B1987 Jeep Code - Left Power Sliding Door Switch Stuck
Quick Answer
The B1987 diagnostic trouble code (DTC) for Jeep vehicles indicates that the left power sliding door switch is stuck. Common causes include Accumulation of dirt, debris, or moisture in the power sliding door switch, causing it to get stuck, Wear and tear on the switch mechanism due to frequent use, Electrical issues such as a faulty wiring connection or short circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1987 Jeep indicates Left Power Sliding Door Switch Stuck.
- Common causes
- Common causes include Accumulation of dirt, debris, or moisture in the power sliding door switch, causing it to get stuck, Wear and tear on the switch mechanism due to frequent use, Electrical issues such as a faulty wiring connection or short circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1987 Jeep Description
The B1987 diagnostic trouble code (DTC) for Jeep vehicles indicates that the left power sliding door switch is stuck. This means that there is a malfunction in the switch that controls the operation of the power sliding door on the left side of the vehicle. The power sliding door switch is responsible for opening and closing the door electronically, allowing for convenient access to the vehicle's interior. When this switch gets stuck, it can prevent the door from operating properly, leading to inconvenience and potential safety hazards.
Common Causes of B1987 Jeep
- Accumulation of dirt, debris, or moisture in the power sliding door switch, causing it to get stuck.
- Wear and tear on the switch mechanism due to frequent use.
- Electrical issues such as a faulty wiring connection or short circuit.
- Impact or physical damage to the power sliding door switch.
- Corrosion or rust affecting the internal components of the switch.
Symptoms of B1987 Jeep
- Power sliding door fails to open or close when the switch is activated.
- Unusual noises or grinding sounds when attempting to operate the power sliding door.
- Inconsistent operation of the power sliding door, such as opening partially or getting stuck midway.
- Dashboard warning light indicating a fault with the power sliding door system.
How to Fix B1987 Jeep
- Begin by disconnecting the vehicle's battery to prevent any electrical mishaps during the repair process.
- Remove the trim panel or cover that houses the power sliding door switch to access the switch mechanism.
- Inspect the switch for any visible signs of damage, dirt, or corrosion. Clean the switch thoroughly with a suitable electrical contact cleaner.
- Check the wiring connections to the switch for any loose or damaged wires. Repair or replace any faulty connections as needed.
- Test the power sliding door switch after cleaning and reassembly to ensure proper functionality. Reconnect the battery and operate the door to verify that the issue has been resolved.
Cost to Fix B1987 Jeep
The typical repair costs for addressing a stuck left power sliding door switch on a Jeep vehicle can range from $100 to $300, depending on the extent of the damage and the specific parts needed for the repair. This estimate includes the cost of labor and any replacement components that may be required. It is important to note that the actual cost of the repair can vary based on factors such as the location of the auto repair shop, the make and model of the vehicle, and the expertise of the technician. Additionally, diagnostic time and labor rates at auto repair shops can range from $80 to $150 per hour, with rates potentially higher at dealerships or in metropolitan areas. It is recommended to obtain a detailed quote from a reputable auto repair shop to get a more accurate estimate for addressing this issue.
Need more information about the B1987 Jeep code?
Need more information on how to fix the B1987 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1987 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1987 Jeep Code
1. What does the OBDII code B1987 mean on a Jeep?
The code B1987 indicates that the left power sliding door switch is stuck, meaning the vehicle's control module has detected an issue with the switch's operation.
2. What are the common symptoms of code B1987 on a Jeep?
Symptoms include the left power sliding door not opening or closing properly, a stuck or unresponsive switch, and possibly a warning light or chime.
3. What causes the left power sliding door switch to get stuck?
Common causes include dirt or debris buildup in the switch, a mechanical issue within the door components, a faulty switch, or damaged wiring.
4. Can I still drive my Jeep with the B1987 code active?
Yes, you can drive the vehicle, but the functionality of the left power sliding door may be compromised, which could be inconvenient or pose a safety concern.
5. How do I diagnose the cause of the B1987 code?
Start by inspecting the left power sliding door switch for physical damage, debris, or wear. If the switch looks fine, check the wiring and electrical connections for faults.
6. How can I fix the B1987 code on my Jeep?
Cleaning or replacing the left power sliding door switch often resolves the issue. If the switch is functional, check for and repair any damaged wiring or connectors.
7. Do I need special tools to fix the B1987 code?
Basic tools like screwdrivers and a multimeter are often sufficient for diagnosing and repairing this issue. However, an OBDII scanner may help confirm the code and clear it after repairs.
8. Can a B1987 code be triggered by a software issue?
While rare, a software glitch in the vehicle's control module could potentially cause this code. A software update or reflash may be required in such cases.
9. How much does it typically cost to repair a B1987 code?
Costs may vary depending on the cause, but replacing the switch usually costs between $50 and $150 for parts, plus labor if done by a professional.
10. Can I prevent the B1987 code from occurring?
Regularly cleaning and inspecting the power sliding door switch and ensuring debris doesn’t accumulate around the door mechanism can help prevent this issue.
Discuss the causes and fixes for B1987 Jeep OBDII Code
Code B1987 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.