B1940 2015 Toyota RAV4 Code - Short in Selectable Force Limiter Squib Right Circuit
Quick Answer
The B1940 code on a 2015 Toyota RAV4 indicates a short in the Selectable Force Limiter Squib Right Circuit. Common causes include Short circuit in the wiring harness, Faulty squib in the selectable force limiter, Corrosion or damage to the connectors in the circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1940 2015 Toyota RAV4 indicates Short in Selectable Force Limiter Squib Right Circuit.
- Common causes
- Common causes include Short circuit in the wiring harness, Faulty squib in the selectable force limiter, Corrosion or damage to the connectors in the circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1940 2015 Toyota RAV4 Description
The B1940 code on a 2015 Toyota RAV4 indicates a short in the Selectable Force Limiter Squib Right Circuit. This code is related to the vehicle's airbag system and specifically refers to an issue with the right side squib circuit of the selectable force limiter. The selectable force limiter is a safety feature in the vehicle's airbag system that helps adjust the force of the seatbelt during a collision to minimize injury to the occupants.
Common Causes of B1940 2015 Toyota RAV4
- Short circuit in the wiring harness.
- Faulty squib in the selectable force limiter.
- Corrosion or damage to the connectors in the circuit.
- Issues with the airbag control module.
- Impact or collision that damaged the airbag system components.
Symptoms of B1940 2015 Toyota RAV4
- Airbag warning light illuminated on the dashboard.
- Non-deployment of the airbag in a crash.
- Intermittent or erratic functioning of the airbag system.
- Loss of power to the airbag system.
How to Fix B1940 2015 Toyota RAV4
- Diagnose the specific cause of the short in the selectable force limiter squib right circuit using a diagnostic scan tool.
- Inspect the wiring harness for any visible damage, corrosion, or loose connections. Repair or replace any damaged wiring.
- Test the squib in the selectable force limiter to ensure it is functioning correctly. Replace the squib if necessary.
- Clear the diagnostic trouble codes from the vehicle's computer system and reset the airbag system.
- Perform a thorough test of the airbag system to ensure proper functionality and safety.
Cost to Fix B1940 2015 Toyota RAV4
The cost of repairing a short in the selectable force limiter squib right circuit can vary depending on the extent of the damage and the specific components that need to be replaced. In general, the repair cost can range from $200 to $600, including parts and labor. However, it's important to note that labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150. Additionally, the cost may be higher if the airbag system components need to be replaced or if more extensive repairs are required. It's recommended to consult with a professional mechanic to get an accurate estimate based on the specific circumstances of the vehicle.
Need more information about the B1940 2015 Toyota RAV4 code?
Need more information on how to fix the B1940 2015 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1940 2015 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1940 2015 Toyota RAV4 Code
1. What are the common symptoms of OBDII code B1940 in a 2015 Toyota RAV4?
The common symptoms of OBDII code B1940 (Short in Selectable Force Limiter Squib Right Circuit) in a 2015 Toyota RAV4 may include the airbag warning light illuminating on the dashboard and potential issues with the vehicle's airbag system.
2. What could cause OBDII code B1940 in a 2015 Toyota RAV4?
The possible causes of OBDII code B1940 in a 2015 Toyota RAV4 include a short circuit in the selectable force limiter squib right circuit, damaged wiring or connectors, or a faulty squib (airbag) component.
3. How serious is OBDII code B1940 in a 2015 Toyota RAV4?
OBDII code B1940 (Short in Selectable Force Limiter Squib Right Circuit) in a 2015 Toyota RAV4 is a serious issue as it indicates a potential problem with the vehicle's airbag system, which could compromise safety in the event of a collision.
4. Can OBDII code B1940 be fixed at home?
Fixing OBDII code B1940 in a 2015 Toyota RAV4 may require advanced diagnostic tools and expertise. It is recommended to consult a professional mechanic or authorized service center for proper diagnosis and repair.
5. How much does it cost to repair OBDII code B1940 in a 2015 Toyota RAV4?
The cost of repairing OBDII code B1940 in a 2015 Toyota RAV4 can vary depending on the exact cause of the issue, parts needed for replacement, and labor costs. It is advisable to obtain a detailed quote from a certified mechanic.
6. Is it safe to drive with OBDII code B1940 present in a 2015 Toyota RAV4?
It is not recommended to drive the vehicle with OBDII code B1940 (Short in Selectable Force Limiter Squib Right Circuit) in a 2015 Toyota RAV4, as it indicates a potential fault in the airbag system that could affect its functionality in the event of a collision.
7. How long does it take to repair OBDII code B1940 in a 2015 Toyota RAV4?
The repair time for OBDII code B1940 in a 2015 Toyota RAV4 can vary based on the exact cause of the issue and the availability of parts. It is best to consult with a professional mechanic for an accurate estimate.
8. Can OBDII code B1940 affect other systems in a 2015 Toyota RAV4?
While OBDII code B1940 specifically relates to a fault in the airbag system of a 2015 Toyota RAV4, it is essential to address this issue promptly to ensure the overall safety and functionality of the vehicle's systems.
9. Are there any recalls related to OBDII code B1940 in a 2015 Toyota RAV4?
It is advisable to check with the manufacturer or authorized service center for any recalls or technical service bulletins related to OBDII code B1940 (Short in Selectable Force Limiter Squib Right Circuit) in a 2015 Toyota RAV4.
10. Can resetting the OBDII system clear code B1940 in a 2015 Toyota RAV4?
Resetting the OBDII system may temporarily clear the code, but if the underlying issue causing OBDII code B1940 (Short in Selectable Force Limiter Squib Right Circuit) is not addressed, the code is likely to reappear. It is crucial to diagnose and repair the root cause of the problem.
Discuss the causes and fixes for B1940 2015 Toyota RAV4 OBDII Code
Code B1940 2015 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.