Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
The cost to diagnose the B1B57 Fiat code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
This Diagnostic Trouble Code (DTC) sets when the Occupant Restraint Controller (ORC) detects the (R58) Seat Belt Switch Sense circuit is shorted to ground or the seat belt switch become shorted together for more than 2.5 seconds. This DTC transitions from active to stored when the module sees a recovery from the shorted together condition for greater than five seconds.
When powered, the Occupant Restraint Controller (ORC) sends a test current across the Passenger Seat Belt Buckle Switch circuits every 100 ms to verify the integrity of the switch and wiring. The front seat belt switches cannot be adjusted or repaired and, if ineffective or damaged, the entire front seat belt buckle-half unit must be replaced. The airbag warning lamp will display in the instrument cluster for this fault. The ORC monitors the status of the seat belt switch circuits at power up and every 100ms thereafter while the ignition is in on.
Need more information on how to fix the B1B57 Fiat code? Get Access to Factory Service Manuals
Get the B1B57 Fiat code diagnosed by a professional: Find a repair shop in your area