Engine-Codes.com
Engine-Codes – Lincoln – B1993 Lincoln

B1993 Lincoln Code - Driver Side Side Mount Airbag Circuit Short To Ground

Quick Answer

The B1993 diagnostic trouble code for Lincoln vehicles indicates a problem with the driver side side mount airbag circuit short to ground. Common causes include Wiring damage or corrosion in the driver side side mount airbag circuit, Faulty airbag module or sensor, Loose or damaged connectors in the airbag circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1993 Lincoln indicates Driver Side Side Mount Airbag Circuit Short To Ground.
Common causes
Common causes include Wiring damage or corrosion in the driver side side mount airbag circuit, Faulty airbag module or sensor, Loose or damaged connectors in the airbag circuit.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 17, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B1993 Lincoln Description

The B1993 diagnostic trouble code for Lincoln vehicles indicates a problem with the driver side side mount airbag circuit short to ground. This means that there is an electrical issue in the circuit that controls the deployment of the driver side airbag mounted on the side of the seat. The airbag system is a crucial safety feature in modern vehicles, designed to deploy in the event of a collision to protect the driver from serious injury. A short to ground in the circuit can prevent the airbag from deploying when needed, compromising the safety of the driver in the event of an accident.

OBDII Code B1993 Lincoln - Driver Side Side Mount Airbag Circuit Short To Ground
B1993 Lincoln Code - Driver Side Side Mount Airbag Circuit Short To Ground

Common Causes of B1993 Lincoln

  1. Wiring damage or corrosion in the driver side side mount airbag circuit.
  2. Faulty airbag module or sensor.
  3. Loose or damaged connectors in the airbag circuit.
  4. Electrical short to ground in the circuit.
  5. Impact or collision that damaged the airbag system components.

Symptoms of B1993 Lincoln

  1. Airbag warning light illuminated on the dashboard.
  2. Loss of functionality of the driver side airbag.
  3. Inability to pass a vehicle safety inspection.
  4. Error code stored in the vehicle's computer system.

How to Fix B1993 Lincoln

  1. Begin by disconnecting the vehicle's battery to prevent accidental deployment of the airbag system.
  2. Inspect the wiring and connectors in the driver side side mount airbag circuit for damage or corrosion. Repair or replace any damaged components.
  3. Check the airbag module and sensor for faults. Replace if necessary.
  4. Clear the error code from the vehicle's computer system using a diagnostic scanner.
  5. Reconnect the battery and test the airbag system to ensure proper functionality.

Cost to Fix B1993 Lincoln

The cost of repairing a driver side side mount airbag circuit short to ground can vary depending on the specific cause of the issue and the labor rates at the auto repair shop. In general, the cost of parts for this repair can range from $200 to $500, with labor costs adding an additional $100 to $200. Overall, the total repair cost can be estimated to be between $300 and $700. It is advisable to check with local auto repair shops for more accurate pricing based on your location and vehicle model.

Need more information about the B1993 Lincoln code?

Need more information on how to fix the B1993 Lincoln code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1993 Lincoln code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1993 Lincoln Code

1. What does OBDII code B1993 mean on a Lincoln?

Code B1993 indicates a short to ground in the driver-side side mount airbag circuit, which can prevent the airbag from deploying properly in a collision.

2. What are the common symptoms of code B1993?

The airbag warning light will illuminate, and the airbags on the driver’s side may not function properly in an accident.

3. What causes the B1993 code to appear?

Common causes include damaged wiring, a shorted or corroded electrical connector, a faulty airbag module, or issues with the clock spring.

4. Is it safe to drive with a B1993 code?

Driving with a B1993 code is not recommended as the airbag system may be compromised, reducing safety in the event of a collision.

5. How can I diagnose the B1993 code?

Start by inspecting the wiring and connectors for damage or corrosion, check the clock spring for faults, and use a scan tool to verify the fault and reset the code after repairs.

6. Can a damaged clock spring cause the B1993 code?

Yes, a damaged or faulty clock spring can cause a short in the airbag circuit, leading to the B1993 code.

7. How much does it cost to fix a B1993 code?

Repair costs vary depending on the issue, but addressing damaged wiring or connectors may cost $100-$200, while replacing a clock spring or airbag module could cost several hundred dollars.

8. Can the B1993 code be caused by water damage?

Yes, water intrusion can corrode connectors or wiring, creating a short to ground in the airbag circuit.

9. Do I need a professional to fix the B1993 code?

While basic inspections can be done at home, repairs involving the airbag system are best handled by a qualified technician to ensure safety.

10. Will clearing the B1993 code with a scan tool fix the issue?

No, simply clearing the code will not fix the underlying issue. The root cause of the short to ground must be addressed to prevent the code from returning.

Discuss the causes and fixes for B1993 Lincoln OBDII Code

Submit a New Comment

Code B1993 Lincoln comments

No comments found for this page.