B1875 Scion Code - Short in Passenger Side Front Seat Cushion Squib Circuit
Quick Answer
The B1875 diagnostic trouble code (DTC) indicates a fault in the passenger side front seat cushion squib circuit, which is part of the vehicle's airbag system. Common causes include Damaged wiring or connectors in the seat cushion squib circuit, Faulty squib or airbag module in the passenger seat, Moisture ingress leading to corrosion of electrical components. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1875 Scion indicates Short in Passenger Side Front Seat Cushion Squib Circuit.
- Common causes
- Common causes include Damaged wiring or connectors in the seat cushion squib circuit, Faulty squib or airbag module in the passenger seat, Moisture ingress leading to corrosion of electrical components.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1875 Scion Description
The B1875 diagnostic trouble code (DTC) indicates a fault in the passenger side front seat cushion squib circuit, which is part of the vehicle's airbag system. Specifically, the squib is a small explosive device that ignites to deploy the airbag in the event of a collision. A short in this circuit can prevent the airbag from deploying properly, which poses a significant safety risk. The airbag system is designed to work in conjunction with other safety features, such as seat belts, to protect occupants during an accident.
Common Causes of B1875 Scion
- Damaged wiring or connectors in the seat cushion squib circuit.
- Faulty squib or airbag module in the passenger seat.
- Moisture ingress leading to corrosion of electrical components.
- Improper installation or repair of the seat or airbag components.
- Accidental disconnection or damage during seat removal or adjustment.
Symptoms of B1875 Scion
- Airbag warning light illuminated on the dashboard.
- Inconsistent airbag deployment during diagnostic tests.
- Malfunctioning or non-responsive passenger seat adjustments.
- Unusual noises or electrical issues when adjusting the passenger seat.
- Potentially no deployment of the passenger airbag during a collision.
How to Fix B1875 Scion
- Diagnostic Scan: Use an OBD-II scanner to confirm the B1875 code and check for any additional codes related to the airbag system.
- Visual Inspection: Inspect the wiring harness and connectors under the passenger seat for damage, corrosion, or loose connections.
- Repair or Replace Wiring: If any damaged wires or connectors are found, repair or replace them as necessary to restore proper electrical continuity.
- Squib Replacement: If the squib is determined to be faulty, it will need to be replaced. This involves removing the seat and replacing the airbag module.
- Clear Codes and Test: After repairs, clear the DTCs using the scanner and perform a system test to ensure the airbag system is functioning correctly.
Cost to Fix B1875 Scion
Repair costs for addressing the B1875 code can vary significantly based on the specific issue and the labor rates in your area. On average, you can expect to pay between $200 and $800 for parts and labor. This includes costs for diagnostic time, which typically ranges from 1 to 2 hours, and any necessary replacement parts such as wiring harnesses or squibs.
Need more information about the B1875 Scion code?
Need more information on how to fix the B1875 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1875 Scion code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1875 Scion Code
1. What are the common symptoms of OBDII code B1875 related to a short in the passenger side front seat cushion squib circuit?
The common symptoms include an illuminated airbag warning light on the dashboard and potential loss of functionality of the passenger-side airbag.
2. What could cause the OBDII code B1875 indicating a short in the passenger side front seat cushion squib circuit?
Possible causes include damaged wiring, a faulty seat cushion squib, loose connections, or a malfunctioning airbag control module.
3. How serious is the issue indicated by OBDII code B1875?
This issue is related to the passenger-side airbag system, so it is important to address it promptly to ensure the airbag deploys correctly in the event of a collision.
4. Can I continue driving my Scion with the B1875 OBDII code present?
It is not recommended to continue driving the vehicle with this code present, as it may compromise the performance of the passenger-side airbag system.
5. How can I diagnose and repair OBDII code B1875 at home?
Diagnosing and repairing this code may require advanced knowledge and tools. It is recommended to consult a professional mechanic for proper diagnosis and repair.
6. Is it safe to attempt to repair the short in the passenger side front seat cushion squib circuit myself?
Due to the safety implications of working on the airbag system, it is best to leave the repair of this issue to a qualified technician with experience in handling airbag systems.
7. Will resetting the OBDII code B1875 clear the issue with the passenger side front seat cushion squib circuit?
Resetting the code may temporarily turn off the warning light, but it will not fix the underlying issue causing the short in the circuit.
8. How much does it typically cost to repair OBDII code B1875 in a Scion?
The cost of repairing this code can vary depending on the specific cause of the issue, but it may involve replacing damaged components or repairing wiring, which can range from moderate to expensive.
9. Can a faulty passenger side front seat cushion squib cause other issues in the vehicle?
While the primary concern with a faulty squib is the potential failure of the passenger-side airbag, it is possible that other electrical issues may arise as a result of the short circuit.
10. How often should I have the airbag system in my Scion inspected to prevent issues like OBDII code B1875?
It is recommended to have the airbag system inspected as part of regular maintenance or whenever you notice any warning lights related to the system to prevent issues like a short in the passenger side front seat cushion squib circuit.
Discuss the causes and fixes for B1875 Scion OBDII Code
Code B1875 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.