B1933 Ford Code - Air Bag Passenger Circuit Open Fault
Quick Answer
The B1933 Ford diagnostic trouble code (DTC) indicates an issue with the airbag passenger circuit being open, which means that there is a break or interruption in the circuit that prevents the airbag system from functioning properly. Common causes include A loose or damaged connection in the wiring harness leading to the passenger airbag, A faulty airbag sensor that is not detecting the presence of a passenger in the seat, A malfunctioning airbag module that is not sending the proper signals to deploy the airbag. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1933 Ford indicates Air Bag Passenger Circuit Open Fault.
- Common causes
- Common causes include A loose or damaged connection in the wiring harness leading to the passenger airbag, A faulty airbag sensor that is not detecting the presence of a passenger in the seat, A malfunctioning airbag module that is not sending the proper signals to deploy the airbag.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1933 Ford Description
The B1933 Ford diagnostic trouble code (DTC) indicates an issue with the airbag passenger circuit being open, which means that there is a break or interruption in the circuit that prevents the airbag system from functioning properly. The airbag system is a critical safety feature in modern vehicles that is designed to deploy in the event of a collision to protect occupants from serious injury. When this code is triggered, it means that the airbag on the passenger side may not deploy as intended, increasing the risk of injury in the event of an accident.
Common Causes of B1933 Ford
- A loose or damaged connection in the wiring harness leading to the passenger airbag.
- A faulty airbag sensor that is not detecting the presence of a passenger in the seat.
- A malfunctioning airbag module that is not sending the proper signals to deploy the airbag.
- Damage to the airbag itself, such as tears or punctures, that prevent it from inflating properly.
- Corrosion or rust on the connectors or terminals in the airbag system, leading to poor electrical connections.
Symptoms of B1933 Ford
- The airbag warning light on the dashboard may illuminate, indicating a problem with the airbag system.
- The airbag system may fail to deploy properly in the event of a collision, putting the passenger at risk of injury.
- The vehicle may fail a state inspection or emissions test due to the airbag system issue.
- The diagnostic trouble code B1933 may be stored in the vehicle's onboard computer system, triggering the check engine light.
How to Fix B1933 Ford
- Begin by inspecting the wiring harness and connectors in the passenger airbag circuit for any signs of damage or corrosion. Repair or replace any damaged components as needed.
- Check the airbag sensor and module for proper operation, testing them according to the manufacturer's specifications. Replace any faulty components.
- If the airbag itself is damaged, it will need to be replaced to ensure proper deployment in the event of a collision.
- Clear the diagnostic trouble code from the vehicle's computer system using a scan tool after completing the repairs.
- Test the airbag system to ensure that it is functioning correctly and that the airbag deploys as intended.
Cost to Fix B1933 Ford
The cost of repairing a B1933 Ford code can vary depending on the specific cause of the issue and the extent of the repairs needed. On average, the cost of parts for this repair can range from $200 to $500, while the labor costs can range from $100 to $300. This estimate does not include diagnostic fees, taxes, or any additional services that may be required. It's essential to consult with a qualified mechanic or auto repair shop to get an accurate estimate based on your vehicle's make and model, as well as the local labor rates in your area.
Need more information about the B1933 Ford code?
Need more information on how to fix the B1933 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1933 Ford code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1933 Ford Code
1. What are common symptoms of OBDII code B1933 Ford (Air Bag Passenger Circuit Open Fault)?
- The common symptoms include the airbag warning light staying illuminated on the dashboard and the airbag system failing to deploy in the event of a collision.
2. What causes the OBDII code B1933 Ford (Air Bag Passenger Circuit Open Fault)?
- This code is typically caused by a fault in the passenger side airbag circuit, such as a loose connection, damaged wiring, or a faulty airbag sensor.
3. How serious is the OBDII code B1933 Ford (Air Bag Passenger Circuit Open Fault)?
- This code indicates a fault in the airbag system, which is a crucial safety feature. It is important to address this issue promptly to ensure the airbags deploy correctly in case of an accident.
4. Can I drive my vehicle with the OBDII code B1933 Ford (Air Bag Passenger Circuit Open Fault)?
- It is not recommended to drive the vehicle with an unresolved airbag fault as it can compromise occupant safety in the event of a collision. It is best to have the issue diagnosed and repaired as soon as possible.
5. How can I diagnose and repair the OBDII code B1933 Ford (Air Bag Passenger Circuit Open Fault)?
- Diagnosing and repairing this code typically involves inspecting the passenger side airbag circuit for loose connections, damaged wiring, or a malfunctioning sensor. A qualified mechanic with the proper diagnostic tools can help identify and resolve the issue.
6. Is it safe to reset the OBDII code B1933 Ford (Air Bag Passenger Circuit Open Fault) without fixing the underlying problem?
- It is not safe to simply reset the code without addressing the underlying issue in the airbag system. Resetting the code may temporarily turn off the warning light, but it will not fix the problem, potentially leaving the airbags non-functional.
7. How much does it cost to repair the OBDII code B1933 Ford (Air Bag Passenger Circuit Open Fault)?
- The cost of repairing this code can vary depending on the specific cause of the fault and the labor rates in your area. It is advisable to get a diagnostic assessment from a qualified mechanic to determine the exact repair cost.
8. Can a DIY enthusiast fix the OBDII code B1933 Ford (Air Bag Passenger Circuit Open Fault)?
- While some basic troubleshooting like checking for loose connections or damaged wiring can be done by DIY enthusiasts, repairing the airbag system requires specialized knowledge and tools. It is recommended to seek professional help for this issue.
9. Will the OBDII code B1933 Ford (Air Bag Passenger Circuit Open Fault) cause my vehicle to fail inspection?
- In many regions, a fault in the airbag system can lead to a failed inspection as it compromises the safety features of the vehicle. It is important to address this issue before undergoing any inspection.
10. How can I prevent the OBDII code B1933 Ford (Air Bag Passenger Circuit Open Fault) from occurring in the future?
- To prevent this code from occurring again, it is essential to ensure regular maintenance of the airbag system, including checking for loose connections, inspecting wiring for damage, and addressing any warning lights promptly.
Discuss the causes and fixes for B1933 Ford OBDII Code
Code B1933 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.