B1995 Lincoln Code - Driver Side Side Mount Airbag Low Resistance On Squib
Quick Answer
The B1995 diagnostic trouble code for Lincoln vehicles indicates a problem with the driver side side mount airbag's low resistance on the squib. Common causes include Damaged wiring or connectors in the airbag system, Faulty driver side side mount airbag squib, Issues with the airbag control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1995 Lincoln indicates Driver Side Side Mount Airbag Low Resistance On Squib.
- Common causes
- Common causes include Damaged wiring or connectors in the airbag system, Faulty driver side side mount airbag squib, Issues with the airbag control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1995 Lincoln Description
The B1995 diagnostic trouble code for Lincoln vehicles indicates a problem with the driver side side mount airbag's low resistance on the squib. The squib is essentially an electrical component within the airbag system that helps deploy the airbag in case of a collision. When the resistance on the squib is too low, it can prevent the airbag from deploying properly or at all, compromising the safety of the driver in the event of an accident.
Common Causes of B1995 Lincoln
- Damaged wiring or connectors in the airbag system.
- Faulty driver side side mount airbag squib.
- Issues with the airbag control module.
- Corrosion or poor connections in the airbag system.
- Impact or collision that may have damaged the airbag components.
Symptoms of B1995 Lincoln
- Airbag warning light illuminated on the dashboard.
- Inability to turn off the airbag warning light even after resetting.
- Diagnostic trouble code B1995 stored in the vehicle's computer system.
- Driver side airbag may not deploy in a collision.
How to Fix B1995 Lincoln
- Begin by diagnosing the specific cause of the low resistance on the driver side side mount airbag squib using a diagnostic scanner.
- Inspect the wiring and connectors in the airbag system for any damage or corrosion. Repair or replace as needed.
- Test the driver side side mount airbag squib for proper resistance and functionality. Replace if found to be faulty.
- Check the airbag control module for any faults or errors. Reset or replace the module if necessary.
- Clear the diagnostic trouble code B1995 from the vehicle's computer system and test the airbag system to ensure proper deployment.
Cost to Fix B1995 Lincoln
The typical repair costs for addressing a B1995 diagnostic trouble code on a Lincoln vehicle can range from $200 to $500, depending on the specific cause of the issue and the cost of parts and labor. It's important to note that diagnosis time and labor rates at auto repair shops can vary, with hourly rates typically ranging between $80 and $150. Factors such as location, vehicle make and model, and engine type can also impact the overall repair costs. For a more accurate estimate, it is recommended to consult with a local auto repair shop.
Need more information about the B1995 Lincoln code?
Need more information on how to fix the B1995 Lincoln code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1995 Lincoln code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1995 Lincoln Code
1. What are the common symptoms of OBDII code B1995 in a Lincoln indicating Driver Side Side Mount Airbag Low Resistance On Squib?
- Common symptoms include the airbag warning light staying illuminated on the dashboard and potential failure of the driver side airbag system.
2. What are the possible causes of OBDII code B1995 in a Lincoln?
- The code B1995 in a Lincoln may be triggered by issues such as a faulty side mount airbag squib, damaged wiring harness, or poor electrical connection.
3. How can I diagnose the OBDII code B1995 in my Lincoln related to Driver Side Side Mount Airbag Low Resistance On Squib?
- Diagnosis typically involves using an OBDII scanner to retrieve the code, inspecting the wiring and connections to the driver side airbag, and testing the resistance of the side mount airbag squib.
4. What are the recommended repair tips for addressing OBDII code B1995 in a Lincoln?
- Repair tips may include repairing or replacing damaged wiring, ensuring proper electrical connections, and replacing the driver side side mount airbag squib if necessary.
5. Can I reset the OBDII code B1995 in my Lincoln after addressing the issue with the Driver Side Side Mount Airbag Low Resistance On Squib?
- Yes, once the underlying issue causing the code B1995 is fixed, you can reset the code using an OBDII scanner to clear the fault code from the vehicle's system.
6. Is it safe to continue driving my Lincoln with OBDII code B1995 indicating Driver Side Side Mount Airbag Low Resistance On Squib?
- It is not recommended to drive the vehicle with an active airbag fault code like B1995, as it may compromise the proper functioning of the driver side airbag system in the event of an accident.
7. How much does it typically cost to repair OBDII code B1995 related to Driver Side Side Mount Airbag Low Resistance On Squib in a Lincoln?
- Repair costs can vary depending on the exact cause of the issue, but they may range from a few hundred to a thousand dollars, including parts and labor.
8. Are there any safety precautions I should take when working on the driver side airbag system to resolve OBDII code B1995 in my Lincoln?
- It is crucial to disconnect the vehicle's battery and wait for a period specified by the manufacturer before working on the airbag system to avoid accidental deployment.
9. Can a DIY enthusiast with some automotive knowledge fix the OBDII code B1995 related to Driver Side Side Mount Airbag Low Resistance On Squib in a Lincoln?
- While some DIYers may have the skills to diagnose and address wiring issues, working on the airbag system is complex and potentially dangerous, so it's recommended to seek professional help.
10. How often does OBDII code B1995 indicating Driver Side Side Mount Airbag Low Resistance On Squib occur in Lincoln vehicles?
- The occurrence of code B1995 can vary, but it is relatively common in Lincoln vehicles with driver side airbag system issues, particularly in older models or those with high mileage.
Discuss the causes and fixes for B1995 Lincoln OBDII Code
Code B1995 Lincoln comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.