Engine-CodesScion – B1905 Scion

B1905 Scion Code - Short in Front Pretensioner Squib Left Circuit

Quick Answer

The B1905 diagnostic trouble code for Scion vehicles indicates a short in the Front Pretensioner Squib Left Circuit. Common causes include Damaged wiring harness leading to the front left pretensioner squib, Faulty front left pretensioner squib, Issues with the airbag control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1905 Scion indicates Short in Front Pretensioner Squib Left Circuit.
Common causes
Common causes include Damaged wiring harness leading to the front left pretensioner squib, Faulty front left pretensioner squib, Issues with the airbag control module.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 14, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B1905 Scion Description

The B1905 diagnostic trouble code for Scion vehicles indicates a short in the Front Pretensioner Squib Left Circuit. The pretensioner squib is a component of the seatbelt system that is responsible for tightening the seatbelt in the event of a collision, helping to restrain the occupant and reduce the risk of injury. A short in this circuit can prevent the pretensioner from functioning properly, compromising the safety of the vehicle's occupants in the event of a crash.

OBDII Code B1905 Scion - Short in Front Pretensioner Squib Left Circuit
B1905 Scion Code - Short in Front Pretensioner Squib Left Circuit

Common Causes of B1905 Scion

  1. Damaged wiring harness leading to the front left pretensioner squib.
  2. Faulty front left pretensioner squib.
  3. Issues with the airbag control module.
  4. Corrosion or poor connections in the electrical system.
  5. Impact or collision that damaged the pretensioner squib circuit.

Symptoms of B1905 Scion

  1. Airbag warning light illuminated on the dashboard.
  2. Seatbelt warning light may be illuminated.
  3. In the event of a collision, the front left seatbelt may not tighten as expected.
  4. The vehicle may fail a safety inspection due to the airbag system malfunction.

How to Fix B1905 Scion

  1. Begin by diagnosing the specific cause of the short in the Front Pretensioner Squib Left Circuit using a diagnostic scanner.
  2. Inspect the wiring harness leading to the front left pretensioner squib for any damage or corrosion. Repair or replace any damaged wiring.
  3. Test the front left pretensioner squib to determine if it is functioning properly. Replace the squib if necessary.
  4. Check the airbag control module for any faults or errors. Reset or replace the module as needed.
  5. Clear the diagnostic trouble code from the vehicle's computer and test the system to ensure that the issue has been resolved.

Cost to Fix B1905 Scion

The cost of repairing a short in the Front Pretensioner Squib Left Circuit can vary depending on the specific cause of the issue and the labor rates in your area. On average, you can expect to pay between $200 and $500 for parts and labor to resolve this problem. Keep in mind that diagnostic time and labor rates at auto repair shops can vary, so it's a good idea to get a few quotes from different shops in your area to ensure you're getting a fair price.

Need more information about the B1905 Scion code?

Need more information on how to fix the B1905 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1905 Scion code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1905 Scion Code

1. What are common symptoms of OBDII code B1905 in a Scion related to a short in the front pretensioner squib left circuit?

- Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the front left seatbelt pretensioner system.

2. What could cause the OBDII code B1905 in a Scion indicating a short in the front pretensioner squib left circuit?

- Possible causes include damaged wiring, a faulty pretensioner squib in the left front seatbelt, or a blown fuse in the airbag system.

3. How serious is the OBDII code B1905 in a Scion and should it be repaired immediately?

- This code indicates a problem with the front left seatbelt pretensioner system, which is essential for occupant safety. It is recommended to address this issue promptly to ensure proper operation of the safety system.

4. Can I drive my Scion with the OBDII code B1905 present or should I avoid driving until it's fixed?

- It is generally not advisable to drive the vehicle with an active airbag system fault code like B1905, as it could compromise the effectiveness of the seatbelt pretensioner in the event of a collision.

5. How can I diagnose and repair the OBDII code B1905 in my Scion indicating a short in the front pretensioner squib left circuit?

- Diagnosing and repairing this issue typically involves inspecting the wiring and connections in the front left seatbelt pretensioner system, checking the squib for continuity, and addressing any faults found.

6. Are there any DIY tips for fixing the OBDII code B1905 in a Scion related to a short in the front pretensioner squib left circuit?

- While some basic troubleshooting like checking for loose connections or damaged wiring can be done by DIY enthusiasts, resolving the underlying cause of the code may require specialized tools and expertise best handled by a professional mechanic.

7. How much does it cost to repair the OBDII code B1905 in a Scion caused by a short in the front pretensioner squib left circuit?

- The cost of repair can vary depending on the specific cause of the issue, but it may involve replacing the pretensioner squib, repairing wiring, or resetting the airbag system. Costs can range from a few hundred to over a thousand dollars.

8. Can resetting the OBDII code B1905 in a Scion fix the issue temporarily, or is a permanent repair necessary?

- Resetting the code may temporarily turn off the warning light, but if the underlying problem like a short in the front pretensioner squib left circuit is not addressed, the code is likely to reappear, and the safety system may remain compromised.

9. Is it safe to attempt to clear the OBDII code B1905 in a Scion without fixing the underlying problem?

- It is not recommended to clear the code without addressing the root cause, as it could mask a potentially serious safety issue with the front left seatbelt pretensioner system. Safety should always be the top priority in such cases.

10. How often does the OBDII code B1905 related to a short in the front pretensioner squib left circuit occur in Scion vehicles?

- While the occurrence rate can vary, issues with the front pretensioner squib left circuit leading to the B1905 code are not uncommon in Scion vehicles, especially as they age and components wear out. Regular maintenance and inspections can help prevent such faults.

Discuss the causes and fixes for B1905 Scion OBDII Code

Code B1905 Scion comments

No comments found for this page.