B1973 Chevrolet Code - High Power Control Fault
Quick Answer
The B1973 diagnostic trouble code (DTC) for Chevrolet vehicles indicates a high power control fault. Common causes include Faulty power control module (PCM), Wiring harness issues, Sensor malfunctions (e.g., throttle position sensor). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1973 Chevrolet indicates High Power Control Fault.
- Common causes
- Common causes include Faulty power control module (PCM), Wiring harness issues, Sensor malfunctions (e.g., throttle position sensor).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1973 Chevrolet Description
The B1973 diagnostic trouble code (DTC) for Chevrolet vehicles indicates a high power control fault. This code is typically associated with issues in the vehicle's power control module (PCM), which is responsible for managing various functions related to engine performance, emissions control, and overall vehicle operation. When this fault occurs, it can lead to a range of performance issues and potentially affect the vehicle's drivability.
Common Causes of B1973 Chevrolet
- Faulty power control module (PCM)
- Wiring harness issues
- Sensor malfunctions (e.g., throttle position sensor)
- Electrical system faults
- Software glitches in the PCM
Symptoms of B1973 Chevrolet
- Engine misfires or hesitation during acceleration
- Reduced fuel efficiency
- Illuminated check engine light
- Stalling or rough idling
- Loss of power while driving
How to Fix B1973 Chevrolet
- Perform a comprehensive diagnostic scan to retrieve the specific fault codes and pinpoint the issue.
- Inspect the wiring harness for any signs of damage or corrosion, and repair or replace as needed.
- Test and potentially replace any faulty sensors that may be contributing to the high power control fault.
- If the PCM is determined to be the root cause, it may need to be reprogrammed or replaced.
- Clear the fault codes and perform a test drive to ensure the issue has been resolved.
Cost to Fix B1973 Chevrolet
The cost of repairing a high power control fault can vary depending on the specific cause of the issue and the extent of the repairs needed. In general, the cost of parts and labor for this type of repair can range from $200 to $800 or more. It's important to note that diagnostic time and labor rates at auto repair shops can vary, so it's recommended to obtain a detailed estimate from a qualified technician based on the specific circumstances of your vehicle.
Need more information about the B1973 Chevrolet code?
Need more information on how to fix the B1973 Chevrolet code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1973 Chevrolet code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1973 Chevrolet Code
1. What does the OBDII code B1973 mean on a Chevrolet?
Code B1973 indicates a "High Power Control Fault," which typically points to an issue with a high-power control circuit or component in the vehicle, such as a relay or actuator.
2. What are the common symptoms of code B1973 in a Chevrolet?
Common symptoms include malfunctioning electrical components like headlights, power windows, or other high-power accessories, and possible warning lights on the dashboard.
3. What causes the B1973 fault code in a Chevrolet?
The code is usually caused by a faulty relay, damaged wiring, corroded connectors, or a failure in the control module responsible for managing high-power circuits.
4. Can I drive my Chevrolet with the B1973 fault code?
While the vehicle may still be drivable, the affected high-power components may not function properly and could compromise safety or convenience. It's best to address the issue promptly.
5. How do I diagnose the B1973 code on my Chevrolet?
Start by inspecting the affected circuit's wiring and connectors for damage or corrosion. Use a multimeter to check for proper voltage and continuity in the high-power control circuit.
6. What tools are needed to troubleshoot a B1973 code?
You'll need a diagnostic scanner capable of reading manufacturer-specific codes, a multimeter for electrical testing, and possibly a wiring diagram for your vehicle.
7. How can I fix the B1973 fault code on a Chevrolet?
Repairs may involve replacing a damaged relay, repairing or replacing faulty wiring or connectors, or reprogramming or replacing a malfunctioning control module.
8. Does clearing the B1973 code fix the problem?
Clearing the code will erase it temporarily, but if the underlying issue is not resolved, the code will reappear when the fault is detected again.
9. How much does it cost to repair a B1973 code on a Chevrolet?
Repair costs can vary widely depending on the root cause. Simple fixes like replacing a relay may cost $50-$100, while more complex issues like module replacement could cost several hundred dollars.
10. Can a B1973 code be caused by a dead battery?
A weak or dead battery might contribute to triggering this code if it causes voltage irregularities in the high-power control circuit. Ensure the battery and charging system are in good condition.
Discuss the causes and fixes for B1973 Chevrolet OBDII Code
Code B1973 Chevrolet comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.