Engine-Codes.com
Engine-Codes – Jeep – B1992 Jeep

B1992 Jeep Code - Right Power Sliding Door Sensor Supply Circuit High

Quick Answer

The B1992 diagnostic trouble code (DTC) specifically pertains to the right power sliding door sensor supply circuit in Jeep vehicles. Common causes include A short circuit in the wiring harness related to the right power sliding door sensor, A malfunctioning or defective right power sliding door sensor, Corrosion or damage to the electrical connectors associated with the door mechanism. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1992 Jeep indicates Right Power Sliding Door Sensor Supply Circuit High.
Common causes
Common causes include A short circuit in the wiring harness related to the right power sliding door sensor, A malfunctioning or defective right power sliding door sensor, Corrosion or damage to the electrical connectors associated with the door mechanism.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Oct 18, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B1992 Jeep Description

The B1992 diagnostic trouble code (DTC) specifically pertains to the right power sliding door sensor supply circuit in Jeep vehicles. This code indicates that the voltage level in the sensor supply circuit for the right sliding door is higher than expected. The power sliding doors are designed to provide convenience for passengers, allowing for easy access to the rear seating area. The sensor circuit is crucial for the operation of these doors, as it monitors the position and functionality of the door mechanism.

OBDII Code B1992 Jeep - Right Power Sliding Door Sensor Supply Circuit High
B1992 Jeep Code - Right Power Sliding Door Sensor Supply Circuit High

Common Causes of B1992 Jeep

  1. A short circuit in the wiring harness related to the right power sliding door sensor.
  2. A malfunctioning or defective right power sliding door sensor.
  3. Corrosion or damage to the electrical connectors associated with the door mechanism.
  4. Faulty door control module that fails to interpret the sensor signals correctly.
  5. Issues with the vehicle's body control module (BCM) that affect the operation of the sliding door.

Symptoms of B1992 Jeep

  1. The right power sliding door does not open or close properly.
  2. The power sliding door may operate intermittently or fail to respond to the control switch.
  3. Warning lights may illuminate on the dashboard, indicating a fault in the door system.
  4. Unusual noises may be heard when attempting to operate the sliding door.
  5. The door may not latch securely, leading to safety concerns while driving.

How to Fix B1992 Jeep

  1. Diagnostic Testing: Begin by using an OBD-II scanner to confirm the B1992 code and check for any additional codes that may provide further insight into the issue.
  2. Visual Inspection: Inspect the wiring harness and connectors for signs of wear, corrosion, or damage. Pay special attention to the connections at the right sliding door and the door control module.
  3. Sensor Testing: Test the right power sliding door sensor using a multimeter to ensure it is functioning within the specified voltage range. Replace the sensor if it is found to be defective.
  4. Repair or Replace Wiring: If any damaged wires or connectors are identified, repair or replace them to restore proper electrical connectivity.
  5. Module Reprogramming or Replacement: If the door control module is suspected to be faulty, it may need to be reprogrammed or replaced, depending on the extent of the issue.

Cost to Fix B1992 Jeep

The typical repair costs for addressing the B1992 code can vary widely based on the specific diagnosis and the parts required. On average, you might expect to pay between $200 and $600 for parts and labor combined. This estimate includes the cost of a new sensor, any wiring repairs, and labor charges. Keep in mind that labor rates at auto repair shops can differ based on location, vehicle make and model, and engine type. Most shops charge between $80 and $150 per hour; however, rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less. It's advisable to check local rates for a more precise estimate.

Need more information about the B1992 Jeep code?

Need more information on how to fix the B1992 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1992 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1992 Jeep Code

1. What are the common symptoms of OBDII code B1992 in a Jeep related to the Right Power Sliding Door Sensor Supply Circuit High?

- The common symptoms include the right power sliding door not operating properly, intermittent issues with opening or closing, or the door getting stuck.

2. What could be causing the OBDII code B1992 in a Jeep for the Right Power Sliding Door Sensor Supply Circuit High?

- The code B1992 may be triggered by a malfunction in the sensor supply circuit, a fault in the power sliding door control module, wiring issues, or a sensor failure.

3. How can I diagnose the OBDII code B1992 in a Jeep for the Right Power Sliding Door Sensor Supply Circuit High?

- Diagnosis involves checking the wiring connections for any damage, testing the sensor and control module for proper functionality, and using a scan tool to retrieve specific error codes.

4. Are there any simple repairs I can try for the OBDII code B1992 in a Jeep related to the Right Power Sliding Door Sensor Supply Circuit High?

- You can start by inspecting and cleaning the sensor connections, checking and repairing any damaged wiring, and resetting the power sliding door system to see if the issue resolves.

5. Is it safe to continue driving with the OBDII code B1992 for the Right Power Sliding Door Sensor Supply Circuit High in a Jeep?

- It is not recommended to drive with this code as it may lead to further door operation issues or potential safety hazards. It's best to address the problem promptly.

6. Can a DIY enthusiast fix the OBDII code B1992 for the Right Power Sliding Door Sensor Supply Circuit High in a Jeep?

- Depending on your experience and tools available, some simple repairs like checking connections and cleaning sensors can be done at home. However, more complex issues may require professional assistance.

7. How much does it typically cost to repair the OBDII code B1992 in a Jeep for the Right Power Sliding Door Sensor Supply Circuit High?

- Repair costs can vary based on the exact cause of the issue, but they may range from a few hundred to a thousand dollars, including parts and labor.

8. Can extreme weather conditions affect the occurrence of the OBDII code B1992 in a Jeep for the Right Power Sliding Door Sensor Supply Circuit High?

- Yes, extreme temperatures or moisture can impact the sensor's performance and wiring connections, potentially leading to the triggering of the B1992 fault code.

9. Will resetting the OBDII code B1992 in a Jeep for the Right Power Sliding Door Sensor Supply Circuit High fix the issue permanently?

- Resetting the code may temporarily clear the error, but if the underlying problem like a faulty sensor or wiring issue persists, the code is likely to reappear. A thorough diagnosis and repair are necessary for a permanent fix.

10. What steps should be taken if the OBDII code B1992 keeps coming back in a Jeep for the Right Power Sliding Door Sensor Supply Circuit High?

- If the code keeps reappearing after resetting, it's essential to conduct a detailed inspection of the sensor circuit, control module, and wiring to pinpoint and address the root cause of the issue. Consulting a professional mechanic might be necessary for a comprehensive solution.

Discuss the causes and fixes for B1992 Jeep OBDII Code

Submit a New Comment

Code B1992 Jeep comments

No comments found for this page.