B1B91 Chrysler Code - Driver Seat Track Position Sensor Configuration Mismatch
Quick Answer
The B1B91 Chrysler diagnostic trouble code (DTC) specifically refers to a driver seat track position sensor configuration mismatch. Common causes include Faulty seat track position sensor, Wiring issues or electrical connection problems, Software glitch in the ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B91 Chrysler indicates Driver Seat Track Position Sensor Configuration Mismatch.
- Common causes
- Common causes include Faulty seat track position sensor, Wiring issues or electrical connection problems, Software glitch in the ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1B91 Chrysler Description
The B1B91 Chrysler diagnostic trouble code (DTC) specifically refers to a driver seat track position sensor configuration mismatch. In modern vehicles, the driver's seat is equipped with various sensors to ensure proper adjustment and positioning for optimal comfort and safety. The seat track position sensor is responsible for detecting the position of the driver's seat within the vehicle and relaying this information to the vehicle's electronic control module (ECM).
Common Causes of B1B91 Chrysler
- Faulty seat track position sensor.
- Wiring issues or electrical connection problems.
- Software glitch in the ECM.
- Physical obstruction preventing proper seat movement.
- Previous repair or modification causing a misalignment.
Symptoms of B1B91 Chrysler
- Inability to adjust the driver's seat position.
- Seat moving unexpectedly or erratically.
- Warning light illuminated on the dashboard.
- Uncomfortable seating position while driving.
How to Fix B1B91 Chrysler
- Begin by conducting a visual inspection of the driver's seat track, looking for any physical obstructions or damage.
- Check the wiring and electrical connections related to the seat track position sensor for any signs of wear, corrosion, or disconnection. Repair or replace as needed.
- Use a diagnostic scan tool to reset the ECM and recalibrate the seat track position sensor.
- If the issue persists, consider replacing the seat track position sensor itself to ensure accurate readings and proper functionality.
- Test the seat adjustment mechanism to verify that the issue has been resolved and the sensor is now correctly configured.
Cost to Fix B1B91 Chrysler
The cost of repairing a B1B91 Chrysler DTC can vary depending on the specific cause of the issue and the labor rates in your area. On average, you can expect to pay between $150 and $400 for parts and labor. Keep in mind that diagnostic time and labor rates can vary, so it's best to contact local auto repair shops for more accurate pricing information.
Need more information about the B1B91 Chrysler code?
Need more information on how to fix the B1B91 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B91 Chrysler code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B91 Chrysler Code
1. What does the OBDII code B1B91 mean on a Chrysler?
The B1B91 code indicates a "Driver Seat Track Position Sensor Configuration Mismatch," meaning the sensor's configuration or data is not recognized by the vehicle’s control module.
2. What are the common symptoms of the B1B91 code?
Symptoms may include an illuminated airbag warning light, malfunctioning seat position memory, or failure of the seat to adjust properly.
3. What causes the B1B91 code to appear?
Common causes include a faulty driver seat track position sensor, incorrect sensor installation, damaged wiring or connectors, or an improperly programmed control module.
4. Can the B1B91 code affect airbag deployment?
Yes, the driver seat track position sensor is used to determine airbag deployment force, so a malfunction may impact airbag functionality.
5. How do you diagnose the B1B91 code?
Diagnosis involves using a scan tool to check for additional codes, inspecting the seat track position sensor and wiring, and ensuring the sensor is installed and configured correctly.
6. How do you fix the B1B91 code?
Repairs may include replacing the driver seat track position sensor, repairing damaged wiring or connectors, or reprogramming the sensor in the vehicle’s control module.
7. Can I drive with the B1B91 code active?
While the car may still be drivable, it is not recommended since the airbag system could be compromised, posing a safety risk in a collision.
8. How much does it cost to fix the B1B91 code?
Repair costs vary depending on the issue but typically range from $100 to $300 for sensor replacement or wiring repairs, plus diagnostic fees.
9. Is the B1B91 code specific to Chrysler vehicles?
While it is common on Chrysler vehicles, similar codes can appear in other brands with similar seat position sensors.
10. Can the B1B91 code resolve itself?
It’s unlikely. The issue requires proper diagnosis and repair to ensure the sensor is functioning and configured correctly.
Discuss the causes and fixes for B1B91 Chrysler OBDII Code
Code B1B91 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.