B1937 Lincoln Code - Air Bag Passenger Pressure Switch Circuit Open Fault
Quick Answer
The B1937 diagnostic trouble code (DTC) for Lincoln vehicles refers to an Air Bag Passenger Pressure Switch Circuit Open Fault. Common causes include Faulty passenger pressure switch, Damaged wiring or connectors in the circuit, Corrosion or poor connections in the circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1937 Lincoln indicates Air Bag Passenger Pressure Switch Circuit Open Fault.
- Common causes
- Common causes include Faulty passenger pressure switch, Damaged wiring or connectors in the circuit, Corrosion or poor connections in the circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1937 Lincoln Description
The B1937 diagnostic trouble code (DTC) for Lincoln vehicles refers to an Air Bag Passenger Pressure Switch Circuit Open Fault. This means that there is an issue with the circuit that controls the passenger side airbag's pressure switch, which is responsible for detecting whether a passenger is seated in the front passenger seat.
Common Causes of B1937 Lincoln
- Faulty passenger pressure switch
- Damaged wiring or connectors in the circuit
- Corrosion or poor connections in the circuit
- Defective airbag control module
- Impact or collision causing damage to the airbag system
Symptoms of B1937 Lincoln
- Airbag warning light illuminated on the dashboard
- Inability to turn off passenger airbag when necessary
- Faulty passenger seatbelt warning system
- Intermittent or non-functioning passenger airbag deployment
How to Fix B1937 Lincoln
- Begin by diagnosing the specific cause of the open circuit fault using a diagnostic scanner to read the code and pinpoint the issue.
- Inspect the passenger pressure switch, wiring, and connectors for any damage, corrosion, or loose connections. Repair or replace as necessary.
- Test the circuit for continuity and proper electrical flow. Repair any breaks or discontinuities in the circuit.
- Clear the DTC from the airbag control module to reset the system and ensure the code does not reappear.
- Perform a thorough test of the airbag system to verify that the issue has been resolved and the passenger airbag functions correctly.
Cost to Fix B1937 Lincoln
The typical repair costs for addressing an Air Bag Passenger Pressure Switch Circuit Open Fault can range from $200 to $500, depending on the specific cause of the issue and the extent of repairs needed. This estimate includes parts and labor, but actual costs may vary based on the location, vehicle make and model, and the rates of the auto repair shop. It is advisable to consult with a trusted mechanic or shop to get a more accurate estimate for this repair.
Need more information about the B1937 Lincoln code?
Need more information on how to fix the B1937 Lincoln code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1937 Lincoln code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1937 Lincoln Code
1. What are the common symptoms of OBDII code B1937 in a Lincoln related to the Air Bag Passenger Pressure Switch Circuit Open Fault?
- Common symptoms include the airbag warning light illuminating on the dashboard and potential non-deployment of the passenger side airbag in the event of a crash.
2. What are the possible causes of the Air Bag Passenger Pressure Switch Circuit Open Fault code B1937 in a Lincoln?
- The code B1937 can be triggered by a faulty passenger pressure switch, damaged wiring or connectors in the airbag system, or a malfunctioning airbag control module.
3. How can I diagnose the Air Bag Passenger Pressure Switch Circuit Open Fault in my Lincoln when code B1937 is present?
- To diagnose the issue, you may need to perform a thorough inspection of the passenger pressure switch, check the wiring and connectors for any damage, and use an OBDII scanner to retrieve and clear the fault code.
4. Can I drive my Lincoln with the OBDII code B1937 related to the Air Bag Passenger Pressure Switch Circuit Open Fault?
- It is not recommended to drive the vehicle with a fault code related to the airbag system, as it may compromise the safety features of the vehicle in the event of a collision.
5. How can I repair the Air Bag Passenger Pressure Switch Circuit Open Fault in my Lincoln?
- Repairing the issue may involve replacing the faulty passenger pressure switch, repairing or replacing damaged wiring and connectors, or reprogramming the airbag control module to clear the fault code.
6. Are there any safety precautions I should take when working on the airbag system to address code B1937 in my Lincoln?
- It is crucial to disconnect the vehicle's battery and wait for at least 10 minutes before working on the airbag system to avoid accidental deployment and potential injury.
7. Is it possible to reset the OBDII code B1937 related to the Air Bag Passenger Pressure Switch Circuit Open Fault in my Lincoln without fixing the underlying issue?
- While clearing the fault code with an OBDII scanner may temporarily turn off the warning light, the code is likely to reappear if the root cause of the issue is not addressed.
8. Can a DIY enthusiast with some automotive knowledge repair the Air Bag Passenger Pressure Switch Circuit Open Fault in a Lincoln?
- Depending on the individual's skill level and access to tools, some DIY enthusiasts may be able to diagnose and repair simple issues related to the airbag system, but complex problems may require professional assistance.
9. What should I do if I cannot resolve the OBDII code B1937 Air Bag Passenger Pressure Switch Circuit Open Fault in my Lincoln?
- If you are unable to resolve the issue on your own, it is recommended to seek assistance from a qualified mechanic or an authorized Lincoln dealership for proper diagnosis and repair.
10. How can regular maintenance help prevent the occurrence of OBDII code B1937 in a Lincoln related to the Air Bag Passenger Pressure Switch Circuit Open Fault?
- Regularly inspecting and maintaining the airbag system, including checking for loose connections and damaged components, can help prevent issues like the B1937 fault code from occurring.
Discuss the causes and fixes for B1937 Lincoln OBDII Code
Code B1937 Lincoln comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.