B1906 2017 Toyota RAV4 Code - Open in Front Pretensioner Squib Left Circuit
Quick Answer
The B1906 diagnostic trouble code for a 2017 Toyota RAV4 indicates an open circuit in the Front Pretensioner Squib Left Circuit. Common causes include Wiring damage or corrosion in the Front Pretensioner Squib Left Circuit, Loose or disconnected electrical connections in the circuit, Faulty pretensioner squib component. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1906 2017 Toyota RAV4 indicates Open in Front Pretensioner Squib Left Circuit.
- Common causes
- Common causes include Wiring damage or corrosion in the Front Pretensioner Squib Left Circuit, Loose or disconnected electrical connections in the circuit, Faulty pretensioner squib component.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1906 2017 Toyota RAV4 Description
The B1906 diagnostic trouble code for a 2017 Toyota RAV4 indicates an open circuit in the Front Pretensioner Squib Left Circuit. This refers to an issue with the pretensioner system, which is a safety feature designed to tighten the seatbelt in the event of a collision to help secure the occupant in place and reduce the risk of injury. The pretensioner squib is an explosive device that, when triggered by the vehicle's airbag control module, rapidly tightens the seatbelt.
Common Causes of B1906 2017 Toyota RAV4
- Wiring damage or corrosion in the Front Pretensioner Squib Left Circuit
- Loose or disconnected electrical connections in the circuit
- Faulty pretensioner squib component
- Impact or collision that damaged the pretensioner system
- Electrical issues in the vehicle's airbag control module
Symptoms of B1906 2017 Toyota RAV4
- Airbag warning light illuminated on the dashboard
- Seatbelt warning light flashing or staying on
- Seatbelt not retracting or tightening as usual
- Audible warning chime when driving
- Fault codes related to the pretensioner system stored in the vehicle's computer
How to Fix B1906 2017 Toyota RAV4
- Begin by diagnosing the specific cause of the open circuit in the Front Pretensioner Squib Left Circuit using a diagnostic scan tool to retrieve fault codes and perform electrical testing.
- Inspect the wiring harness and connectors for damage, corrosion, or loose connections. Repair or replace any damaged components as needed.
- Test the pretensioner squib component for continuity and proper function. Replace the squib if it is found to be faulty.
- Clear the fault codes from the vehicle's computer and perform a test drive to ensure that the issue has been resolved.
- If the problem persists, further diagnostics may be required to identify any underlying issues with the airbag control module or other related components.
Cost to Fix B1906 2017 Toyota RAV4
The typical repair costs for addressing an open circuit in the Front Pretensioner Squib Left Circuit on a 2017 Toyota RAV4 can vary depending on the specific cause of the issue and the extent of the repairs needed. Generally, the cost of parts for this repair can range from $100 to $300, while labor costs can range from $150 to $300. Overall, the total repair cost is likely to fall between $250 and $600. It is important to note that these estimates are approximate and actual costs may vary based on factors such as the shop's labor rates, location, and any additional diagnostic or repair work required. It is recommended to obtain quotes from local auto repair shops for a more accurate cost estimate.
Need more information about the B1906 2017 Toyota RAV4 code?
Need more information on how to fix the B1906 2017 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1906 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1906 2017 Toyota RAV4 Code
1. What are the common symptoms of OBDII code B1906 in a 2017 Toyota RAV4?
The common symptoms of OBDII code B1906 (Open in Front Pretensioner Squib Left Circuit) in a 2017 Toyota RAV4 may include the airbag warning light illuminating on the dashboard.
2. What does the OBDII code B1906 indicate in a 2017 Toyota RAV4?
OBDII code B1906 indicates an open circuit in the Front Pretensioner Squib Left in a 2017 Toyota RAV4, which is part of the vehicle's airbag system.
3. What are the possible causes of OBDII code B1906 in a 2017 Toyota RAV4?
Possible causes of OBDII code B1906 in a 2017 Toyota RAV4 include a faulty pretensioner squib left, damaged wiring or connectors in the circuit, or a problem with the airbag control module.
4. How can I diagnose the Open in Front Pretensioner Squib Left Circuit issue in my 2017 Toyota RAV4?
Diagnosing the Open in Front Pretensioner Squib Left Circuit issue in a 2017 Toyota RAV4 may involve checking the wiring and connectors for damage, testing the pretensioner squib left for continuity, and using a diagnostic tool to read and clear the fault code.
5. Is it safe to drive a 2017 Toyota RAV4 with OBDII code B1906?
It is not recommended to drive a 2017 Toyota RAV4 with OBDII code B1906 active, as it indicates a potential issue with the airbag system that may affect its proper functioning in the event of a collision.
6. Can I reset the OBDII code B1906 in my 2017 Toyota RAV4 myself?
While you can attempt to clear the OBDII code B1906 in a 2017 Toyota RAV4 using a diagnostic tool, it is important to address the underlying issue causing the fault code to prevent it from reoccurring.
7. How much does it cost to repair the Open in Front Pretensioner Squib Left Circuit issue in a 2017 Toyota RAV4?
The cost of repairing the Open in Front Pretensioner Squib Left Circuit issue in a 2017 Toyota RAV4 can vary depending on the specific cause of the problem, but it may involve replacing the faulty component, repairing damaged wiring, or resetting the airbag system.
8. Can I drive my 2017 Toyota RAV4 without fixing the Open in Front Pretensioner Squib Left Circuit problem?
It is not recommended to drive a 2017 Toyota RAV4 without fixing the Open in Front Pretensioner Squib Left Circuit problem, as it may compromise the effectiveness of the airbag system in the event of a collision.
9. How long does it take to repair the Open in Front Pretensioner Squib Left Circuit issue in a 2017 Toyota RAV4?
The time required to repair the Open in Front Pretensioner Squib Left Circuit issue in a 2017 Toyota RAV4 can vary depending on the extent of the damage and the availability of parts, but it is typically a task that can be completed within a few hours to a day.
10. Are there any recalls related to the Open in Front Pretensioner Squib Left Circuit issue in the 2017 Toyota RAV4?
To find out if there are any recalls related to the Open in Front Pretensioner Squib Left Circuit issue in the 2017 Toyota RAV4, you can contact your local Toyota dealership or check the National Highway Traffic Safety Administration (NHTSA) website for any relevant information.
Discuss the causes and fixes for B1906 2017 Toyota RAV4 OBDII Code
Code B1906 2017 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.