specific cause of the issue and the parts/labour required for the repair. It's important to note that diagnosis time and labour rates at auto repair shops can vary, so it's advisable to obtain quotes from local shops for a more accurate estimate.
Need more information about the B1B92 Dodge code?
Need more information on how to fix the B1B92 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B92 Dodge code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B92 Dodge Code
1. What are the common symptoms of OBDII code B1B92 in a Dodge related to the passenger seat track position sensor circuit?
- Common symptoms include the passenger seat being unable to move forward or backward, the seat position not adjusting properly, or the airbag warning light illuminating.
2. What are the possible causes of the B1B92 code in a Dodge related to the passenger seat track position sensor circuit?
- Possible causes include a faulty seat track position sensor, damaged wiring or connectors in the sensor circuit, or a malfunctioning seat control module.
3. How can I diagnose the B1B92 code in a Dodge related to the passenger seat track position sensor circuit?
- Diagnosing the code involves using an OBDII scanner to retrieve the specific fault codes, inspecting the wiring and connectors for damage, and testing the seat track position sensor for proper function.
4. Can I still drive my Dodge with the B1B92 code related to the passenger seat track position sensor circuit?
- It is not recommended to drive the vehicle with this code present, as it may affect the proper operation of the passenger seat and potentially compromise safety features like airbags.
5. How can I reset or clear the B1B92 code related to the passenger seat track position sensor circuit in my Dodge?
- To clear the code, you can use an OBDII scanner to reset the fault codes after addressing the underlying issue with the passenger seat track position sensor circuit.
6. Is it possible to repair the B1B92 code related to the passenger seat track position sensor circuit in a Dodge by myself?
- While some simple issues like loose connections can be fixed by an owner, diagnosing and repairing more complex problems may require professional help to ensure proper repairs and safety.
7. What are the potential repair tips for fixing the B1B92 code in a Dodge related to the passenger seat track position sensor circuit?
- Repair tips may include checking and securing the wiring connections, replacing a faulty seat track position sensor, or reprogramming the seat control module if necessary.
8. How much does it typically cost to repair the B1B92 code related to the passenger seat track position sensor circuit in a Dodge?
- Repair costs can vary depending on the specific issue, but they may range from a few hundred to over a thousand dollars, considering parts and labor expenses.
9. Will fixing the B1B92 code related to the passenger seat track position sensor circuit in a Dodge require a visit to a dealership or can it be done by an independent mechanic?
- Independent mechanics with experience in automotive electronics and sensor systems can often diagnose and repair the issue, but dealership service departments may also have specialized knowledge and tools for these repairs.
10. How long does it typically take to repair the B1B92 code related to the passenger seat track position sensor circuit in a Dodge?
- The repair time can vary depending on the specific problem and the expertise of the technician, but it may take anywhere from a couple of hours to a full day to diagnose and fix the issue.
Discuss the causes and fixes for B1B92 Dodge OBDII Code
Code B1B92 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.