B1B87 Code - Passenger Seat Weight Sensor 1 Right Rear Performance
Quick Answer
The B1B87 diagnostic trouble code (DTC) refers to an issue with the passenger seat weight sensor 1 right rear performance in a vehicle. Common causes include Faulty passenger seat weight sensor, Loose or damaged wiring connections, Corrosion in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B87 indicates Passenger Seat Weight Sensor 1 Right Rear Performance.
- Common causes
- Common causes include Faulty passenger seat weight sensor, Loose or damaged wiring connections, Corrosion in the sensor circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1B87 Description
The B1B87 diagnostic trouble code (DTC) refers to an issue with the passenger seat weight sensor 1 right rear performance in a vehicle. This sensor is responsible for detecting the weight of the passenger seated in the right rear seat, which is crucial for the proper functioning of the vehicle's occupant detection system. The occupant detection system uses this information to determine whether or not to deploy the airbag in the event of a collision.
Common Causes of B1B87
- Faulty passenger seat weight sensor
- Loose or damaged wiring connections
- Corrosion in the sensor circuit
- Software issues in the occupant detection system
- Physical damage to the sensor due to impact or wear and tear
Symptoms of B1B87
- Airbag warning light illuminated on the dashboard
- Inconsistent airbag deployment
- Faulty seat belt reminder system
- Passenger airbag off light staying on
- Erratic behavior of the airbag system during normal driving conditions
How to Fix B1B87
- Begin by diagnosing the issue using a diagnostic scan tool to retrieve the specific code and pinpoint the exact cause of the problem.
- Inspect the passenger seat weight sensor, wiring connections, and sensor circuit for any visible damage or corrosion. Repair or replace any damaged components as needed.
- Reset the airbag system using the diagnostic scan tool to clear the DTC and recalibrate the sensor.
- Test the sensor by seating a passenger in the right rear seat and ensuring that the airbag system functions correctly.
- If the issue persists, consult the vehicle's service manual for further troubleshooting steps or seek professional assistance from a certified mechanic.
Cost to Fix B1B87
The cost of repairing a passenger seat weight sensor 1 right rear performance issue can vary depending on the make and model of the vehicle, the extent of the damage, and the labor rates in your area. On average, you can expect to pay anywhere from $200 to $500 for parts and labor. Keep in mind that diagnostic time and labor rates at auto repair shops can vary, so it's best to get a personalized quote from a reputable mechanic.
Need more information about the B1B87 code?
Need more information on how to fix the B1B87 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B87 code diagnosed by a professional: Find a repair shop in your area
Code B1B87 Information for Specific Makes
- B1B87 Chrysler — Passenger Seat Weight Sensor 1 Right Rear Performance
- B1B87 Dodge — Passenger Seat Weight Sensor 1 Right Rear Performance
- B1B87 Jeep — Passenger Seat Weight Sensor 1 Right Rear Performance
- B1B87 Mitsubishi — Passenger Seat Weight Sensor 1 Right Rear Performance
- B1B87 RAM — Passenger Seat Weight Sensor 1 Right Rear Performance
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B87 Code
What does the OBDII code B1B87 indicate?
The OBDII code B1B87 indicates a performance issue with the right rear passenger seat weight sensor.
What symptoms might I experience with code B1B87?
Common symptoms include the airbag warning light illuminating, the passenger seat airbag being disabled, or improper seatbelt warnings.
What are the common causes of code B1B87?
Common causes include a faulty weight sensor, damaged wiring or connectors, or issues with the airbag control module.
Can I drive my vehicle with code B1B87?
While you can drive with this code, it is not recommended as it may affect airbag deployment in a crash, compromising safety.
How can I troubleshoot code B1B87?
Start by inspecting the wiring and connectors for damage, then test the weight sensor for proper functionality using a multimeter.
What are the steps to repair code B1B87?
Repair steps include checking and repairing any damaged wiring, replacing the faulty weight sensor, and clearing the code from the vehicle’s computer.
Is it necessary to reset the airbag system after fixing code B1B87?
Yes, after repairs, it is essential to reset the airbag system using an OBDII scanner to clear the code and turn off the warning light.
How much does it typically cost to fix code B1B87?
Repair costs can vary widely depending on the problem, but replacing a weight sensor can range from $100 to $500, including parts and labor.
Will code B1B87 affect my vehicle's inspection status?
Yes, if the airbag light is on due to code B1B87, it may cause your vehicle to fail an inspection that checks for airbag system functionality.
Can I fix code B1B87 myself?
If you have experience with automotive repairs, you can check wiring and replace the weight sensor yourself, but it’s advisable to consult a professional for airbag-related issues.
Discuss the causes and fixes for B1B87 OBDII Code
Code B1B87 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.