B19B1 Dodge Code - Right Power Sliding Door Control Circuit 2 High
Quick Answer
The B19B1 diagnostic trouble code (DTC) is specific to Dodge vehicles and indicates a fault in the right power sliding door control circuit, specifically that the circuit is reporting a high voltage condition. Common causes include Faulty door motor or actuator that is unable to respond to control signals, Damaged or corroded wiring in the control circuit, leading to high voltage readings, A malfunctioning door control module that misinterprets signals or fails to communicate properly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19B1 Dodge indicates Right Power Sliding Door Control Circuit 2 High.
- Common causes
- Common causes include Faulty door motor or actuator that is unable to respond to control signals, Damaged or corroded wiring in the control circuit, leading to high voltage readings, A malfunctioning door control module that misinterprets signals or fails to communicate properly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B19B1 Dodge Description
The B19B1 diagnostic trouble code (DTC) is specific to Dodge vehicles and indicates a fault in the right power sliding door control circuit, specifically that the circuit is reporting a high voltage condition. This code is triggered when the vehicle's onboard diagnostic system detects that the voltage in the control circuit exceeds the manufacturer's specified threshold, which can lead to improper operation of the power sliding door.
Common Causes of B19B1 Dodge
- Faulty door motor or actuator that is unable to respond to control signals.
- Damaged or corroded wiring in the control circuit, leading to high voltage readings.
- A malfunctioning door control module that misinterprets signals or fails to communicate properly.
- Poor ground connections that can cause voltage fluctuations in the circuit.
- Obstructions or mechanical failures in the door's track or hinges that may affect its operation.
Symptoms of B19B1 Dodge
- The right power sliding door fails to open or close completely.
- The door operates erratically, opening or closing on its own.
- Warning lights or alerts on the dashboard related to the sliding door system.
- Unusual noises, such as grinding or clicking, when attempting to operate the door.
- Inability to control the door using the remote or interior switches.
How to Fix B19B1 Dodge
- Visual Inspection: Begin by inspecting the wiring harness and connectors for any visible damage, corrosion, or loose connections that could contribute to the high voltage condition.
- Test Voltage Levels: Use a multimeter to check the voltage levels in the control circuit. Compare the readings with the manufacturer's specifications to confirm the high voltage issue.
- Check the Door Motor: Test the power sliding door motor for proper operation. If the motor is found to be faulty, it may need to be replaced.
- Inspect Control Module: If the wiring and motor are functioning correctly, the door control module should be tested for faults. Reprogramming or replacing the module may be necessary.
- Repair or Replace Components: Based on the findings from the previous steps, repair any damaged wiring, replace the door motor or control module as needed, and ensure all connections are secure.
Cost to Fix B19B1 Dodge
The cost to repair the B19B1 code can vary significantly based on the specific issue identified during diagnosis. On average, the total repair costs may range from $150 to $600. This estimate includes parts such as a new door motor or control module, which can cost between $100 and $300, and labor costs that typically range from $80 to $150 per hour. Diagnosis time can vary, but most shops will spend about 1 to 2 hours troubleshooting the issue. It's important to note that labor rates can differ based on location, vehicle make and model, and engine type. Rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less. Therefore, it is advisable to check local rates for a more precise estimate.
Need more information about the B19B1 Dodge code?
Need more information on how to fix the B19B1 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19B1 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B19B1 Dodge Code
1. What are the common symptoms of OBDII code B19B1 in a Dodge related to the Right Power Sliding Door Control Circuit 2 High?
- Common symptoms may include the right power sliding door not operating correctly, intermittent power door operation, or a warning light on the dashboard.
2. What are the possible causes of OBDII code B19B1 in a Dodge regarding the Right Power Sliding Door Control Circuit 2 High?
- Possible causes may include a faulty power sliding door control module, damaged wiring or connectors, or an issue with the door motor itself.
3. How can I diagnose the OBDII code B19B1 in a Dodge affecting the Right Power Sliding Door Control Circuit 2 High?
- Diagnosis typically involves using a scan tool to read the code, checking the wiring and connectors for damage, and testing the power sliding door control module.
4. Can I still use the power sliding door if OBDII code B19B1 is triggered in a Dodge?
- It is not recommended to continue using the power sliding door if this code is triggered, as it may lead to further damage or safety concerns.
5. What are some repair tips for resolving OBDII code B19B1 in a Dodge related to the Right Power Sliding Door Control Circuit 2 High?
- Repair tips may include checking and repairing any damaged wiring, replacing the power sliding door control module if necessary, and ensuring all connections are secure.
6. Is it safe to drive the vehicle with OBDII code B19B1 present in a Dodge with a power sliding door issue?
- It is best to address the issue promptly and avoid using the power sliding door until the problem is resolved to prevent any potential safety hazards.
7. How much does it typically cost to repair OBDII code B19B1 in a Dodge involving the Right Power Sliding Door Control Circuit 2 High?
- Repair costs can vary depending on the exact cause of the issue, but typically involve diagnostic fees, replacement parts, and labor costs.
8. Can resetting the OBDII system clear the B19B1 code in a Dodge with a power sliding door problem?
- Resetting the OBDII system may temporarily clear the code, but it is important to address the underlying issue causing the code to prevent it from reoccurring.
9. Are there any recalls or technical service bulletins related to OBDII code B19B1 in Dodge vehicles with power sliding doors?
- It is recommended to check with the manufacturer or authorized dealerships for any relevant recalls or technical service bulletins related to this specific OBDII code.
10. How can I prevent OBDII code B19B1 from appearing again in my Dodge with a power sliding door issue?
- Regular maintenance, checking for any signs of wear or damage, and addressing any power sliding door issues promptly can help prevent the recurrence of this OBDII code.
Discuss the causes and fixes for B19B1 Dodge OBDII Code
Code B19B1 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.