B1B8F Code - Driver Seat Track Position Sensor Circuit Open

Quick Answer

The B1B8F diagnostic trouble code (DTC) indicates a problem with the driver seat track position sensor circuit being open. Common causes include Damaged wiring or connectors in the seat track position sensor circuit, Faulty driver seat track position sensor, Corrosion or debris affecting the sensor's operation. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means

B1B8F indicates Driver Seat Track Position Sensor Circuit Open.

Common causes

Common causes include Damaged wiring or connectors in the seat track position sensor circuit, Faulty driver seat track position sensor, Corrosion or debris affecting the sensor's operation.

Severity

High - diagnose this code as soon as possible.

Can I drive?

Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

• Description
• Common Causes
• Symptoms
• How To Fix
• Cost to Fix
• FAQs
• Comments
• Add Comment

Common Causes of B1B8F

Symptoms of B1B8F

How to Fix B1B8F

Cost to Fix B1B8F

Need more information about the B1B8F code?

Need more information on how to fix the B1B8F code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1B8F code diagnosed by a professional: Find a repair shop in your area

Code B1B8F Information for Specific Makes

• B1B8F Chrysler — Driver Seat Track Position Sensor Circuit Open
• B1B8F Dodge — Driver Seat Track Position Sensor Circuit Open
• B1B8F Jeep — Driver Seat Track Position Sensor Circuit Open
• B1B8F Mitsubishi — Driver Seat Track Position Sensor Circuit Open
• B1B8F RAM — Driver Seat Track Position Sensor Circuit Open

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

• Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
• Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
• Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
• Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1B8F Code

1. What are the common symptoms of OBDII code B1B8F (Driver Seat Track Position Sensor Circuit Open)?

- Common symptoms include the driver's seat being stuck in one position, the seat not adjusting properly, and warning lights on the dashboard.

2. What can cause the OBDII code B1B8F to trigger?

- This code can be triggered by a damaged seat track position sensor, a loose or disconnected wiring harness, or a faulty seat control module.

3. How can I diagnose the cause of OBDII code B1B8F?

- You can diagnose the issue by inspecting the wiring harness for any damage, checking the connections of the seat track position sensor, and using a diagnostic tool to scan for trouble codes.

4. Can I drive my vehicle with the OBDII code B1B8F active?

- It is not recommended to drive with this code active, as it can affect the proper functioning of the driver's seat and potentially compromise safety.

5. What are the repair options for OBDII code B1B8F?

- Repair options include replacing the seat track position sensor, repairing or replacing damaged wiring, and reprogramming the seat control module if necessary.

6. How much does it typically cost to repair OBDII code B1B8F?

- The cost of repair can vary depending on the extent of the damage and the specific components that need to be replaced. It is recommended to consult with a professional for an accurate estimate.

7. Can I reset the OBDII code B1B8F without fixing the underlying issue?

- While you can clear the code using a diagnostic tool, it is important to address the underlying issue to prevent the code from reoccurring and ensure proper functioning of the driver's seat.

8. Is it possible to repair OBDII code B1B8F myself, or should I seek professional help?

- Depending on your level of experience and access to tools, you may be able to repair this code yourself by following repair guides. However, if you are unsure, it is best to seek professional help.

9. Are there any temporary solutions to address the OBDII code B1B8F until I can get it repaired?

- Unfortunately, there are no recommended temporary solutions for this code, as it directly affects the functionality of the driver's seat.

10. How can I prevent OBDII code B1B8F from occurring in the future?

- To prevent this code from occurring in the future, regularly inspect the wiring harness and connections related to the seat track position sensor, and address any issues promptly.