B1942 Mercury Code - Left Front Impact Sensor Fee/Return Circuit Open
Quick Answer
The B1942 diagnostic trouble code for Mercury vehicles indicates that there is an issue with the left front impact sensor fee/return circuit being open. Common causes include Damaged wiring or connectors leading to the left front impact sensor, Corrosion or rust affecting the sensor's connections, Faulty left front impact sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1942 Mercury indicates Left Front Impact Sensor Fee/Return Circuit Open.
- Common causes
- Common causes include Damaged wiring or connectors leading to the left front impact sensor, Corrosion or rust affecting the sensor's connections, Faulty left front impact sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1942 Mercury Description
The B1942 diagnostic trouble code for Mercury vehicles indicates that there is an issue with the left front impact sensor fee/return circuit being open. Impact sensors are crucial components of a vehicle's safety system, as they are responsible for detecting collisions and deploying airbags to protect occupants. In the case of this specific code, the sensor on the left front side of the vehicle is not sending or receiving the necessary signals properly, which could potentially compromise the effectiveness of the airbag system in the event of a crash.
Common Causes of B1942 Mercury
- Damaged wiring or connectors leading to the left front impact sensor.
- Corrosion or rust affecting the sensor's connections.
- Faulty left front impact sensor.
- Issues with the airbag control module.
- Previous collision or impact causing damage to the sensor or wiring.
Symptoms of B1942 Mercury
- Airbag warning light illuminated on the dashboard.
- Inability to turn off the airbag system warning chime.
- Airbags not deploying in a collision.
- Erratic or inconsistent airbag deployment.
How to Fix B1942 Mercury
- Begin by diagnosing the specific cause of the issue using a diagnostic scanner to retrieve the trouble code and pinpoint the exact source of the problem.
- Inspect the wiring and connectors leading to the left front impact sensor for any signs of damage, corrosion, or loose connections. Repair or replace as needed.
- Test the left front impact sensor itself to determine if it is functioning correctly. Replace the sensor if it is found to be faulty.
- Check the airbag control module for any malfunctions or errors. Reset or replace the module if necessary.
- Clear the trouble code from the vehicle's system and perform a test drive to ensure that the issue has been resolved and the airbag system is functioning properly.
Cost to Fix B1942 Mercury
The cost of repairing a B1942 code related to the left front impact sensor fee/return circuit open can vary depending on the specific cause of the issue and the extent of the repairs needed. On average, the parts for this repair, including a new impact sensor and any necessary wiring or connectors, could range from $200 to $500. Labor costs at an auto repair shop could add an additional $100 to $300, depending on the shop's hourly rates and the complexity of the repair.
Need more information about the B1942 Mercury code?
Need more information on how to fix the B1942 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1942 Mercury code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1942 Mercury Code
1. What are the common symptoms of OBDII code B1942 in a Mercury vehicle?
- Common symptoms include the airbag warning light illuminating on the dashboard, potential loss of functionality of the airbag system, and diagnostic trouble code B1942 being stored in the vehicle's computer.
2. What does the OBDII code B1942 for a Left Front Impact Sensor Fee/Return Circuit Open in a Mercury mean?
- This code indicates an issue with the left front impact sensor circuit, specifically that the circuit is open or not functioning properly. The impact sensor is a crucial component of the vehicle's airbag system.
3. What are possible causes of the Left Front Impact Sensor Fee/Return Circuit Open code in a Mercury?
- Common causes include a damaged impact sensor, wiring harness issues, loose connections, corrosion in the circuit, or a faulty airbag control module.
4. How can I diagnose the source of the B1942 code in my Mercury?
- Diagnosis typically involves checking the wiring and connections related to the left front impact sensor, inspecting the sensor itself for damage, and using a diagnostic scanner to retrieve and interpret the trouble code.
5. What are the repair options for resolving OBDII code B1942 in a Mercury?
- Repair options may include repairing or replacing damaged wiring, ensuring proper connections, replacing the left front impact sensor if necessary, and clearing the trouble code from the vehicle's computer.
6. Is it safe to drive my Mercury with the B1942 code related to the Left Front Impact Sensor Fee/Return Circuit Open?
- It is not recommended to drive the vehicle with the B1942 code present, as it indicates a potential issue with the airbag system's functionality. This could compromise safety in the event of a collision.
7. Can I reset the B1942 trouble code in my Mercury without fixing the underlying issue?
- While you can clear the trouble code using a diagnostic scanner, it is important to address the underlying issue causing the code to prevent safety risks and ensure proper functioning of the airbag system.
8. How much does it typically cost to repair the Left Front Impact Sensor Fee/Return Circuit Open code in a Mercury?
- The cost of repair can vary depending on the exact cause of the issue, the need for parts replacement, and labor costs. It is advisable to consult a professional mechanic for an accurate estimate.
9. Are there any DIY tips for troubleshooting the B1942 code in my Mercury before seeking professional help?
- DIY tips may include visually inspecting the impact sensor and its wiring for damage, checking for loose connections, and ensuring proper grounding. However, complex electrical issues should be handled by a professional.
10. How often does the Left Front Impact Sensor Fee/Return Circuit Open code occur in Mercury vehicles?
- While not extremely common, this code can occur in Mercury vehicles due to various factors such as age, wear and tear, or environmental conditions. Regular maintenance and inspections can help prevent such issues.
Discuss the causes and fixes for B1942 Mercury OBDII Code
Code B1942 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.