B1989 Code - Pedal Position Rearward Switch Circuit Short to Battery
Quick Answer
The B1989 diagnostic trouble code (DTC) indicates a problem with the Pedal Position Rearward Switch Circuit being shorted to the battery. Common causes include Damaged wiring harness, Faulty pedal position sensor, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1989 indicates Pedal Position Rearward Switch Circuit Short to Battery.
- Common causes
- Common causes include Damaged wiring harness, Faulty pedal position sensor, Malfunctioning ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1989 Description
The B1989 diagnostic trouble code (DTC) indicates a problem with the Pedal Position Rearward Switch Circuit being shorted to the battery. This code is typically found in vehicles with electronic throttle control systems. The pedal position sensor is responsible for detecting the position of the accelerator pedal and transmitting this information to the engine control module (ECM) to adjust the throttle accordingly. When the circuit is shorted to the battery, it means that there is an unintended connection that is causing an abnormal flow of current.
Common Causes of B1989
- Damaged wiring harness
- Faulty pedal position sensor
- Malfunctioning ECM
- Short circuit in the system
- Corrosion or poor connections in the circuit
Symptoms of B1989
- Erratic acceleration
- Stalling or loss of power
- Limited throttle response
- Check Engine Light illuminated
- Failsafe mode activated
How to Fix B1989
- Begin by conducting a thorough visual inspection of the wiring harness and connections for any signs of damage or corrosion.
- Test the pedal position sensor using a multimeter to check for proper resistance values and signal output.
- Check the ECM for any fault codes related to the pedal position sensor and perform a diagnostic scan to further pinpoint the issue.
- Repair or replace any damaged wiring harnesses or connectors.
- Replace the pedal position sensor if it is found to be faulty, and recalibrate the system as needed.
Cost to Fix B1989
The typical repair costs for addressing a B1989 code can range from $150 to $500, depending on the specific cause of the issue and the cost of parts and labor in your area. Keep in mind that additional diagnostic time may be required to accurately identify the problem, and labor rates can vary based on the complexity of the repair. It is advisable to consult with a professional mechanic to get a more accurate estimate based on your vehicle's make and model.
Need more information about the B1989 code?
Need more information on how to fix the B1989 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1989 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1989 Code
1. What are the common symptoms of OBDII code B1989 (Pedal Position Rearward Switch Circuit Short to Battery)?
- Common symptoms include the check engine light being illuminated, issues with the throttle response, and potential stalling of the vehicle.
2. What does the OBDII code B1989 indicate?
- OBDII code B1989 indicates a fault in the circuit related to the pedal position rearward switch being shorted to the battery.
3. What are the possible causes of OBDII code B1989?
- Possible causes include damaged wiring or connectors in the pedal position sensor circuit, a faulty pedal position sensor, or a short circuit to the battery.
4. How can I diagnose the issue related to OBDII code B1989?
- A thorough inspection of the wiring and connectors in the pedal position sensor circuit, testing the sensor itself, and checking for any short circuits can help diagnose the issue.
5. Can I drive my vehicle with OBDII code B1989 present?
- It is not recommended to drive your vehicle with this code present as it can lead to performance issues and potential safety concerns.
6. How can I repair OBDII code B1989?
- Repairing this code may involve repairing or replacing damaged wiring or connectors, replacing the pedal position sensor, and clearing the code with a diagnostic tool.
7. Is it safe to continue driving my vehicle if the check engine light is on due to OBDII code B1989?
- It is best to address the issue promptly to avoid any potential safety hazards or further damage to the vehicle.
8. Can OBDII code B1989 cause other problems in my vehicle?
- Yes, if left unresolved, this code can lead to issues with throttle response, engine performance, and overall drivability of the vehicle.
9. How long does it typically take to repair OBDII code B1989?
- The time needed for repairs can vary depending on the exact cause of the issue, but it is recommended to have it addressed as soon as possible.
10. Is it necessary to visit a mechanic for OBDII code B1989, or can I fix it myself?
- While some DIY enthusiasts may be able to address the issue, it is recommended to have a professional mechanic diagnose and repair OBDII code B1989 for accurate and reliable results.
Discuss the causes and fixes for B1989 OBDII Code
Code B1989 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.