Engine-CodesScion – B19A7 Scion

B19A7 Scion Code - Short To Ground In Front Active Headrest Squib LH Circuit

Quick Answer

The B19A7 diagnostic trouble code for Scion vehicles indicates a "Short To Ground In Front Active Headrest Squib LH Circuit." This code specifically points to a problem with the front active headrest squib on the left-hand side of the vehicle. Common causes include Wiring harness damage or wear, Faulty front active headrest squib LH, Corrosion in the electrical connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B19A7 Scion indicates Short To Ground In Front Active Headrest Squib LH Circuit.
Common causes
Common causes include Wiring harness damage or wear, Faulty front active headrest squib LH, Corrosion in the electrical connections.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 14, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B19A7 Scion Description

The B19A7 diagnostic trouble code for Scion vehicles indicates a "Short To Ground In Front Active Headrest Squib LH Circuit." This code specifically points to a problem with the front active headrest squib on the left-hand side of the vehicle. The squib is a component of the supplemental restraint system (SRS) that is responsible for deploying the headrest in the event of a collision to minimize the risk of neck injuries.

OBDII Code B19A7 Scion - Short To Ground In Front Active Headrest Squib LH Circuit
B19A7 Scion Code - Short To Ground In Front Active Headrest Squib LH Circuit

Common Causes of B19A7 Scion

  1. Wiring harness damage or wear.
  2. Faulty front active headrest squib LH.
  3. Corrosion in the electrical connections.
  4. Poor grounding of the squib circuit.
  5. Impact or collision causing physical damage to the squib or wiring.

Symptoms of B19A7 Scion

  1. Airbag warning light illuminated on the dashboard.
  2. Headrest not deploying during a collision.
  3. Intermittent or non-functional headrest adjustment.
  4. SRS system fault codes stored in the vehicle's computer.

How to Fix B19A7 Scion

  1. Begin by disconnecting the vehicle's battery to prevent accidental deployment of the SRS system.
  2. Inspect the wiring harness for any visible damage, wear, or corrosion. Repair or replace any damaged wiring.
  3. Check the front active headrest squib LH for proper functionality. Replace if necessary.
  4. Test the circuit for proper grounding and repair any faulty connections.
  5. Clear the SRS system codes and perform a test to ensure the issue has been resolved before reconnecting the battery.

Cost to Fix B19A7 Scion

The cost of repairing a short to ground in the front active headrest squib LH circuit can vary depending on the extent of the damage and the specific components that need to be replaced. In general, the parts for this repair can range from $100 to $300, while labor costs can add another $100 to $200. Overall, the total repair cost for this issue typically falls between $200 and $500. However, it's important to note that these estimates are rough averages and actual costs may vary based on factors such as location, vehicle model, and labor rates at the repair shop. It's advisable to consult with a qualified mechanic or repair shop for a more accurate cost estimate.

Need more information about the B19A7 Scion code?

Need more information on how to fix the B19A7 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B19A7 Scion code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B19A7 Scion Code

1. What are the common symptoms of OBDII code B19A7 in a Scion related to a short to ground in the front active headrest squib LH circuit?

- Common symptoms may include illuminated airbag warning light on the dashboard, inoperative front active headrest, and potential issues with the airbag system.

2. What are the possible causes of OBDII code B19A7 indicating a short to ground in the front active headrest squib LH circuit in a Scion?

- The code B19A7 may be triggered by a damaged wiring harness, a faulty front active headrest squib LH unit, or a short circuit in the airbag system.

3. How can I diagnose the cause of OBDII code B19A7 in my Scion related to the front active headrest squib LH circuit short to ground?

- Proper diagnostic steps include inspecting the wiring harness for damage, testing the front active headrest squib LH unit for continuity, and using a multimeter to check for short circuits.

4. Is it safe to continue driving my Scion with OBDII code B19A7 indicating a short to ground in the front active headrest squib LH circuit?

- It is not recommended to drive the vehicle with unresolved airbag system issues, as it may compromise the safety of the occupants in the event of a collision.

5. Can I repair OBDII code B19A7 related to the front active headrest squib LH circuit short to ground in my Scion myself?

- Repairing the issue yourself is not recommended unless you have experience working with automotive electrical systems and airbag components. It is best to seek professional help for proper diagnosis and repair.

6. How much does it typically cost to repair OBDII code B19A7 indicating a short to ground in the front active headrest squib LH circuit in a Scion?

- The cost of repair can vary depending on the root cause of the issue, but it may involve replacing the front active headrest squib LH unit, repairing the wiring harness, and resetting the airbag system, which can range from a few hundred to over a thousand dollars.

7. Can resetting the OBDII code B19A7 related to the front active headrest squib LH circuit short to ground clear the issue temporarily?

- Clearing the code may temporarily turn off the warning light, but if the underlying issue causing the short to ground is not addressed, the code is likely to reappear, and the problem will persist.

8. How long does it typically take to repair OBDII code B19A7 in a Scion caused by a short to ground in the front active headrest squib LH circuit?

- The repair time can vary depending on the complexity of the issue, availability of parts, and the expertise of the technician, but it may take a few hours to a full day to diagnose and resolve the problem.

9. Are there any recalls or technical service bulletins related to OBDII code B19A7 in Scion vehicles with a front active headrest squib LH circuit short to ground issue?

- It is recommended to check with the manufacturer or authorized dealerships for any recalls or technical service bulletins related to this specific OBDII code to see if there are any known issues or remedies provided by the manufacturer.

10. Can a faulty front active headrest squib LH unit cause other issues in my Scion besides triggering OBDII code B19A7 indicating a short to ground in the circuit?

- A faulty front active headrest squib LH unit can potentially affect the overall functionality of the airbag system in the vehicle, compromising the safety features designed to protect occupants in the event of a collision.

Discuss the causes and fixes for B19A7 Scion OBDII Code

Code B19A7 Scion comments

No comments found for this page.