B1879 Ford Code - Seat Belt Driver Pretensioner Circuit Short To Ground
Quick Answer
The B1879 Ford code indicates a problem with the seat belt driver pretensioner circuit, specifically a short to ground. Common causes include Damaged wiring or connectors in the seat belt pretensioner circuit, Faulty seat belt pretensioner module, Corrosion or moisture in the circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1879 Ford indicates Seat Belt Driver Pretensioner Circuit Short To Ground.
- Common causes
- Common causes include Damaged wiring or connectors in the seat belt pretensioner circuit, Faulty seat belt pretensioner module, Corrosion or moisture in the circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1879 Ford Description
The B1879 Ford code indicates a problem with the seat belt driver pretensioner circuit, specifically a short to ground. The seat belt pretensioner is a safety feature that tightens the seat belt in the event of a collision, reducing the forward movement of the occupant and minimizing the risk of injury. A short to ground in this circuit means that there is an unintended connection between the pretensioner and the vehicle's ground, which can prevent the pretensioner from functioning properly.
Common Causes of B1879 Ford
- Damaged wiring or connectors in the seat belt pretensioner circuit.
- Faulty seat belt pretensioner module.
- Corrosion or moisture in the circuit.
- Impact or collision that damaged the seat belt pretensioner system.
- Manufacturing defect in the seat belt pretensioner components.
Symptoms of B1879 Ford
- Airbag warning light illuminated on the dashboard.
- Seat belt warning light stays on.
- Seat belt pretensioner does not engage during sudden braking or collision.
- Audible warning chime related to seat belt system.
How to Fix B1879 Ford
- Begin by diagnosing the specific cause of the short to ground in the seat belt pretensioner circuit using a diagnostic scanner.
- Inspect the wiring and connectors for any damage, corrosion, or loose connections. Repair or replace as needed.
- Test the seat belt pretensioner module for proper functionality and replace if faulty.
- Clear the diagnostic trouble codes from the vehicle's system and perform a test drive to ensure the issue has been resolved.
- If the problem persists, consult a professional technician for further diagnosis and repair.
Cost to Fix B1879 Ford
The cost of repairing a seat belt driver pretensioner circuit short to ground can vary depending on the extent of the damage and the specific components that need to be replaced. On average, the repair cost for this issue can range from $150 to $500, including parts and labor. However, it is important to note that labor rates at auto repair shops can vary, with hourly rates typically falling between $80 and $150. Factors such as location, vehicle make and model, and the complexity of the repair can also impact the final cost. It is recommended to obtain quotes from local auto repair shops to get a more accurate estimate for this repair.
Need more information about the B1879 Ford code?
Need more information on how to fix the B1879 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1879 Ford code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1879 Ford Code
1. What are the common symptoms of OBDII code B1879 Ford (Seat Belt Driver Pretensioner Circuit Short To Ground)?
The common symptoms include the airbag warning light illuminating on the dashboard and the seat belt pretensioner system not functioning properly.
2. What are the possible causes of OBDII code B1879 Ford?
Common causes of this code include a short to ground in the driver seat belt pretensioner circuit, damaged wiring or connectors, or a faulty seat belt pretensioner.
3. How can I diagnose OBDII code B1879 Ford?
Diagnosis involves using a scan tool to retrieve the specific fault code, inspecting the wiring and connectors for damage, and testing the resistance in the seat belt pretensioner circuit.
4. Can I drive my vehicle with OBDII code B1879 Ford present?
It is not recommended to drive the vehicle with this code active, as it indicates a potential safety issue with the seat belt pretensioner system.
5. How can I repair OBDII code B1879 Ford?
Repairing this code typically involves repairing or replacing damaged wiring, connectors, or the seat belt pretensioner itself, as well as clearing the fault code from the system.
6. Is it possible to reset OBDII code B1879 Ford without repairing the issue?
Resetting the code without addressing the underlying problem will likely result in the code reappearing once the vehicle is driven and the system performs a self-check.
7. Can a DIY enthusiast fix OBDII code B1879 Ford at home?
While some basic troubleshooting steps can be performed at home, diagnosing and repairing this code may require specialized tools and expertise, so it is recommended to consult a professional mechanic.
8. How much does it cost to repair OBDII code B1879 Ford at a repair shop?
The cost of repairing this code can vary depending on the extent of the damage and the specific repairs needed, so it is best to obtain a diagnosis and quote from a trusted repair shop.
9. Are there any recalls related to OBDII code B1879 Ford?
Recalls related to this specific OBDII code would be issued by Ford if there is a known safety issue affecting a certain range of vehicles, so it's advisable to check with the manufacturer or a dealership.
10. How can I prevent OBDII code B1879 Ford from occurring in the future?
Regularly inspecting and maintaining the seat belt pretensioner system, avoiding damage to wiring during repairs or modifications, and addressing any warning lights promptly can help prevent this code from reoccurring.
Discuss the causes and fixes for B1879 Ford OBDII Code
Code B1879 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.