B1B0C Chrysler Code - Passenger Airbag Squib 2 Circuit Low
Quick Answer
The B1B0C Chrysler code refers to an issue with the Passenger Airbag Squib 2 Circuit being detected as low. Common causes include Faulty Passenger Airbag Squib, Damaged wiring or connectors in the circuit, Blown fuse related to the airbag system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B0C Chrysler indicates Passenger Airbag Squib 2 Circuit Low.
- Common causes
- Common causes include Faulty Passenger Airbag Squib, Damaged wiring or connectors in the circuit, Blown fuse related to the airbag system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1B0C Chrysler Description
The B1B0C Chrysler code refers to an issue with the Passenger Airbag Squib 2 Circuit being detected as low. The Passenger Airbag Squib is a component of the airbag system responsible for deploying the airbag in the event of a collision. When this circuit is detected as low, it means that there is an electrical problem with the circuit that may prevent the airbag from deploying properly in the event of an accident. This can pose a serious safety risk to the vehicle occupants as the airbag may not provide the necessary protection in a crash.
Common Causes of B1B0C Chrysler
- Faulty Passenger Airbag Squib
- Damaged wiring or connectors in the circuit
- Blown fuse related to the airbag system
- Malfunctioning airbag control module
- Corrosion or poor connections in the circuit
Symptoms of B1B0C Chrysler
- Airbag warning light on the dashboard
- Inability to turn off the passenger airbag
- Faulty airbag deployment in a crash
- Loss of communication with the airbag system
- Vehicle failing airbag system self-test
How to Fix B1B0C Chrysler
- Diagnose the issue by using a scan tool to read the fault codes and pinpoint the exact cause of the problem.
- Inspect the wiring and connectors in the Passenger Airbag Squib 2 Circuit for any damage or corrosion. Repair or replace as needed.
- Check the fuse related to the airbag system and replace if blown.
- Test the Passenger Airbag Squib for proper functionality and replace if necessary.
- Clear the fault codes and perform a test to ensure the issue has been resolved.
Cost to Fix B1B0C Chrysler
The cost of repairing a Passenger Airbag Squib 2 Circuit Low issue can vary depending on the specific cause of the problem and the labor rates in your area. On average, the cost of parts for this repair can range from $100 to $300, while the labor cost can range from $150 to $300. Overall, you can expect to pay anywhere from $250 to $600 for this repair. Keep in mind that these are rough estimates, and actual costs may vary based on your location and the specific circumstances of your vehicle. It is recommended to obtain quotes from local auto repair shops to get a more accurate cost estimate.
When is the Code Detected?
Need more information about the B1B0C Chrysler code?
Need more information on how to fix the B1B0C Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B0C Chrysler code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B0C Chrysler Code
1. What does the OBDII code B1B0C mean for Chrysler vehicles?
The B1B0C code indicates a "Passenger Airbag Squib 2 Circuit Low," meaning there’s an issue with the electrical circuit responsible for deploying the passenger airbag.
2. What are the symptoms of the B1B0C code?
Common symptoms include an illuminated airbag warning light on the dashboard and the potential failure of the passenger airbag to deploy in an accident.
3. What causes the B1B0C code to appear?
The code can be caused by a damaged or corroded airbag wiring harness, a faulty clock spring, a defective passenger airbag module, or poor electrical connections.
4. Can I drive my Chrysler with the B1B0C code active?
While the vehicle may still run, it’s not safe to drive with this code because the passenger airbag may not deploy in an accident, increasing the risk of injury.
5. How do I diagnose the B1B0C code?
Diagnosis involves using an OBDII scanner to confirm the code, inspecting the wiring and connectors for damage, and testing the clock spring and passenger airbag module for faults.
6. How do I fix the B1B0C code?
Repairs may include replacing damaged wiring, repairing corroded connectors, replacing the clock spring, or replacing the passenger airbag module if it’s defective.
7. How much does it cost to repair the B1B0C code?
Repair costs vary, but wiring repairs may cost $50–$200, while replacing the clock spring or airbag module can range from $300–$1,000 depending on parts and labor.
8. Can a weak battery cause the B1B0C code to appear?
Yes, a weak or failing battery can cause voltage drops that may trigger airbag-related codes, including B1B0C.
9. Is the B1B0C code specific to Chrysler vehicles?
While the code format is standardized, the specific meaning of B1B0C ("Passenger Airbag Squib 2 Circuit Low") is most commonly associated with Chrysler vehicles.
10. Do I need to reset the airbag system after fixing the B1B0C code?
Yes, after repairs, you’ll need to clear the code using an OBDII scanner and verify that the airbag warning light stays off during a test drive.
Discuss the causes and fixes for B1B0C Chrysler OBDII Code
Code B1B0C Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.