Engine-Codes.com
Engine-Codes – Dodge – B1B12 Dodge

B1B12 Dodge Code - Driver Knee Bolster Squib Circuit Open

Quick Answer

The B1B12 diagnostic trouble code for Dodge vehicles refers to the Driver Knee Bolster Squib Circuit Open. Common causes include Wiring issues such as breaks, shorts, or corrosion in the circuit, Faulty knee bolster squib, Loose or damaged connectors in the circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1B12 Dodge indicates Driver Knee Bolster Squib Circuit Open.
Common causes
Common causes include Wiring issues such as breaks, shorts, or corrosion in the circuit, Faulty knee bolster squib, Loose or damaged connectors in the circuit.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 11, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B1B12 Dodge Description

The B1B12 diagnostic trouble code for Dodge vehicles refers to the Driver Knee Bolster Squib Circuit Open. This code indicates that there is an issue with the circuit responsible for the driver's knee bolster airbag system. The knee bolster airbag is an important safety feature designed to protect the driver's knees and lower body in the event of a collision.

OBDII Code B1B12 Dodge - Driver Knee Bolster Squib Circuit Open
B1B12 Dodge Code - Driver Knee Bolster Squib Circuit Open

Common Causes of B1B12 Dodge

  1. Wiring issues such as breaks, shorts, or corrosion in the circuit
  2. Faulty knee bolster squib
  3. Loose or damaged connectors in the circuit
  4. Faulty airbag control module
  5. Impact or collision that damaged the knee bolster airbag system

Symptoms of B1B12 Dodge

  1. Airbag warning light illuminated on the dashboard
  2. Failure of the knee bolster airbag to deploy during a crash
  3. Diagnostic trouble code B1B12 stored in the vehicle's computer system
  4. Loss of power to the knee bolster airbag system

How to Fix B1B12 Dodge

  1. Begin by diagnosing the exact cause of the circuit open issue, using a scan tool to read the trouble codes and inspecting the wiring and connectors for damage.
  2. Repair any damaged wiring or connectors in the circuit, replacing them as needed.
  3. Replace the faulty knee bolster squib if necessary.
  4. Clear the trouble codes from the vehicle's computer system and perform a test to ensure that the knee bolster airbag system is functioning correctly.
  5. If the issue persists, further diagnostics may be required to identify and address any underlying problems.

Cost to Fix B1B12 Dodge

The cost of repairing a Driver Knee Bolster Squib Circuit Open issue can vary depending on the specific cause of the problem and the extent of the repairs needed. On average, the cost of parts for this repair can range from $200 to $500, while labor costs can range from $100 to $300.

When is the Code Detected?

This Diagnostic Trouble Code (DTC) sets when the ORC detects an open on the driver knee bolster squib circuit for more than 2.5 seconds. This DTC transitions from active to stored when the ORC sees a recovery from a short to ground for greater than 2.5 seconds.

Need more information about the B1B12 Dodge code?

Need more information on how to fix the B1B12 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1B12 Dodge code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1B12 Dodge Code

1. What are the common symptoms of OBDII code B1B12 in a Dodge related to the Driver Knee Bolster Squib Circuit Open?

- The common symptoms include an illuminated airbag warning light on the dashboard and potential issues with the vehicle's airbag system.

2. What are the possible causes of the Driver Knee Bolster Squib Circuit Open OBDII code in a Dodge?

- The code B1B12 can be caused by a faulty driver knee bolster squib, damaged wiring or connectors in the circuit, or a malfunctioning airbag control module.

3. How can I diagnose the Driver Knee Bolster Squib Circuit Open issue in my Dodge?

- Diagnosing this issue typically involves using an OBDII scanner to retrieve the specific fault code, conducting a visual inspection of the wiring and connectors, and testing the driver knee bolster squib for proper functionality.

4. Can I drive my Dodge with the B1B12 OBDII code present?

- It is not recommended to drive the vehicle with the B1B12 code active, as it indicates a potential problem with the airbag system, which could compromise safety in the event of a collision.

5. How can I repair the Driver Knee Bolster Squib Circuit Open issue in my Dodge?

- Repairing the B1B12 code may involve replacing the faulty driver knee bolster squib, repairing damaged wiring or connectors, or reprogramming the airbag control module, depending on the root cause of the problem.

6. Are there any safety precautions I should take when working on the airbag system related to the Driver Knee Bolster Squib Circuit Open code?

- It is crucial to disconnect the vehicle's battery and wait for a specified amount of time before working on the airbag system to avoid accidental deployment and ensure safety.

7. Is it possible to reset the B1B12 OBDII code in a Dodge without fixing the underlying issue?

- While it is possible to clear the fault code using an OBDII scanner, the code is likely to reappear until the root cause of the problem is addressed and resolved.

8. Can a DIY enthusiast with basic automotive knowledge fix the Driver Knee Bolster Squib Circuit Open problem?

- Depending on the specific cause of the issue, some DIY enthusiasts with basic automotive knowledge may be able to address the problem, but complex repairs or diagnostics may require professional assistance.

9. How long does it typically take to repair the B1B12 code related to the Driver Knee Bolster Squib Circuit Open in a Dodge?

- The repair time can vary depending on the exact cause of the issue and the complexity of the repair process, but it may range from a few hours to a full day in some cases.

10. Are there any recalls or technical service bulletins related to the B1B12 OBDII code in Dodge vehicles?

- It is recommended to check with a Dodge dealership or manufacturer's website to see if there are any recalls or technical service bulletins related to the B1B12 code and the driver knee bolster squib circuit open issue.

Discuss the causes and fixes for B1B12 Dodge OBDII Code

Submit a New Comment

Code B1B12 Dodge comments

No comments found for this page.