B1929 Code - Air Bag Safing Sensor Output Circuit Open
Quick Answer
The B1929 diagnostic trouble code (DTC) indicates that there is an open circuit in the airbag safing sensor output circuit. Common causes include Damaged wiring or connectors in the airbag safing sensor circuit, Faulty airbag safing sensor, Corrosion in the sensor connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1929 indicates Air Bag Safing Sensor Output Circuit Open.
- Common causes
- Common causes include Damaged wiring or connectors in the airbag safing sensor circuit, Faulty airbag safing sensor, Corrosion in the sensor connections.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1929 Description
The B1929 diagnostic trouble code (DTC) indicates that there is an open circuit in the airbag safing sensor output circuit. The airbag safing sensor is a crucial component of the vehicle's airbag system that helps to detect sudden deceleration in the event of a collision. When this sensor detects a significant impact, it sends a signal to the airbag control module to deploy the airbags and protect the occupants of the vehicle.
Common Causes of B1929
- Damaged wiring or connectors in the airbag safing sensor circuit
- Faulty airbag safing sensor
- Corrosion in the sensor connections
- Issues with the airbag control module
- Impact damage to the vehicle that affected the airbag system components
Symptoms of B1929
- Illuminated airbag warning light on the dashboard
- Airbag system failure message displayed on the instrument cluster
- Inability to turn off the airbag system warning light
- Non-deployment of airbags in a collision
How to Fix B1929
- Begin by performing a thorough visual inspection of the airbag safing sensor circuit, looking for any visible signs of damage such as frayed wires or loose connectors.
- Use a multimeter to test the continuity of the wiring in the circuit to identify any breaks or open circuits.
- Inspect the airbag safing sensor itself for any physical damage or corrosion. Replace the sensor if necessary.
- Check the connections to the airbag control module for any issues and ensure they are secure.
- Clear the DTC using a diagnostic scan tool and test the airbag system to ensure proper functionality.
Cost to Fix B1929
The cost of repairing the B1929 code can vary depending on the specific cause of the issue and the labor rates in your area. On average, the repair for an airbag safing sensor output circuit open can range from $200 to $500, including parts and labor. However, it is essential to note that prices can fluctuate based on the make and model of the vehicle, the location of the repair shop, and any additional components that may need to be replaced. It is advisable to contact local auto repair shops for a more accurate estimate based on your specific circumstances.
Need more information about the B1929 code?
Need more information on how to fix the B1929 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1929 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1929 Code
1. What are the common symptoms of OBDII code B1929 (Air Bag Safing Sensor Output Circuit Open)?
The common symptoms include the airbag warning light staying illuminated on the dashboard and potential issues with the airbag system deployment.
2. What are the possible causes of OBDII code B1929 (Air Bag Safing Sensor Output Circuit Open)?
Possible causes include damaged wiring in the airbag system, a faulty airbag safing sensor, or a poor connection in the airbag circuit.
3. How can I diagnose OBDII code B1929 (Air Bag Safing Sensor Output Circuit Open)?
Diagnosis involves using an OBDII scanner to retrieve the specific error code, inspecting the airbag system wiring for damage, and testing the airbag safing sensor and related components for proper functionality.
4. Can I still drive my vehicle with OBDII code B1929 (Air Bag Safing Sensor Output Circuit Open)?
It is not recommended to drive the vehicle with an unresolved airbag issue as it may compromise the safety of the occupants in the event of a collision.
5. How can I repair OBDII code B1929 (Air Bag Safing Sensor Output Circuit Open)?
Repair involves finding and fixing the root cause of the open circuit, which may include repairing damaged wiring, replacing the airbag safing sensor, or addressing any connectivity issues in the airbag circuit.
6. Is it safe to reset the OBDII code B1929 (Air Bag Safing Sensor Output Circuit Open) without fixing the underlying issue?
Resetting the code without addressing the root cause may temporarily turn off the warning light, but the underlying safety concern with the airbag system will remain unresolved.
7. How much does it typically cost to repair OBDII code B1929 (Air Bag Safing Sensor Output Circuit Open)?
The cost of repair can vary depending on the specific cause of the issue, but it may range from a few hundred to a few thousand dollars, including parts and labor.
8. Can a DIY enthusiast fix OBDII code B1929 (Air Bag Safing Sensor Output Circuit Open) at home?
While some basic troubleshooting like checking for loose connections or damaged wiring can be done at home, it is recommended to consult a professional for proper diagnosis and repair of airbag system issues.
9. Are there any safety precautions to consider when working on OBDII code B1929 (Air Bag Safing Sensor Output Circuit Open)?
It is crucial to disconnect the vehicle's battery before working on the airbag system to prevent accidental deployment and to follow all recommended safety procedures outlined in the vehicle's service manual.
10. How long does it take to repair OBDII code B1929 (Air Bag Safing Sensor Output Circuit Open)?
The repair time can vary depending on the complexity of the issue and the availability of parts, but it may take a few hours to a full day to complete the necessary repairs to resolve the airbag safing sensor output circuit open fault.
Discuss the causes and fixes for B1929 OBDII Code
Code B1929 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.