B1B73 Chrysler Code - Left Side Satellite Acceleration Sensor 2 Internal
Quick Answer
The B1B73 Chrysler diagnostic trouble code (DTC) specifically refers to the Left Side Satellite Acceleration Sensor 2 Internal. Common causes include Faulty left side satellite acceleration sensor 2, Wiring or connection issues related to the sensor, Corrosion or damage to the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B73 Chrysler indicates Left Side Satellite Acceleration Sensor 2 Internal.
- Common causes
- Common causes include Faulty left side satellite acceleration sensor 2, Wiring or connection issues related to the sensor, Corrosion or damage to the sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1B73 Chrysler Description
The B1B73 Chrysler diagnostic trouble code (DTC) specifically refers to the Left Side Satellite Acceleration Sensor 2 Internal. This code indicates that there is a malfunction or internal fault within the left side satellite acceleration sensor 2 in the vehicle. The satellite acceleration sensor is a crucial component of the vehicle's safety system, as it helps to detect changes in acceleration and deceleration, which is essential for the proper functioning of various safety features such as airbags and stability control systems.
Common Causes of B1B73 Chrysler
- Faulty left side satellite acceleration sensor 2.
- Wiring or connection issues related to the sensor.
- Corrosion or damage to the sensor.
- Software or programming issues within the vehicle's control module.
Symptoms of B1B73 Chrysler
- Airbag warning light illuminated on the dashboard.
- Stability control system warning light activated.
- Inaccurate or erratic readings on the vehicle's acceleration display.
- Vehicle may exhibit unstable handling or traction issues.
How to Fix B1B73 Chrysler
- Begin by diagnosing the specific cause of the B1B73 code using a professional diagnostic tool.
- Inspect the left side satellite acceleration sensor 2 for any visible damage or corrosion.
- Check the wiring and connections related to the sensor for any loose connections or frayed wires.
- If the sensor is faulty, replace it with a new, OEM-quality sensor.
- Clear the DTC and perform a test drive to ensure that the issue has been resolved.
Cost to Fix B1B73 Chrysler
The typical repair costs for addressing the B1B73 Chrysler code can vary depending on the specific cause of the issue and the labor rates in your area. On average, the cost of replacing a satellite acceleration sensor can range from $200 to $500, including parts and labor. However, it's important to note that diagnostic time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate. Additionally, rates may be higher at dealerships or in metropolitan areas, while independent shops may offer more competitive pricing.
When is the Code Detected?
Need more information about the B1B73 Chrysler code?
Need more information on how to fix the B1B73 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B73 Chrysler code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B73 Chrysler Code
1. What are the common symptoms of OBDII code B1B73 Chrysler (Left Side Satellite Acceleration Sensor 2 Internal)?
- Common symptoms include the illumination of the airbag warning light on the dashboard, potential loss of airbag functionality, and diagnostic trouble code B1B73 stored in the system.
2. What can cause the OBDII code B1B73 Chrysler to trigger?
- The code B1B73 Chrysler is triggered when there is an internal fault detected in the left side satellite acceleration sensor 2 of the airbag system.
3. How serious is the OBDII code B1B73 Chrysler (Left Side Satellite Acceleration Sensor 2 Internal)?
- This code is related to the airbag system, so it should be taken seriously. It may indicate a potential issue with the proper functioning of the airbags in the event of a collision.
4. Is it safe to drive with the OBDII code B1B73 Chrysler active?
- It is not recommended to drive with the B1B73 code active, as it may compromise the proper operation of the airbag system in the event of an accident.
5. How can I diagnose and repair the OBDII code B1B73 Chrysler?
- Diagnosing and repairing the B1B73 code typically involves inspecting the left side satellite acceleration sensor 2 for any wiring issues, loose connections, or internal faults. Repair may involve sensor replacement or addressing wiring issues.
6. Can I reset the OBDII code B1B73 Chrysler without fixing the underlying issue?
- Resetting the code without addressing the underlying problem will likely result in the code reappearing once the system detects the fault again. It is important to diagnose and repair the issue first.
7. Are there any DIY repair tips for fixing the OBDII code B1B73 Chrysler?
- DIY repair tips may include checking the sensor's wiring harness for damage, ensuring secure connections, and carefully inspecting the sensor for any signs of physical damage.
8. How much does it cost to repair the OBDII code B1B73 Chrysler at a mechanic or dealership?
- The cost of repairing the B1B73 code can vary depending on the extent of the issue, labor rates, and parts costs. It is recommended to obtain quotes from different repair facilities.
9. Can the OBDII code B1B73 Chrysler be intermittent?
- Yes, the B1B73 code can sometimes be intermittent, but it is still important to diagnose and repair the issue to ensure the proper functioning of the airbag system.
10. How long does it take to repair the OBDII code B1B73 Chrysler?
- The repair time for the B1B73 code can vary depending on the exact cause of the issue and the complexity of the repair. It is best to consult with a qualified mechanic for an accurate estimate.
Discuss the causes and fixes for B1B73 Chrysler OBDII Code
Code B1B73 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.