Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
The cost to diagnose the B1870 2002 Ford Pickup code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.
The air bag indicator is designed to illuminate for 6 (±2) seconds when the ignition switch is turned to the RUN position. This initial 6 seconds of illumination is considered normal operation and is called Prove-Out of the air bag indicator. The air bag indicator is then used to warn the driver that there is a fault in the air bag Supplemental Restraint System (SRS) .
The air bag Restrain Control Module (RCM) module monitors the air bag indicator for open and short to ground conditions. If the ECS detects an open or short to battery condition on the air bag indicator circuit, it will store a Diagnostic Trouble Code (DTC) B1870 in memory.
If the RCM detects an air bag indicator failure in addition to another SRS failure, the RCM will send a signal to the Generic Electronic Module (GEM) module to produce five sets of five tone bursts.
Need more information on how to fix the B1870 2002 Ford Pickup code? Get Access to Factory Service Manuals
Get the B1870 2002 Ford Pickup code diagnosed by a professional: Find a repair shop in your area