B1B91 RAM Code - Driver Seat Track Position Sensor Configuration Mismatch
Quick Answer
The B1B91 RAM code indicates a driver seat track position sensor configuration mismatch. Common causes include Faulty driver seat track position sensor, Loose or damaged wiring/connectors related to the sensor, Mechanical issues with the seat track mechanism. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B91 RAM indicates Driver Seat Track Position Sensor Configuration Mismatch.
- Common causes
- Common causes include Faulty driver seat track position sensor, Loose or damaged wiring/connectors related to the sensor, Mechanical issues with the seat track mechanism.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1B91 RAM Description
The B1B91 RAM code indicates a driver seat track position sensor configuration mismatch. This means that there is a discrepancy between the expected position of the driver's seat track sensor and the actual position detected by the sensor. The driver's seat track position sensor is responsible for determining the position of the driver's seat, allowing for proper adjustment and control. When there is a configuration mismatch, it can lead to issues with the seat's movement and adjustment, affecting the driver's comfort and safety.
Common Causes of B1B91 RAM
- Faulty driver seat track position sensor.
- Loose or damaged wiring/connectors related to the sensor.
- Mechanical issues with the seat track mechanism.
- Software or calibration issues with the vehicle's computer system.
- Impact or damage to the driver's seat causing misalignment.
Symptoms of B1B91 RAM
- Inability to adjust the driver's seat position.
- Seat moving erratically or not responding to controls.
- Warning light on the dashboard related to the seat position sensor.
- Unusual noises coming from the seat track mechanism.
- Malfunction of other systems dependent on seat position data.
How to Fix B1B91 RAM
- Begin by diagnosing the specific cause of the configuration mismatch using a diagnostic scanner to read the code and identify the underlying issue.
- Inspect the driver seat track position sensor and its wiring for any damage or loose connections. Repair or replace as necessary.
- Check the seat track mechanism for any obstructions or mechanical issues that may be causing the mismatch. Lubricate or repair as needed.
- Perform a calibration of the seat position sensor using the vehicle's computer system to ensure proper alignment and functioning.
- Clear the diagnostic trouble codes from the system and test the driver's seat adjustment to verify that the issue has been resolved.
Cost to Fix B1B91 RAM
The typical repair costs for addressing a B1B91 RAM code can vary depending on the specific cause of the configuration mismatch. In general, the cost of replacing a driver seat track position sensor can range from $150 to $300, including parts and labor. If the issue is related to wiring or mechanical problems, the cost may increase due to additional diagnostic and repair work required. It's important to note that labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150. For a more accurate estimate, it is recommended to consult with a local auto repair shop.
Need more information about the B1B91 RAM code?
Need more information on how to fix the B1B91 RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B91 RAM code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B91 RAM Code
1. What does the OBDII code B1B91 mean in a RAM vehicle?
The B1B91 code indicates a "Driver Seat Track Position Sensor Configuration Mismatch," meaning the system has detected an issue with the configuration or calibration of the driver seat track position sensor.
2. What are the common symptoms of the B1B91 code?
Symptoms may include an illuminated airbag warning light, inability to adjust the driver seat properly, or issues with seat memory functions.
3. What causes the B1B91 code to appear?
The code is typically caused by a misconfigured seat position sensor, a faulty or damaged sensor, wiring issues, or improper calibration after seat component replacement.
4. Can the B1B91 code affect airbag deployment?
Yes, the code may impact airbag system functionality, as the seat position sensor provides data for proper deployment in a crash.
5. How is the B1B91 code diagnosed?
A technician will use a scan tool to read the code, inspect the seat position sensor and wiring, and verify proper configuration and calibration.
6. Can I drive my RAM vehicle with the B1B91 code active?
While the vehicle may still be operable, the airbag system could be compromised, posing a safety risk in the event of a collision.
7. How do you fix the B1B91 code?
Repairs may involve recalibrating the seat position sensor, replacing a damaged sensor, or repairing faulty wiring or connectors.
8. Do I need to replace the driver seat track to fix the B1B91 code?
Not necessarily. The issue often lies with the sensor, wiring, or calibration, so replacing the entire seat track is usually not required unless it's physically damaged.
9. How much does it cost to repair the B1B91 code?
Repair costs vary but can range from $100 to $300, depending on whether the sensor needs replacement or if only calibration or wiring repairs are required.
10. Can I reset the B1B91 code myself?
Resetting the code without addressing the root cause is not recommended, as the issue may persist or compromise safety systems. Always diagnose and repair the problem first.
Discuss the causes and fixes for B1B91 RAM OBDII Code
Code B1B91 RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.